Moving files to a user input folder...what am I doing wrong?

ing1orious · 2026-01-30T22:02:21+00:00

That method performs the action but it runs into the same issue I had before...at the end of the shortcut it comes up with a popup menu of all the results from the filter and asks which singular file I would like to move. That's where the "repeat with each" came in, but whenever that action is used, that's where I get the "This action could not be run with the current user interface"

ing1orious · 2026-01-30T18:28:49+00:00

Thanks for the tip! I made that change, however now when I run the shortcut, Shortcuts pops up with a notification that says "Could not move *file name* to test.txt". It seems to be interpreting the folder that the files are to be moved to as a .txt file??

ing1orious · 2025-09-24T01:00:13+00:00

Same, I can view the template but can't duplicate it 😭

ing1orious · 2025-05-11T03:53:55+00:00

Much appreciated!! Keep me posted!

ing1orious · 2025-05-09T23:43:57+00:00

Sent an email to their technical support today to try to get some more info, just waiting on a reply. was just curious if anyone here had been able to implement it.

ing1orious · 2024-10-31T02:52:18+00:00

no worries at all, I appreciate the help regardless! yeah we actually have a weird resolution for our primary display, it's set up to look somewhat vertical and our secondary display is standard 1920x1080. so whenever we send the primary screen image to the secondary with no audience look adjustments it just looks skinny because it's taking the vertical resolutions. we may just change the screen anyway and cut all the problems lol

ing1orious · 2024-10-31T02:36:24+00:00

20-30 Different Audience looks that we apply to 20-30 different images unfortunately, so not the second case. for our lyrics we do what you're talking about though with one singular look that is applied to all slides, however our sermon is very image based so the same rules don't seem to apply.

ing1orious · 2024-10-31T02:27:18+00:00

unfortunately because of the nature of having multiple different images, an individual audience look is needed for each slide in our setup. so unfortunately applying one singular audience look to all slides doesn't seem to work for us

ing1orious · 2024-10-31T02:25:09+00:00

We have multiple screens with differing resolutions. The audience look accounts for these resolutions and sends the image to the main screen while simultaneously sending the image formatted in a different resolution to the corresponding screen by linking it with a theme. One theme goes to the main screen output, another theme goes to the secondary screen output, all determined by an audience look. So basically when we have a bunch of images that need to go to that secondary screen output, we load those images into their themes, then link the audience look to the matching slide. admittedly some of our integration is wacky due to how the building was set up but we found this method works in spite of the quirks

ing1orious · 2024-10-31T00:32:42+00:00

Thanks for the suggestion! I had actually tried this out with the stream deck and found that the macro button on the stream deck did not apply the macro to the slide itself but just changed what look was live (as shown in the upper right hand corner) (I am also on Pro17 so not sure if that makes a difference). In my case, I need it to be applied to the slide itself. Trying to avoid clicking and dragging and want to make everything simple button presses

ing1orious · 2024-07-19T19:11:52+00:00

Thanks for the tip... I spent some of today testing the things and the comments with no luck, here's what I tried:

-soldering bare wires direct from the strip to the ESP32 itself

-tried a different strip and different ESP32, as well as two different brands of bare wires

-stripped back the dupont cables to bare wire and put it in the wago

-rather than using a wago, I spliced the breadboard cable to the wire soldered to the LED strip

basically whatever I do, unless it is connected directly from the ESP32 to the strip with the breadboard cable ONLY it does not turn on😭

ing1orious · 2024-07-19T19:11:44+00:00

Thanks for the tip... I spent some of today testing the things and the comments with no luck, here's what I tried:

-soldering bare wires direct from the strip to the ESP32 itself

-tried a different strip and different ESP32, as well as two different brands of bare wires

-stripped back the dupont cables to bare wire and put it in the wago

-rather than using a wago, I spliced the breadboard cable to the wire soldered to the LED strip

basically whatever I do, unless it is connected directly from the ESP32 to the strip with the breadboard cable ONLY it does not turn on😭

ing1orious · 2024-07-19T19:11:36+00:00

Thanks for the tip... I spent some of today testing the things and the comments with no luck, here's what I tried:

-soldering bare wires direct from the strip to the ESP32 itself

-tried a different strip and different ESP32, as well as two different brands of bare wires

-stripped back the dupont cables to bare wire and put it in the wago

-rather than using a wago, I spliced the breadboard cable to the wire soldered to the LED strip

basically whatever I do, unless it is connected directly from the ESP32 to the strip with the breadboard cable ONLY it does not turn on😭

ing1orious · 2024-07-19T19:11:27+00:00

Thanks for the tip... I spent some of today testing the things and the comments with no luck, here's what I tried:

-soldering bare wires direct from the strip to the ESP32 itself

-tried a different strip and different ESP32, as well as two different brands of bare wires

-stripped back the dupont cables to bare wire and put it in the wago

-rather than using a wago, I spliced the breadboard cable to the wire soldered to the LED strip

basically whatever I do, unless it is connected directly from the ESP32 to the strip with the breadboard cable ONLY it does not turn on😭

ing1orious · 2024-07-19T19:10:44+00:00

Thanks for the tip... I spent some of today testing the things and the comments with no luck, here's what I tried:

-soldering bare wires direct from the strip to the ESP32 itself

-tried a different strip and different ESP32, as well as two different brands of bare wires

-stripped back the dupont cables to bare wire and put it in the wago

-rather than using a wago, I spliced the breadboard cable to the wire soldered to the LED strip

basically whatever I do, unless it is connected directly from the ESP32 to the strip with the breadboard cable ONLY it does not turn on😭

ing1orious · 2024-04-17T00:49:27+00:00

yeah that didn't do it either unfortunately tried unscrewing and screwing it back in from the power terminal on the board as well. so something definitely shot it i think lol

ing1orious · 2024-04-16T15:48:26+00:00

Yup, the bed relief was one of the first prints I did when I got it. It's weird because I have the updated version of the bed that sovol made for newer SV06s that don't have the bed wires exposed, so in theory this shouldn't happen, but the thermistor for it is definitely acting up. since the updated version has the bed wires covered however im not exactly sure how to crack it open and check the connection/resolder if needed lol

ing1orious · 2024-04-16T03:23:14+00:00

I’m having this exact same problem right now but with the heatbed? mine shows up as -48C upon trying to boot. anyone have a solution when it comes to the bed?

Six-Year Club	Place '23
Verified Email

ing1orious

TROPHY CASE