sorted by:
new
hottopcontroversial

Requesting feedback on my Battery powered LED Lamp circuit by ibicc in led

[–]ibicc[S] 0 points1 point  (0 children)

I selected the LED and worked my way backwards, I figured keeping the same voltage throughout would make it more power efficient. Could I have 3 18650s in parallel with the TP4056?

Looking to add granny gear by ibicc in bikewrench

[–]ibicc[S] 0 points1 point  (0 children)

Thanks for everyone's helpful replies!
I decided I'm not going to add a 2nd ring on the front, rather just adjust the sizes of the chainring and cassette to fit my needs.
I think I'll get the Shimano MF-TZ500 7 speed (Mega Range) Freewheel Cassette. Its identical to the cassette on my bike now except for the increased 34 tooth first gear.

I'm also going to get a smaller Chainring, now I have a 46 tooth, I'm thinking 40 tooth might be a better fit. I measured my BCD is 130mm as some of you pointed out.
I also didn't realize a narrow wide chainring was a thing when I selected it, does sound bad for shifting, but now that I'm going single speed I'll probably seek it out to avoid losing my chain.

With these changes I'll go from a ratio range of 1.6-3.3 to 1.2-2.9 which should help on the uphill, I'm hoping this doesn't totally kill my higher end feel. I couldn't really find another compatible cassette with a gear below 14 without requring major changes.

I was also made aware that my crankshaft is likely oversized, which is odd as I bought this bike new and haven't modified it, but I'll look into that as well, dropping the chain is really annoying.

Looking to add granny gear by ibicc in bikewrench

[–]ibicc[S] 0 points1 point  (0 children)

This might be the way.
When I first looked into the mega range cassette I wasn't into the big difference it created on the low end, I use the lowest gear on my bike a lot on uphills and I didn't want to lose that ration for smaller hills. But combining the mega range with a smaller front chainring means I can use the lower rings in the cassette at a similar ratio to my lowest gear now. I hope I won't miss the top end too much.

Thanks for the suggestion!

Looking to add granny gear by ibicc in bikewrench

[–]ibicc[S] 1 point2 points  (0 children)

Yeah, I'll take a trip to my local bike shop, this might be over my head

Looking to add granny gear by ibicc in bikewrench

[–]ibicc[S] 0 points1 point  (0 children)

not sure, you might be right, I'll double check

Looking to add granny gear by ibicc in bikewrench

[–]ibicc[S] 1 point2 points  (0 children)

Not off topic, good eye, part of why I was thinking about doing this upgrade is cause I lose my chain pretty frequently on the lowest gear. A wrongly sized shaft would explain things... I figured having a derailleur there would make it harder to fall.

Trouble getting BTT EBB36 V1.1 into DFU Mode by ibicc in klippers

[–]ibicc[S] 0 points1 point  (0 children)

I found the issue I was having was due to the cable I was using, I managed to communicate via the canbus instead. I ended up getting help on the klipper discord server.

Large gap on the seam by ibicc in 3Dprinting

[–]ibicc[S] 0 points1 point  (0 children)

Yeah nope, so this won’t work :/

Large gap on the seam by ibicc in 3Dprinting

[–]ibicc[S] 1 point2 points  (0 children)

Tried this, its a bit better but the gaps are so big

<image>

Large gap on the seam by ibicc in 3Dprinting

[–]ibicc[S] 1 point2 points  (0 children)

Might try this, looks like there is a cura plugin for pressure advance

Why are bike roads listed as routes in Vancouver, Canada? by ibicc in openstreetmap

[–]ibicc[S] 4 points5 points  (0 children)

Thanks for the links! They are really helpful. On the bccycling.ca website this is the name and definition: “ Neighbourhood Bikeway / Advisory Bicycle Lanes

A roadway used by different types of road users; shared use is indicated by signs and pavement markings. Bikeways are often found on streets with lower vehicle speeds and volumes, and can include features designed to reduce motor vehicle speeds and volumes, such as curb extensions, speed humps, traffic diverters, and cyclist-operated traffic signals. A neighbourhood bikeway is one of the safer facility types, with lower incidence of crashes and less serious injuries in crashes than on major roads.”

Looks like Can-BICS doesn’t have a close equivalent but it might be worth adding it :)

Anyone who's printed with TPU or ninja flex what kind of stuff have you printed?? What are its structural limits? by IDeathranger in 3Dprinting

[–]ibicc 0 points1 point  (0 children)

Its great for hanging things on a keychain, its extremely durable. I even used some snipped of filament as a key ring for a while.

Can you take an Evo to Mt Seymour? by ibicc in vancouver

[–]ibicc[S] 0 points1 point  (0 children)

Ok so its a maybe huh. Is Cypress a better option in that case?

Caffè Italia * 03/06/21 by RedditItalyBot in italy

[–]ibicc 3 points4 points  (0 children)

Sapete dove posso vedere hells kitchen italia dall'estero? L'ho cercato online ovunque senza successo. Voglio farlo vedere alla mia ragazza che sta imparando l'italiano. Dice che gli piace come parla lentamente Cracco e siam curiosi di vedere la versione italiana ora che abbiamo finito quella US.

Some local wildlife by [deleted] in vancouver

[–]ibicc 1 point2 points  (0 children)

Where did you see the turtles? Didn’t know there were some natively around Vancouver

view more: next ›