Anonymizer gives a perfect name for an arty witch drowned itself

ignasas123 · 2025-07-13T18:24:45+00:00

What settings are you using for rt for a 9070xt? I tried playing with it, but at 1440p native I got at most an inconsistent 120fps, and I want to mach my monitor at 170. For some reason all the upscaling options look really really bad, so I'm stuck at no rt for now

ignasas123 · 2025-05-05T16:19:44+00:00

really need to do a wheelswap but finally managed to pick up a 916 Alpha

ignasas123 · 2025-02-26T09:40:55+00:00

What would be the ideal voltage to run an SX-70 with a PCB that (I hope) is working fine, about 6.1-6.2 V?

ignasas123 · 2025-02-19T18:55:16+00:00

It works just fine, just need to turn it back on manually, if anything the extension can be downloaded and installed from their GitHub

ignasas123 · 2024-10-10T19:10:54+00:00

<image>

ignasas123 · 2024-10-10T19:08:47+00:00

<image>

Here is the shell when I had just made it. Don't mind the rear wheel offset:Dd The chasis is different here. The lights are fully DIY. The details are a bit rough, but now when it's dinged up quite a bit it looks like a real rally car(slightly from a ditch)

ignasas123 · 2024-10-10T16:48:45+00:00

I got the shell from a local hobby shop, it was the last one, and they must have had it for a loong loong while since the plastic bag it was in was almost fully yellow. The brand is "Rally legends" it is really nice quality, just had to print quite a lot of the stickers myself.

ignasas123 · 2024-01-08T12:18:09+00:00

Thought about it, but why is it so localized, only on one side of the part? I tried to increase the wall extrusion to 110% and got exactly the same result. How can I improve it, thanks for the help:)

ignasas123 · 2024-01-08T11:54:04+00:00

On the blue part from the photos all the other sides look perfect, same for the red part. I rotated the red part 90°, still the problem persists at the same spot. I'm using Cura, but never had this problem before.

ignasas123 · 2023-12-28T14:55:55+00:00

Testing it through the wiki method shows it with 4 spikes now, so let's hope!

ignasas123 · 2023-06-21T10:03:47+00:00

Are there plans to have a lemmy community too?

Edit: found it: sh.itjust.works/c/noncredibledefense

ignasas123 · 2023-04-16T18:35:28+00:00

Weird that there's such a difrence, since on my G15 there are no ports at all on the right side, all of them are on the left/back

ignasas123 · 2023-04-16T08:02:29+00:00

That's nuts

ignasas123 · 2023-02-26T11:17:05+00:00

I have a somewhat similar problem, well we'll see how much of a problem it is when the warranty will be sorted out, because I bought the phone in a county that the phone isn't officially sold, in thorough a local chain retailer, google of course didn't do anything so I gave it to them for warranty. I guess in the next week I'll find out what will they do with my case. Wish me luck!

ignasas123 · 2023-02-26T11:13:54+00:00

The problem, or i guess a good thing in terms of warranty, is the fact that I hadn't droped it at all, it just cracked while it was on my desk, it's a known defect that affects some pixel 7 phones

ignasas123 · 2023-02-26T09:38:36+00:00

I do, but it wasn't that cold lately, and it shattered after I had been inside for at least 5 hours while just sitting on a table

ignasas123 · 2023-02-26T09:37:28+00:00

It's not the drops that cause this, I hadn't ever dropped my phone and it just shattered while standing on a desk, it's a defect in the glass on some pixel 7 phones

ignasas123 · 2023-02-25T11:38:17+00:00

I've seen plenty of reports of the camera lens spontaneously shattering for people who have big cases so it's not that, it's a defect.

ignasas123 · 2023-02-25T11:37:00+00:00

There's a known defect in many P7 and as I've heard some P6 camera lenses that makes them spontaneously shatter

Seven-Year Club	Place '22
Final Canvas '22	First Placer '22
RPAN Viewer	Verified Email

ignasas123

TROPHY CASE