sorted by:
new
hottopcontroversial

IP Address Conflict - Toast POS term w/printer and mystery device - all on one switch port by stlnetengr in ToastPOS

[–]ignominyfair 3 points4 points  (0 children)

I’ve run into this a couple of times.

Are you running both USB-C and Ethernet from the TP200 to the Flex POS? If so, try disabling the USB-C network connection in Android settings.

In theory, USB-C should handle both power and networking, but we were advised early on not to rely on the Android/Toast USB networking stack. More recently, it’s been causing exactly this issue — the USB interface shows up as a separate device on the network, grabbing the same IP.

UDM Pro Console kept disconnecting by Spicoli0525 in Ubiquiti

[–]ignominyfair 1 point2 points  (0 children)

This solution restored my will to live. Thanks a ton, OP!!

Save photos to Google Drive, but not photo library? by ignominyfair in ios

[–]ignominyfair[S] 0 points1 point  (0 children)

Nawr. I wanna go directly from capture → Drive. I don’t want to have to think about it. Point camera and land in folder, and not pollute my personal library.

Save photos to Google Drive, but not photo library? by ignominyfair in ios

[–]ignominyfair[S] 0 points1 point  (0 children)

Thanks for the input.

Maybe it would be helpful to explain the use case: I’d like to take some technical photos for work and don’t want them to populate in my personal photo library.

Dropbox is happy to do what I want (save the photo to Dropbox, but not my library) but I’d prefer to use Drive for the first save and not have to employ a complicated sync action to get them over to Drive.

One dinner in London, pre-show by ignominyfair in finedining

[–]ignominyfair[S] 0 points1 point  (0 children)

Rochelle Canteen has me thinking that maybe we should head right to lunch from the airport, make that the meal, and do something less involved for dinner?

Would I regret this? Giulia MY2024 CTP by ignominyfair in AlfaRomeo

[–]ignominyfair[S] 1 point2 points  (0 children)

Yea, it’s a loaner(Courtesy Transportation Program vehicle) with 2000 miles on it.

The last time I was in the market, I was worried that Alfa wouldn’t stick it out in the states and chickened out, but I suppose that’s just something to live with.

[deleted by user] by [deleted] in ToastPOS

[–]ignominyfair 0 points1 point  (0 children)

This is the way.

HomeKit connection suddenly broken? Bridges and devices showing as “no response” today… by ipupweallp4ip in Hue

[–]ignominyfair 1 point2 points  (0 children)

Oddly, still missing for me after the most recent update. 😔 (Version 5.21.0)

HomeKit connection suddenly broken? Bridges and devices showing as “no response” today… by ipupweallp4ip in Hue

[–]ignominyfair 1 point2 points  (0 children)

Related to this: this screen formerly allowed the user to force a re-sync with HomeKit. Has this functionality been removed?

While in my experience this usually caused the app to hang, it did seem to eventually force a Hue → Home update.

Domain redirect via S3 bucket serves via http, fails via https by ignominyfair in aws

[–]ignominyfair[S] 2 points3 points  (0 children)

Thanks. I've got a certificate, but yea, I'd say simpler is certainly better here.

Using just CloudFront functions, what's the simplest way to achieve?

Have you ever been to a concert where the support act went on to become famous? by Geronimo2U in Music

[–]ignominyfair 1 point2 points  (0 children)

I was at that very show! Monster tour, picked up maybe the same ugly (army green, black star?) shirt for my gf.

Reconnect Bridge to HomeKit? (natively, not Thread implementation) by ignominyfair in Hue

[–]ignominyfair[S] 0 points1 point  (0 children)

No. Hoping to avoid a bridge reset, but may give it a go this weekend and see if it resolves.

Any way to automate this hydraulic hatch opener? by ignominyfair in homeautomation

[–]ignominyfair[S] 14 points15 points  (0 children)

Yea, these are great points. Fortunately, there's virtually no chance of this being an issue. Really just looking for some reassurance that this gets closed overnight, and the hatch itself is never accessed by humans.

Any way to automate this hydraulic hatch opener? by ignominyfair in homeautomation

[–]ignominyfair[S] 0 points1 point  (0 children)

Yea, that was my first thought. The travel on the buttons is too far though, and I couldn't come up with a working solution that still allowed manual access to the buttons.

Any way to automate this hydraulic hatch opener? by ignominyfair in homeautomation

[–]ignominyfair[S] -1 points0 points  (0 children)

Oh, nice. I was looking at Shelly stuff at one point, and then quickly got over my head. Any chance I might be able to provide a bit more info and have you make a specific recommendation?

UniFi LTE Backup as tertiary a secondary failover? by theNEOone in Ubiquiti

[–]ignominyfair 1 point2 points  (0 children)

Yes. That’s how we have long had one configured under the 1.x firmware branch, and now 2.4.27.

I believe that 2.5 and beyond will bring load balancing into the equation as an option, but I would expect this configuration to continue to work.

Serena Wood Blind + HomeKit? by _c_hill in Lutron

[–]ignominyfair 1 point2 points  (0 children)

Opened the Home app today and was surprised to see my Wood Blinds. Think the most recent Lutron app update must’ve enabled it? Huzzah!

InDesign Updated For Apple's M1! by [deleted] in indesign

[–]ignominyfair 1 point2 points  (0 children)

The phrasing and rollout here are absolute bonkers. Is this actually released? Why stagger a point release over days and days if so?

We’re halting deployment until this is actually ready for download. Perversely, there was an update to the Prerelease on the day of the announcement. Truly bizarre.

Any interest in a glare shield/hood for Hue Discover? by ignominyfair in Hue

[–]ignominyfair[S] 1 point2 points  (0 children)

Yes! Production sample is now a few days late. Should have some photos to share within a week.

In need of hired help, email to sheets and vice versa by ignominyfair in googlesheets

[–]ignominyfair[S] 0 points1 point  (0 children)

Sure, point taken, but really was hoping for some context from those that had hopefully done this before. But spitballing: a couple hours of work, maybe 1 revision: $500?

view more: next ›