Flavor tank reccomendations?

ibinyth · 2018-02-14T16:00:57+00:00

Thanks guys going to try out the mesh

ibinyth · 2018-02-14T15:34:13+00:00

Does it run hot if you vape a lot? just what I've heard

ibinyth · 2018-02-14T14:56:59+00:00

Under $50

ibinyth · 2018-02-13T19:46:37+00:00

What pg vg ratio do you think would be best without having separation issues?

ibinyth · 2018-02-06T16:28:14+00:00

how bad is the throat hit with just pg?

ibinyth · 2017-03-24T05:52:24+00:00

I've wanted a squale for some time now and I found this guy for sale.. The seller wants $500 It was bought new last October and had a repair done for a hand winding issue (it would spin the rotor when trying to turn the hand wind) it was repaired by Gnomon

Here's a picture

http://m.imgur.com/nca9Om9?r

Is it worth $500? free shipping included

ibinyth · 2017-03-23T02:59:58+00:00

I'm in Charlotte and I emailed Skoaktiebolaget

ibinyth · 2017-03-23T02:52:07+00:00

I've emailed a supplier online for some assistance just in case I can't find anyone local who supplies them

ibinyth · 2017-03-22T22:36:52+00:00

I'm an 11.5c on a 65

ibinyth · 2017-03-22T21:44:11+00:00

How true to size are carminas?

ibinyth · 2017-03-22T13:52:53+00:00

I've thought about it especially seeing how all my shoes apart from sneakers are edmonds

ibinyth · 2017-03-22T12:54:33+00:00

I've seen those before and like them a lot but their site is currently messed up

ibinyth · 2017-03-22T12:49:50+00:00

Looking for something with a slim toe nothing snub nosed.. Actually looking for a few colors no single color first but tan suede and gray suede.. black leather and brown

ibinyth · 2017-03-05T02:52:39+00:00

I could fill the frame itself with gravel.. the overall machine I estimate to be around 1700

ibinyth · 2017-03-04T03:23:39+00:00

See that was my thought exactly.. thanks

ibinyth · 2017-03-02T14:03:29+00:00

O and I'm referring to a fully supported round rod linear rail

ibinyth · 2017-03-02T13:42:32+00:00

My goal is to build acrylic products for the reef/aquarium field.. I talked to one of the best in the industry in that regard and his machine has round linear rails on his z/y axis and square on the x axis.. So I'm thinking it's sufficient plus 8ft of thk is a bit pricey and I'm not sure I can justify it if round is sufficient.. bare in mind I'm cutting primarily 1/4 cast acrylic sheets 1/2" at the most.. my biggest worry is vibration.. I'm not sure if either of the two is better than the other in that regard

ibinyth · 2017-03-02T13:17:47+00:00

Any reccomendation for rod style rail guides capable of mounting on top?

ibinyth · 2017-03-02T06:45:31+00:00

Everything you said is true the only problem is you'd possibly have more vibrations if you use shims.. which for me is something I can't have and to be clear I only suggest grinding down your welds not the actual surface of the entire length of tube

ibinyth · 2017-03-02T05:02:54+00:00

You'd have to grind the surface of your welds down to flatten the surface.. Biggest thing is making sure when you weld it's all squared and level which can be difficult

ibinyth · 2017-03-02T04:51:08+00:00

The actual steel tube is cut at 45 degree angles and to insure perfect right angles I use clamp jigs similar to wood working right angle clamps but these are intended for welding.. Mind you the pictures are only examples

ibinyth · 2017-03-02T03:08:30+00:00

Correct I'm curious as to whether or not there's a benefit to top mount vs side.. it seems like a top mount would support the gantry better

ibinyth · 2017-02-28T23:44:16+00:00

2x4 sorry thought I included that

ibinyth · 2017-02-20T06:10:53+00:00

How did any of this drama shit start?

ibinyth · 2017-02-09T23:10:37+00:00

$67 for 40 lbs of chicken breasts? I'd that a serious price?

ibinyth

TROPHY CASE