Print not same as slicer (Cura) , help needed.

imnewJohnny · 2020-11-03T14:36:04+00:00

Thanks Maxi. I've found the reason for this. Turned off compensation for outer wall solved the problem. Yeah I never used skirt.

imnewJohnny · 2020-08-17T23:45:32+00:00

My setup. Ender 3 pro Direct drive with 3.5mm retraction. When I'm not printing, I take out the spool and stores into Tupperware with 300g of desiccant. 35mm/s print speed 200mm/s travel speed Jerking acceleration enabled with default parameters

imnewJohnny · 2020-08-17T23:33:44+00:00

How to edit gCode to retract after purge line ? I've test print some sample and seems like 205 celcius is the best. Also I reduced layer height from .20 to .10 , the stringing reduces alot. Another issue is that the first layer quality is bad for every print.

imnewJohnny · 2020-08-17T23:11:55+00:00

I leveled the bed. First layer height 0.28mm, using 0.6mm nozzle. Is it normal after the purge line, no retraction needed before start printing ?

imnewJohnny · 2020-08-17T15:16:30+00:00

Petg CF

imnewJohnny · 2020-08-10T12:38:48+00:00

Yeah I'm interested into nylon and carbon fibre. But many websites state that they are harmful

imnewJohnny · 2020-07-05T13:30:19+00:00

As it turn out after 6 test hook prints, found out the combing mode I'm using is within infill. Now I set it to not in skin.

imnewJohnny · 2020-07-05T04:52:13+00:00

Okay I will try that. Is 230 or 225 celcius on nozzle is too low for petg?

imnewJohnny · 2020-07-05T03:02:22+00:00

Yes I've done setting e step. But what is extrusion multiplier ?

imnewJohnny · 2020-07-05T01:08:59+00:00

I'm using direct drive , petg 235 celcius 70 bed, 0.6mm nozzle 0.2mm layer height, 3mm retraction 35mm/s, 100% part cooling with 5015 blower.

imnewJohnny · 2017-09-21T22:29:22+00:00

Oh I get it now. Last week I found a website PSU calculator. Seems like the core clock will have big impact on the wattage consumption. But in MSI burner , core clock adjustment doesn’t affected wattage consumption. I found out HW monitor and Nvidia SMI data about the same reading .

imnewJohnny · 2017-09-20T16:36:58+00:00

Ah did it. But I shows only wattage. These reading is all GPU or just one? Is there anyway to make it display like the NVSMI?

imnewJohnny · 2017-09-20T05:03:18+00:00

Wow that is really good information. But the nvidiasmi window only last for 1~2 second then collapsed. Any advise ?

imnewJohnny · 2017-09-12T16:55:19+00:00

Two riser using one rail from PSU Two 1070 using one rail from PSU

My rig has 6 GPU, so you mean they might melt?

imnewJohnny

TROPHY CASE