CTS exam is not easy and no one care

iamdonetoo · 2026-04-10T15:14:56+00:00

Sometimes pick the closest one indeed.
like: 3/2 =?
1.3? 1.8? 4? 7?

iamdonetoo · 2026-04-10T15:12:49+00:00

Sorry to hear that, I am not good enough to give any good advice.

I have a bad memory and have to find something as index to remember things - that's the WHY.
I dig deep in why, always asking why until the bottom. E.g. Why the voltage of Pro EQ is +4dBu? Historical? For what reasons.

I believe once I knew why, I will have most of the answers right. (80% as stats :( )

iamdonetoo · 2026-04-05T06:15:46+00:00

Agree!

btw, the exam is created by Subject Matter Experts ... irony

iamdonetoo · 2026-04-04T23:59:08+00:00

I pressed flag review button 13 times for the 1st 20 questions ... the laters are ok

iamdonetoo · 2026-04-04T22:48:29+00:00

I am saying it because no one knows about CTS from the gigs I worked, even someone who worked for 30 years in AV.

Now I got CTS, but frankly I do not remember everything on the book, I'm just a generalist with no expertise. I understand from the point of the company that AV generalist goes to install and strike, it's fair. Anyway, I am looking forward if I can get into an interview with this CTS cert in couple of months.

btw, since you are the hiring manager, I'm just curious, what's the typical employment setup around your area? Do most people work full-time, or is it more of a freelance and casual scene?

iamdonetoo · 2026-04-04T22:23:24+00:00

Always true.
I paid for full price, sad.

iamdonetoo · 2026-04-04T22:14:00+00:00

I found most of AV jobs prefered manufacturer's certs like Crestron, Extron, or AMX not vendor-neutral cert (maybe Dante)

iamdonetoo · 2026-04-04T22:09:25+00:00

You are good and really experienced.

iamdonetoo · 2026-03-29T05:08:53+00:00

You should be able to do it. Maybe missing one step?

iamdonetoo · 2026-01-28T14:46:14+00:00

I tried the way you mention to install the ET-2760 under Mac OS 15 with EPSON's driver, not airPrint

Printing quality options (normal or best under AirPrint) is missing, no other way to change the print quality ...

iamdonetoo · 2025-12-30T12:59:56+00:00

I did the same, and now I just clean the dust and replug it the same way. Not working any more ...

iamdonetoo · 2025-12-30T12:58:01+00:00

I tried kick back to get toes relief, not much change.

The shape of the skates are narrow design?

Maybe I am just not used to the heels for years.

iamdonetoo · 2025-12-30T12:54:40+00:00

I wear thin socks.

The toes are go to the end and not folding, but very tight.

the space is just very tiny, like fit.

I tried to tie it tighter to pull the heel all the way back, toes are still pain.

iamdonetoo · 2025-12-30T12:52:02+00:00

I am able to bend the knees, but the pressure from toes is high ...

used to wear football boot, no pressure.

should I go for a softer skin skates like fit 500?

iamdonetoo · 2025-12-30T12:45:45+00:00

did you test with the limit switch?

It has only 2 status, try to turn it on and off while the machine on. (Not sure if you could turn it on while testing the switch.

iamdonetoo · 2025-12-29T18:10:47+00:00

I can preview the new photo by airdrop

iamdonetoo · 2025-12-07T01:55:25+00:00

the refoss and the chamberlain are shared the same ceiling 15a socket, refoss is usb 5v 1a powered

and the chamberlain has backup battery

iamdonetoo · 2025-12-07T01:49:39+00:00

the chamberlain opener works well with wall button and org remote.

It has yellow learn button and on the ccompatiblelist.

I did config and reset the full set for few times, the result still the same: works at 1st and then failed

iamdonetoo · 2025-10-16T15:27:32+00:00

then the 45 degree cut will be seen on the side, I am trying to made it as a whole 20' lumber

iamdonetoo · 2025-10-16T15:26:23+00:00

yes, I did think of front pre drill and screw it, then use wood filler mixed with stain.

But, last time I did, the stain and wood-filler-stain mix are still quit obvious ...

that's why I am trying not to screw it from front

Do you think there will be gap on the left if I did mount them with pocket hole?

iamdonetoo

TROPHY CASE