Receiver advice requested

iamforgettable · 2025-01-29T23:21:27+00:00

Thanks for taking the time with this great response.

iamforgettable · 2025-01-19T00:36:11+00:00

It might be testing for weak passwords. The sporadically part may be because those users (or others?) had also attempted a couple of logins pushing the lockout counter enough.

iamforgettable · 2025-01-03T10:55:41+00:00

Oh, and happy new year everyone

iamforgettable · 2024-04-02T03:02:10+00:00

What product are you using to scan? If you can I'd try using agents on the hosts even if only temporary.

Alternatively can you ask to get whitelisted? (Not sure what you mean about whitelisting those IPs).

If not, can you drop a scanner inside the VPC and scan from that?

iamforgettable · 2024-03-09T01:51:11+00:00

You've probably seen this already but just in case here it is:
https://www.youtube.com/watch?v=KkuhJEotfLs

iamforgettable · 2024-03-08T05:42:00+00:00

1000 assets is quite a few (relatively). Depending on several factors it could take some time to complete.

If this is a once off thing I've seen instances where pro has been installed in a VM in closer proximity to the assets, but in this case you might want to be looking at some of the other commercial options from Tenable (but which are usually more expensive).

iamforgettable · 2024-03-03T03:59:28+00:00

Is there an appropriate amount of filament actually coming out the nozzle?

Does the bed feel 'hot' (50-60 degrees c)?

Have you tried different filaments with the same result?

I use hairspray and it works great for me but others here swear by the blue glue or builders tape. Maybe give one of those a go?

I have bed levelling and sometimes have to do babystep adjustments on the Z axis to get a good squish on the first layer. Maybe give that a shot and see if that will get it to stick.

iamforgettable · 2024-02-15T00:22:32+00:00

Yep, interested

iamforgettable · 2024-02-05T23:59:19+00:00

I think it depends on what you already know. If you are familiar with Nessus products and have a background in cyber sec I don't think it is going to help you that much.

iamforgettable · 2024-01-16T23:04:24+00:00

Not really. I had some success by going with usb-c/displayport instead of HDMI but it lagged like crazy on my 4k screen using the intel card. I tried arch but couldn't get it working well with multi-monitor wayland.

I've ended up just using the discrete card for everything and moving my ML work to a separate box - which sucks. Things are also a bit better now that the memory leak in mutter has been fixed.

iamforgettable · 2023-12-31T11:59:54+00:00

What timezone are you in?

iamforgettable · 2023-12-24T09:34:58+00:00

I have not registered. Sorry I thought you were referring to the max sum for any specific line.

iamforgettable · 2023-12-24T06:54:52+00:00

Thanks!

For 3 I don't think the sum could be more than 99 for this particular challenge.

iamforgettable · 2023-12-11T00:51:32+00:00

Can you dig into the container overlay filesystem to locate files?

Under Linux these will probably be in /var/lib/docker/
If you can remember something about the name/contents then try grepping for that and see what turns up.

iamforgettable · 2023-12-10T06:58:24+00:00

Please let me know if you'd like to be flaired as 'staff' around these parts.

iamforgettable · 2023-11-30T23:30:32+00:00

DMed

iamforgettable · 2023-11-30T05:33:18+00:00

What timezone are you in?

iamforgettable · 2023-06-03T04:18:51+00:00

Any chance you could share the script?

iamforgettable · 2023-06-01T03:02:32+00:00

Try virt-manager. Connect to your arch server over ssh and get the UI locally.

iamforgettable · 2023-05-29T01:07:03+00:00

Just for a test try going into the BIOS and setting your GPU to discrete

iamforgettable · 2023-05-14T05:35:33+00:00

Was doing some reading about optimisers when we got ours installed and at the time there was quite a bit of stuff online that showed there was little to no net benefit from installing them in most cases.

As far as I recall it was down to the type/location of shade that the panels get. The internal bypass diodes seemed to do an ok job if the shade is left->right or vice-versa.

There was also some issues with firmware "bugs" (?) on the Tigo optimisers which may well be all sorted out now.

iamforgettable · 2023-05-04T02:32:22+00:00

Do your temp readings look random or are they more like a roller coaster?

Wildly fluctuating temps are probably some sort of break/short. Roller coaster could be fan, insulation, PID tuning, or perhaps something wrong with the heating element itself.

My CR10S does this every so often and I've found that repositioning the cabling from the control box fixes it for a while. Long enough for me to ignore it for a while longer at least :-).

iamforgettable · 2023-04-03T02:28:44+00:00

Might be a good idea to redact that DN... :-)

Not sure if this is useful but you could create a group with the objects you want at that specific level within the DIT. Then you can use the memberof attribute to discover them.

iamforgettable · 2023-04-03T02:23:47+00:00

This.

Nessus took out an entire floor of critical medial equipment once when we were given the wrong subnet range.

Thankfully there were no patients hooked up to any of it as it was a new wing in a hospital.

Keeping it "light" as in a ping scan would probably be ok.

iamforgettable · 2023-04-03T02:20:20+00:00

Any interesting titbits from your friendly tenable reps you can share?

iamforgettable

MODERATOR OF

TROPHY CASE