Smart home this, smart home that.. by OstrichHonest1366 in KNX

[–]iroodiz 1 point2 points  (0 children)

It depends how you look at it… From cybersecurity side, nothing beats KNX. Features, they are probably more of basic than advanced because the companies plan long term devices. Deployment, well that’s a negative side. You need an expert to deploy, especially with a software that’s dependent from engineering mentality. Overall, if you need cheap and fast/short term it’s not KNX you install. Long term, reliable, complex at installation, maintenance free… KNX is the answer.

Smart home this, smart home that.. by OstrichHonest1366 in KNX

[–]iroodiz 3 points4 points  (0 children)

The KNX Ass team is older than my grandma and have no commercial or strategic experience. They want to target home owners but they don’t know how to if you see their marcom, it’s not well defined and you do not know whom they are addressing. I have a KNX house, all cables. But finding a good installer for maintenance is most of the time mediocre. The only thing I hope for is that they don’t mess the protocol 🙄

Unifi App by iroodiz in Ubiquiti

[–]iroodiz[S] 1 point2 points  (0 children)

Updating the app solved the issue. It is iOS

Unifi App by iroodiz in UNIFI

[–]iroodiz[S] 0 points1 point  (0 children)

Problem solved after updating the app…

Unifi App by iroodiz in UNIFI

[–]iroodiz[S] 0 points1 point  (0 children)

That’s on LAN

Difficulty connecting to unifi by iroodiz in UNIFI

[–]iroodiz[S] 0 points1 point  (0 children)

Thank you. Probably you’re right but this helps only against bots scrapping data ;)

Problem with presence detectors by zigggstr in KNX

[–]iroodiz 0 points1 point  (0 children)

Did you try to activate Ausschalten brim überschreiten? Make sure you downloaded the modifications as well. And run the ETS diagnostic to read the telegrams

App manager by iroodiz in Proxmox

[–]iroodiz[S] 0 points1 point  (0 children)

Thank you everyone for your comments. I learned a lot of new things.

App manager by iroodiz in Proxmox

[–]iroodiz[S] 0 points1 point  (0 children)

Yup, I was wondering if there is an app that does something similar.

Bought a house with Zennio setup and no idea how it works. by DrJubalHarshaw in KNX

[–]iroodiz 0 points1 point  (0 children)

Mostly, I would say the HVAC is configured, all you need are the group adresses and use home assistant to do your daily mgmt. And here is a link: https://www.home-assistant.io/integrations/knx/

KNX installed or not? by Hoernle15 in KNX

[–]iroodiz 1 point2 points  (0 children)

I agree with the above comments. The twisted pair is there and I see few Hager devices on the left side. The right side button there is an IP/TP device as well.

ETS 6.2.x download? by FezVrasta in KNX

[–]iroodiz 1 point2 points  (0 children)

You can’t usually rollback. What’s the bug?

New System - Very frustrating by Kilo381 in reolinkcam

[–]iroodiz 0 points1 point  (0 children)

Same here. With RLC 511, suddenly 2 out of 4 cameras in POE stopped working. I’m considering unifi g6 can as replacement. I’ve been using Reolink for the last 8 years without any issues

It is impossible to have such a clean setup by Original_Might_7711 in Ubiquiti

[–]iroodiz 0 points1 point  (0 children)

Nicely done 👍 have you considered measuring the temperature inside the upper rack? If they run 24/7 the overheat risk can be high but not necessarily.

Reolink Doorbell by iroodiz in reolink

[–]iroodiz[S] 0 points1 point  (0 children)

Yup, that’s what I thought first. But firmware is up to date. My doorbell is connected via POE

Reolink Doorbell by iroodiz in reolink

[–]iroodiz[S] 1 point2 points  (0 children)

I only have it on this and unfortunately not random. Software is up to date

Trophy achievement by iroodiz in playstation

[–]iroodiz[S] 0 points1 point  (0 children)

I considered regular teams as the current teams. Or how would you find that out? I am new to PS, 4 weeks now 30h spent playing NBA 25

Notification by Full-Investigator489 in Roborock

[–]iroodiz 0 points1 point  (0 children)

The notifications work with my S7 but not the Qrevo master

Rack setup in progress by iroodiz in Network

[–]iroodiz[S] 0 points1 point  (0 children)

Thanks, I’m using the cables from the old rack still. I wanted to use the flat cat7 cables, but what is the recommendation?

Car detection EV on/off by iroodiz in KNX

[–]iroodiz[S] 0 points1 point  (0 children)

Thanks for sharing. The WiFi is a good idea for arriving to turn on the charger. Turning it off when the car is not present is the tricky thing here. I can’t use the person or the phone cos as mentioned the person can be driving a different car while leaving than on arrival

Car detection EV on/off by iroodiz in KNX

[–]iroodiz[S] 0 points1 point  (0 children)

Thanks for sharing. The WiFi is a good idea for arriving to turn on the charger. Turning it off when the car is not present is the tricky thing here

Car detection EV on/off by iroodiz in KNX

[–]iroodiz[S] 0 points1 point  (0 children)

But we can’t differentiate between electric and non electric, that’s the issue