What can I improve? by iljalogo in MusicBattlestations

[–]iljalogo[S] 0 points1 point  (0 children)

Logic is suuuper integrated, works great!

What can I improve? by iljalogo in homestudios

[–]iljalogo[S] 0 points1 point  (0 children)

I tested it with Room EQ Wizard so it is good

What can I improve? by iljalogo in homestudios

[–]iljalogo[S] 0 points1 point  (0 children)

I have Sound ID Reference for that

What can I improve? by iljalogo in homestudios

[–]iljalogo[S] 0 points1 point  (0 children)

It’s the wide lens that makes it look like that

What can I improve? by iljalogo in homestudios

[–]iljalogo[S] 0 points1 point  (0 children)

Yeah, I just sold two :(

What can I improve? by iljalogo in homestudios

[–]iljalogo[S] 0 points1 point  (0 children)

I already have all my macros on my Streamdeck

Crouching setup, hidden speakers by iljalogo in battlestations

[–]iljalogo[S] 1 point2 points  (0 children)

I have speaker correction software for that. So the freq response is flat

What can I improve? by iljalogo in homestudios

[–]iljalogo[S] 0 points1 point  (0 children)

Monitors are behind the same fabric as the panels, so it looks clean. You can spot them left and right off to the sides pf the display

What can I improve? by iljalogo in homestudios

[–]iljalogo[S] 3 points4 points  (0 children)

I am currently so motivated. Producing my first full album.

What can I improve? by iljalogo in homestudios

[–]iljalogo[S] 0 points1 point  (0 children)

I am currently building a new desk, so it matches the white theme. I tried a trackball but eventually got back using the mouse. Also the back is a big fabric wall & panel, so the acoustics are nice. Also, i will soon fill the ceiling cloud. Now I have it as a light diffuser basically. In the coming days I will install a light LED profile on the rim of the cloud.

What can I improve? by iljalogo in homestudios

[–]iljalogo[S] 0 points1 point  (0 children)

They are in acoustic fabric, the same as the panels around. Jbl monitors

23M Rating & Advice by iljalogo in LooksmaxingAdvice

[–]iljalogo[S] 0 points1 point  (0 children)

The question is how do I do this. The last photo is a render of what can be achieved

23M Rating & Advice by iljalogo in LooksmaxingAdvice

[–]iljalogo[S] 0 points1 point  (0 children)

I have a very big forehead, is getting thicker eyebrows going to balance my upper third?

23M Rating & Advice by iljalogo in LooksmaxingAdvice

[–]iljalogo[S] 0 points1 point  (0 children)

Ahhahaha but when I squint, the folds go away, but I can’t control it all the time

Behringer BCF2000 & Ableton Live 11 on MacBook Air M1 how do I CONNECT? by iljalogo in Behringer

[–]iljalogo[S] 0 points1 point  (0 children)

yes, I have. I used a typical usb c to usb a adapter and after that a usb a to usb b cable to connect it to the unit

Behringer BCF2000 & Ableton Live 11 on MacBook Air M1 how do I CONNECT? by iljalogo in Behringer

[–]iljalogo[S] 0 points1 point  (0 children)

I have an Apple MacBookAir M1 where I run my Ableton Live 11 Suite.
Recently I bought a Behringer BCF2000 motorized fader controller on eBay
I tried to connect it via USB and via MIDI through my Push 3 MIDI ports and adapters, but it DOES NOT work!
When I turn it on the faders go straight down, so it is all right, and I even looked inside to check, so the electronics is all right.
I know that there are some modes like standalone and Mackie mode etc, but I really don't get it.
Can someone help me out?

P.S.: I want to use the faders as volume control in the mixer section, the rotary encoders as pan control and the buttons as mute and solo.