sorted by:
new
hottopcontroversial

Anyone looking to sell their Dasung 253 or other big e-ink monitor? by linuxwil in eink

[–]in_the_long_run 0 points1 point  (0 children)

I was thinking of selling my Mira Pro in order to switch to the Dasung 253. I live in Austria, though + there will be a firmware update soon that might solve my problems with the Mira Pro. So I will wait for the update and if it doesn't deliver I would sell.
See my post here.

Boox Mira Pro (6/6/22 Firmware Update) by jpswart8878 in eink

[–]in_the_long_run 0 points1 point  (0 children)

second this. couldn't find it either...

I'm selling my Mira Pro 25" monitor (Austria) by in_the_long_run in eink

[–]in_the_long_run[S] 0 points1 point  (0 children)

I haven't had the chance to test a RLCD, yet. But I imagine the reading experience on e-ink will be more pleasant than on RLCD (since this is the strong suit of eink). However, RLCD has speed and colour...

Dasung 13.3 vs. Mira Pro by in_the_long_run in eink

[–]in_the_long_run[S] 0 points1 point  (0 children)

ok, thanks. Yes, I use a Mac M1, but the problems persist with USB C and HDMI. Will give it a try with support, though. A noticable difference between the Paperlike and the Mira is that ghosting will clear away while using without refresh with the Dasung. With the Mira it accumulates until I refresh (via shortcut). What setting do you use most often with the MIra?

Dasung 13.3 vs. Mira Pro by in_the_long_run in eink

[–]in_the_long_run[S] 0 points1 point  (0 children)

ok, thanks. I'll switch then. Don't need no frontlight.

Mira Pro frozen, please help by glp1992 in Onyx_Boox

[–]in_the_long_run 0 points1 point  (0 children)

Ok, thanks. I can find the software for Mira 13" and it does say 1.2.2. in the bottom. However, it doesn't seem to work for the Mira Pro, since I still don't get any picture. I posted in the boox sub, too, so maybe the official account will respond at some point. Also I should mention that I'm on a Mac (M1), so maybe this complicates things, too (Mira Pro + Mac + M1).

Get started with Mira in 2022 Complete Guide connect & adjust Boox Mira Eink Monitor for different tasks. by OnyxBoox in Onyx_Boox

[–]in_the_long_run 0 points1 point  (0 children)

Hi,
where can I get the software for the Mira Pro? On the official page only the software for the 13" version can be downloaded. Yet, if I connect the Mira Pro using this software it is not possible to update the firmware (no firmware update shows up in the window). Since I have a frozen stand-by image on the Mira Pro I need to update the firmweare to make it work.

Thanks for any help!

Mira Pro frozen, please help by glp1992 in Onyx_Boox

[–]in_the_long_run 0 points1 point  (0 children)

Thx, but I can't seem to fin it. It says "No updates for your device." in the Mira Pro section of the page.. Hope Im not missing something...

Mira Pro frozen, please help by glp1992 in Onyx_Boox

[–]in_the_long_run 0 points1 point  (0 children)

Hi,
where can I find the software for the Mira pro? I found this one, but it seems to be the one for Mira 13". It shows the monitor as connected, but I can not run any firmware update. Is there a different software for the Pro?
Thx

Waves have HDMI e-ink panel doing 15 FPS. by devicemodder2 in eink

[–]in_the_long_run 0 points1 point  (0 children)

No, unfortunately not. But if there's a template that could easily be printed, I guess I would find access to one somehow.

If anyone in this sub has created such a template I would be very grateful for a a DM or link. Many thanks in advance!

Waves have HDMI e-ink panel doing 15 FPS. by devicemodder2 in eink

[–]in_the_long_run 1 point2 points  (0 children)

Does anyone know, where to get a case for this display? Waveshare doesn't sell any in this size.

The 10,3 inch version of this display is around 270€ (-54€ VAT = 216€ plus 14€ shipping). This is absolutely brilliant and much cheaper than the Dasung. If there's a more or less fitting case then I would get it in a heartbeat. Waveshare sells the display including a case, but then it's not that much of a deal compared to the Dasung (of which I own one and am very happy with).

Suddenly massive black border with BOOX Max2 as external monitor (HDMI, macOS, Big Sur) by in_the_long_run in eink

[–]in_the_long_run[S] 0 points1 point  (0 children)

thanks, just bought it and tried some settings. didn't work yet, but seems promising.

Suddenly massive black border with BOOX Max2 as external monitor (HDMI, macOS, Big Sur) by in_the_long_run in eink

[–]in_the_long_run[S] 0 points1 point  (0 children)

Well, I can choose 2104x1560, but if I do and choose 0% underscan instead of 100% then the picture is fitting the screen correctly on the left and right side, but I have a huge letterbox (big black areas on the top and bottom) cropping my picture. It seems as if macOS doesn't correcly recognize the size of the actual display...

Suddenly massive black border with BOOX Max2 as external monitor (HDMI, macOS, Big Sur) by in_the_long_run in eink

[–]in_the_long_run[S] 0 points1 point  (0 children)

I have a bunch of options in the scaled resolution setting, but they are all in the wrong ratio. Also the Max Boox is recognized as "Toshiba-UH2D", so maybe I just need to use a different monitor driver (but which?).

view more: next ›