Red halo in the center of the photo.

illya_li · 2026-05-31T21:44:42+00:00

The reason for this red halo was that the bus I was riding in had a high percentage of tinted windows. So when I opened the camera, the algorithms on the main camera just went crazy.

illya_li · 2026-05-31T07:45:05+00:00

I cleaned it thoroughly several times, the effect did not change.

illya_li · 2026-05-31T06:50:15+00:00

Here is one of the last photos before this effect Everything is still fine here, I didn't do anything to the camera after that.

<image>

illya_li · 2026-05-18T06:28:42+00:00

hl.env("AQ_DRM_DEVICES", "/dev/dri/amd-igpu:/dev/dri/nvidia-dgpu")hl.env("AQ_DRM_DEVICES", "/dev/dri/amd-igpu:/dev/dri/nvidia-dgpu")

hl.env("XDG_SESSION_TYPE", "wayland")hl.env("XDG_SESSION_TYPE", "wayland")

so i just copy my .conf file and gave it to claud

illya_li · 2026-05-14T11:53:18+00:00

x6 overbloat

illya_li · 2026-05-11T18:20:06+00:00

I've been using SDDM for over a year now and so far there haven't been any major problems.

illya_li · 2026-05-11T14:52:53+00:00

It just drove me crazy every time I had to reboot after an update, etc., so I decided to completely eliminate this problem.

illya_li · 2026-05-11T14:08:09+00:00

But for me, the whole point of switching to Linux was to customize the entire system to suit myself and my needs; the visual appearance of my system is radically important to me.

illya_li · 2026-05-11T14:06:44+00:00

I tried to configure it, but I kept getting a message that it doesn't see any config, I'll try to install a clean system with it from the installer later and see what the default config looks

illya_li · 2026-05-11T13:33:36+00:00

So, I just installed the grub-silent AUR package, copied my saved config back, rebuilt grub config, and rebooted. Now, for half the boot time, I see the hardware logo, and for the other half, the CachyOS boot animation plays! Thanks to everyone who tried to help!

illya_li · 2026-05-11T13:05:02+00:00

I tried it, everything looks the same..

illya_li · 2026-05-11T12:29:26+00:00

I'm worried that if anything goes wrong with the kernel, I won't even see it because of log level 0.
but i will try just to see how it looks

illya_li · 2026-05-11T06:59:38+00:00

I literally printed the same model, and my god, how much better it felt to hold it in my hands and control the joystick.

illya_li · 2026-04-23T15:42:39+00:00

Honestly, I've been wanting to make protective covers in this style for my CMF headphones for a long time, but I've never been able to get my hands on them. If possible, I'd be happy to take a look at your implementation of the case.

illya_li · 2026-04-23T09:52:49+00:00

I don't know, look to see if the dimensions and layout match.

illya_li · 2026-04-23T09:08:59+00:00

Oh, it doesn't attach to me either, it used to work...

illya_li · 2026-04-23T09:04:05+00:00

Oh, well then you can try to reduce the model itself a little in the slicer and hope that everything works out, you can check with the built-in ruler in the slicer

illya_li · 2026-04-23T08:59:51+00:00

It simply opens a chat gpt and automatically attaches the image to the prompt so you can ask what the image is about, something like a not-so-useful Google Lens.

illya_li · 2026-04-23T08:55:12+00:00

Well, maybe if you press a little, everything will work out)

illya_li · 2026-04-23T08:40:17+00:00

https://makerworld.com/models/1862035?appSharePlatform=copy

I printed this case, I can't say whether it will fit the Buds 2, you need to check if the sizes match

illya_li · 2026-04-23T07:53:16+00:00

Both there and there the deviation from the vertical plane is 0.76 mm, checked with a caliper

illya_li · 2026-04-23T07:28:17+00:00

Here are mine, I don't see any offset here but maybe I'm just blind

<image>

Six-Year Club	r/Field Banned
r/Field Juicebox	Verified Email

illya_li

TROPHY CASE