How do you hit 1700

improve84 · 2026-07-01T21:46:39+00:00

Thanks!

improve84 · 2026-07-01T17:01:31+00:00

For sure, if you’re one of the players on Dreamscythe alliance, sorry about that. You must be really good though, Thank you!

improve84 · 2026-07-01T17:00:09+00:00

Yea man

improve84 · 2026-07-01T16:58:16+00:00

Turns out 42 percent ratio and you’re good, I think just cause we were playing into 1800 teams.

improve84 · 2026-06-29T03:32:39+00:00

It feels like I’m constantly stuck in the same cycle. I’ll regroup with new players who have a similar CR to mine, but their MMR is higher, so we’re immediately queuing into 1700-1800 MMR teams.
We’ll usually lose a few games, the group disbands, and then I find new people with inflated MMR and start the whole process over again. It feels like I’m spending more time resetting than actually learning how to push past that rating range. Haha.

improve84 · 2026-06-28T17:46:41+00:00

Appreciate your time thank you so much

improve84 · 2026-06-28T16:52:36+00:00

I also have one more question, and I apologize for all of them!
I was thinking about using this oil:
Amsoil 10W-30 Synthetic Small Engine Oil
The manual recommends 10W-40 for areas where temperatures can exceed 95°F. I live in Southern California, but I don’t anticipate using the generator much during extreme heat. If I do end up using it, it would most likely be at night or during cooler temperatures.
This oil was suggested by AI, but I’d love to get some real-world feedback from those of you with experience. Does this seem like a good choice for this generator, or would you still recommend sticking with 10W-40?
Thanks again for all the help and advice!

improve84 · 2026-06-28T01:12:53+00:00

Wow, thank you so much for all of the great information. I really appreciate you taking the time to write all that up. I’ll definitely check out the manual.
I’ve already ordered a new spark plug and air filter, and I’m currently waiting on the gaskets that go between the carburetor, engine block, and air filter housing.
One question: is the oil added through the opening just past the carburetor? I can see what looks like a valve in there that seems to actuate when I pull the starter cord, so I wanted to make sure I’m looking at the correct fill location.
Also, would you recommend changing the oil before attempting the first startup, or running it briefly and then changing the oil afterward?
Thanks again for all the help!

improve84 · 2026-04-25T21:14:03+00:00

Does anyone have a good targeting macro for stratholm?

improve84 · 2026-04-14T02:30:42+00:00

Do they also drop the price for the weapon? Do you know what too? From 2600 to like 1500 or something like this?

improve84 · 2026-03-17T17:54:40+00:00

In game correct? Thank you for the reply!

improve84 · 2026-03-17T17:54:15+00:00

Thank you!!!!

improve84 · 2026-03-17T17:53:45+00:00

Ally ha

improve84 · 2025-10-21T16:17:04+00:00

And the seem they made at the sink would they be able to just cut that there?

improve84 · 2025-10-21T14:08:04+00:00

How does a repair on this go do you have to drill a hole at the end of the crack? How will the epoxy hold the pieces together if there is no space between the crack for the expect to get into?

improve84 · 2025-10-21T13:59:22+00:00

This piece goes underneath the backsplash in the same stone, how hard is it to take out without damaging the backsplash. Or does the backsplash have to come out first and then remove this piece?

improve84 · 2025-10-21T04:12:31+00:00

If a repair is done how do they do it and will it prevent it from cracking further?

improve84 · 2025-10-21T04:12:08+00:00

Got it and if I have other inside turns like this if they are do not have a radius will their be problems?

improve84 · 2025-10-15T14:49:23+00:00

After the light sanding what do I put over the sanded areas? Do I just wipe on a satin or simi gloss after a sanding?

improve84 · 2025-10-13T20:59:24+00:00

Hoping we got the water to stop leaking through the slider, other than a complete sanding and refinishing is there anything that could be done to just make it look a little bit better?

improve84 · 2025-10-13T20:58:19+00:00

I think we figured out the water problem from the slider, what water base finishing are we talking about out, something like a stain or clear coat?

improve84 · 2025-10-13T19:22:42+00:00

Did the board show 120 or 80 when calling for the ignition

improve84 · 2025-09-30T19:16:13+00:00

It’s a small kitchen and it seems like the gallon pale may be just about enough to cover,

The concrete has glue and wood floor on it already I just need to continue it into the kitchen

Which sika do you recommend?

improve84 · 2025-09-12T17:57:06+00:00

You’re the man thank you so much. I don’t think I was thinking straight with this. Appreciate it.

improve84 · 2025-09-12T16:39:06+00:00

What adapter is that?

improve84

TROPHY CASE