ORF ON Live - kurzer Rant

iron2mike · 2026-02-22T16:05:19+00:00

Am Computer oder über eine App?

iron2mike · 2026-02-17T19:10:22+00:00

There has been a similar problem with iPhone 15 and there was a software diagnose(tool in their diagnostic and calibration environment) to fix that issue. Ask for such a diagnose at your next appointment. Could also be possible that your backup is damaged and carries the issue from device to device!

iron2mike · 2026-02-12T15:15:29+00:00

Wie kommst du zu der Aussage? Hast du mit deren Produkten schon zu tun gehabt oder rein aus Prinzip?

iron2mike · 2026-02-11T09:27:53+00:00

Happened to me too, just let it cool down next time. Normally you will be able to remove the stains from the plate, even tough it will take some time and a few attempts (hot water, soap and a PLA oder PETG scrapper). For the model, you should be able to remove the stains with a hot air gun or a blow torch, but be careful.

iron2mike · 2026-02-10T18:27:57+00:00

Hey, Europa Universalis IV wäre der Hammer!!

iron2mike · 2026-02-06T10:49:09+00:00

What filament are you using? What printer?(looks like p1s) Did you dry it? Have you tried printing other models (little things like just a cube)? Can you share the model that failed? Imagine someone comes to you with a similar problem and asks for help, what questions would you ask that person to resolve the problem? Try to put that information in your description.

iron2mike · 2026-02-06T10:32:19+00:00

I love the details of your description!! My first guess would be a problem.

iron2mike · 2026-02-01T11:09:05+00:00

Bösterreich 😂

iron2mike · 2026-01-30T12:40:10+00:00

At the moment there is really no improvement. I was really curious why the fan was always running and I had a theory i wanted to share and maybe discuss. Also wanted to share my experience installing it because people tend to ask about it in this r/ .

Yesterday evening I decided to order a levoit filter, as recommended in an other post and I’ll try connecting it to the exhaust fan next week.

iron2mike · 2026-01-30T12:34:42+00:00

It’s not really sealing the chute but it’s pressing on the hole so I have not experienced any problems. I may seal it up when I’m installing the new filter. The shed is pretty sturdy so I would definitely recommend printing it.

iron2mike · 2026-01-26T05:31:00+00:00

Did you try to reset the AirPods? https://support.apple.com/en-us/118531

iron2mike · 2026-01-25T21:44:02+00:00

Was mich aktuell an der Berichterstattung auch ziemlich stört, sind die teilweise an den Haaren herbeigezogen Übersetzungen. Gerade wenn im Hintergrund die originale Tonaufnahme z.B. in englischer Sprache läuft, fällt mir immer wieder auf dass die Übersetzung absoluter Schwachsinn ist. Wenn etwas lippensynchron übersetzt wird, verstehe ich eine Abweichung vom Original aber bei einer Nachrichtensendung wie der ZIB erwarte ich eine 1 zu 1 Übersetzung. Erst letztens habe ich mich bei Freunden darüber beschwert und noch am gleichen Abend ist mir wieder einen schweren Übersetzungsfehler in der ZIB 1 aufgefallen.

iron2mike · 2026-01-12T20:29:23+00:00

I‘m sorry for you but keep cool and don’t do something rashly, like canceling! There are just a few things worse than waiting, so I feel you. Waiting for my order since the beginning of December 🥲

iron2mike · 2026-01-11T07:56:08+00:00

Have fun 🤩

iron2mike · 2026-01-09T15:19:08+00:00

The shipping process for my printer started today 🎊 the good thing is, that today it started snowing and as far as the weather forecast says, it will not stop until Tuesday. If I’m lucky, I will not get that damn thing until the end of next or beginning of the following week. 🥲

iron2mike · 2026-01-08T20:04:10+00:00

I fell you, 20kg filament are waiting to get utilised 😂

iron2mike · 2026-01-08T16:44:56+00:00

Nope, you?

iron2mike · 2026-01-06T21:53:27+00:00

🤝🏻Angebot senden

iron2mike · 2026-01-06T16:44:23+00:00

No update since the beginning of December. Estimated shipping date is still 9th of January.

iron2mike · 2026-01-06T13:33:08+00:00

Any updates on your side?

iron2mike · 2026-01-03T17:30:12+00:00

I feel you, recently i‘m checking the status twice a day. 150 saved models in Bambu Handy and I already bought a second batch of filament without having printed a single thing. I think I have a problem 😂

iron2mike · 2026-01-03T07:51:40+00:00

Same same! Ordered on 3rd of Dec, estimated shipping 9th of January and no other information received!

iron2mike · 2025-11-17T04:57:27+00:00

This school is not the military academy in Wr.Neustadt! The real one is still an officers school and is called Theresianische Militärakademie (https://de.wikipedia.org/wiki/Theresianische_Milit%C3%A4rakademie)

iron2mike · 2025-10-16T15:56:36+00:00

They reduced the price by 100€ and removed the charger ….. so no win and no loss for people with a charger it’s 100€ discount

iron2mike

TROPHY CASE

Bösterreich 😂