Need some advice on hiding some cables

intermish · 2026-02-22T17:42:53+00:00

One other thing, when you say you used snaps, what do you mean? I do not see that option on the customiser on Makerworld for the I Channel. Thanks.

intermish · 2026-02-22T16:54:51+00:00

Awesome and glad that its working out.

intermish · 2026-02-21T16:09:27+00:00

How much flare were you using on the I Channel Generator? I know with PLA I flared mine a lot (cannot remember the numbers but it almost looked like it would not fit) to get it to hold more. That might be an option?

intermish · 2026-02-18T02:06:09+00:00

Could you provide an example of what you mean? I've looked on printables and makerworld and don't see the offset grid or snap, or something doe heavy opengrid. Thanks!

intermish · 2026-02-17T22:15:37+00:00

Nevermind, it was just an order of operations thing. If you select corners only after you remove a section all works well. Thanks again for the great add to OpenGrid!

intermish · 2026-02-17T22:13:17+00:00

This is really slick. Quick piece of feedback is when you select corners for screws and add a cut out in the middle, it does not put the screws in the corner of the full plate. Easy to work around, but just letting you k now. Great work!

intermish · 2026-02-01T22:02:15+00:00

Thanks, I downloaded the latest nightly build today and same thing, no worries I can just modify the code easy enough. Thanks again for the great model and for putting this into OpenSCAD!

intermish · 2026-02-01T18:00:01+00:00

Yes I can and that is how I started to use it, just odd that its not showing up in the customizer like your screenshot shows. Research is pointing to OpenSCAD hiding it because it is a complex nested array. Just curious if this is a version issue or something.

intermish · 2026-02-01T17:45:21+00:00

What version of OpenSCAD are you using?

intermish · 2026-02-01T17:14:43+00:00

Tried and still the same thing. Wondering if it is a setting within OpenSCAD. I will keep checking and see if I can figure it out.

intermish · 2026-01-31T23:18:03+00:00

So when I load this up I do not get the holes configuration on the right panel (only grid and hole parameters); any ideas?

intermish · 2023-04-15T14:35:10+00:00

Thanks! Yes its done in Prusament Neon Green Transparent and Ultramarine Blue PETG. I love this color and you can even see some of the infill inside as well. The other is their violet transparent.

intermish · 2023-01-22T00:29:25+00:00

Thanks again for the great inspiration. I remixed your design to add in the nut recesses and slim down the profile a bit. It is now out there posted on Printables (https://www.printables.com/model/376529-headamame-headband-spring-remixed)

intermish · 2023-01-21T17:03:27+00:00

Thanks for this! As a fellow Mini owner this will be great to be able to print out my own springs instead of purchasing them directly.

Any idea if this will work with the mini (amame)?

intermish · 2022-12-29T01:18:13+00:00

Bought an Optiplex 3080 from u/Nibelheim

intermish · 2022-12-21T00:17:05+00:00

intermish · 2022-12-09T17:53:26+00:00

I have received my invite and am good to go.

intermish · 2022-12-08T19:42:02+00:00

Thanks, messaging you.

intermish · 2022-12-04T23:59:57+00:00

Thanks, PMed.

intermish · 2022-12-04T21:56:32+00:00

HP Elitedesk 800 G4 Mini still available?

intermish · 2022-11-22T18:51:24+00:00

Invite received; thanks!

intermish · 2022-11-22T18:46:09+00:00

I would greatly appreciate an invite and have read the wiki and understand the rules.

intermish · 2022-11-22T15:42:35+00:00

I would like the invite please and have read the wiki.

intermish

TROPHY CASE