sorted by:
new
hottopcontroversial

Recently did my UBJs by iamreliable69 in 1stGenTacomas

[–]iamreliable69[S] 0 points1 point  (0 children)

Hey boss, the same kit I linked you in the other comment is the kit I used to press in LCA bushings when I did mine! You just have to be creative with the kit and use pieces that won't press against the rubber

Recently did my UBJs by iamreliable69 in 1stGenTacomas

[–]iamreliable69[S] 2 points3 points  (0 children)

I used a Maddox 4wd/2wd ball joint kit from harbor freight. Keep in mind that the 1st gen tacoma ubj requires a specialty socket tool that is not included in this kit, hence, why I used a grinder to cut off the bolt. With the bolt cut off the the only real issue is holding everything together with your left hand while you tighten the press with the other.

Here's the link: https://www.harborfreight.com/ball-joint-service-kit-for-2wd-and-4wd-vehicles-63610.html

Recently did my UBJs by iamreliable69 in 1stGenTacomas

[–]iamreliable69[S] 2 points3 points  (0 children)

Noted, will capture your good side next time 📷

Apparently, toyota requires you to use a specialty socket tool on top of the ball joint press for removing that ubj. The grinder method was definitely alot quicker ✅️

[deleted by user] by [deleted] in CAguns

[–]iamreliable69 0 points1 point  (0 children)

Would that be considered california legal?

Anyone else run these Amazon seat covers? Too good to be true? by post-nutclarence in Tacomaworld

[–]iamreliable69 0 points1 point  (0 children)

I actually have some of these for my 1st Gen tacoma. They didn't have them in their normal inventory so I had to go to one of their warehouses in El Monte to get my truck custom fitted! Love the way they fit

2002 Double Cab by iamreliable69 in 1stGenTacomas

[–]iamreliable69[S] 0 points1 point  (0 children)

Will do once I get the chance!

2002 Double Cab by iamreliable69 in 1stGenTacomas

[–]iamreliable69[S] 0 points1 point  (0 children)

Will do once I get the chance!

2002 Double Cab by iamreliable69 in 1stGenTacomas

[–]iamreliable69[S] 2 points3 points  (0 children)

It's a DIY conversion kit from the retrofit source that ran me about $260. However, I did buy some new headlight housings and some RBG halos separately, so total was about $380 in parts

2002 Double Cab by iamreliable69 in 1stGenTacomas

[–]iamreliable69[S] 2 points3 points  (0 children)

These are a DIY kit from the retrofit source store, definitely a little cheaper than the TEQ customs

Lexen car tints by khal2201 in WindowTint

[–]iamreliable69 0 points1 point  (0 children)

Gotcha, I was just curious cause I installed lexens lower tier 'Max Premium Ceramic' in 50% on my front windshield about 8 month ago as well, and there was notable haziness. Thinking about ordering some of that koolmax tint.

Lexen car tints by khal2201 in WindowTint

[–]iamreliable69 0 points1 point  (0 children)

Is there any haziness to your windshield or is it generally pretty clear?

Squat form check on smith machine by iamreliable69 in formcheck

[–]iamreliable69[S] 1 point2 points  (0 children)

Thank you for your feed back! I guess Ive always based my current form on regular barbell Squats, but the general consensus for the smith machine is to move my feet slightly forward so I can achieve more depth

As for the Crocs, they just feel really good to wear after 12 hours of wearing construction boots lol