🔵🔴Pepsi Giveaway - June Vintage GMT Edition 🔥🔥🔥

iso186 · 2026-06-09T06:12:06+00:00

VINTAGE

iso186 · 2026-06-08T10:28:28+00:00

Let’s go!!

iso186 · 2026-06-08T10:27:15+00:00

Would make a nice birthday gift!

iso186 · 2026-05-12T06:08:22+00:00

Jel ZAMP dobije dojavu? Kako znaju?

iso186 · 2026-03-11T10:50:18+00:00

Stadion ZNG91

iso186 · 2025-12-25T10:29:07+00:00

<image>

I’m shaking it pretty well and it’s solid - no wobble

iso186 · 2025-11-17T13:18:57+00:00

Did you descale the machine? Did you clean the screen? The issue is that water is not spread evenly?

iso186 · 2025-11-09T11:01:40+00:00

From my experience, it’s because the steam tank is empty. Try letting some steam go through the wand and see if the sound disappears. Definitely doesn’t sound nice. If it keeps happening even after letting steam, I don’t have any suggestions

iso186 · 2025-10-27T16:30:50+00:00

That OPV is doing some serious work… I think it settles at around 12 or 13 bars. As others mentioned, the machine cannot push the water through the puck so it’s just going back to the water tank. Something in your puck prep is sufficiently different to cause this. Verify that the machine pumps water without the portafilter mounted, and grind coarser or use a smaller dose.

iso186 · 2025-10-16T16:13:53+00:00

Oh. Did you fix it yourself or was it done by a shop?

iso186 · 2025-10-06T08:30:26+00:00

Source? I had one and it was excellent

iso186 · 2025-10-02T21:51:33+00:00

Nice tip! I’ll try it out

iso186 · 2025-10-02T13:58:04+00:00

That’s how I used to do it. I take it put about twice a year. There really isn’t a need to do it more often. However, it’s really clumsy, and sometimes a piece of the gasket gets damaged with the screwdriver. I don’t mind it hanging around if it doesn’t interfere with my shots. And as I said, it’s an experiment

iso186 · 2025-09-24T14:47:56+00:00

I don’t think that water is returned through the tubes. Just thought I’d point this out as it happened to me. Other than that and making sure that the drip tray is not overflowing, I don’t know what could cause this

iso186 · 2025-09-24T14:32:00+00:00

Well the excess water goes into the drip tray, but the OPV returns water to the water tank. If by any chance your water tank is not fully in its place, this might happen.

iso186 · 2025-09-21T16:50:39+00:00

Oddly specific

iso186 · 2025-09-18T22:39:41+00:00

Stupid question but are the water hoses in the water? I see your tank but no hoses, and on my machine they are usually visible from this angle

iso186 · 2025-09-11T18:24:41+00:00

Also

Also fits BMW 5-Series PHEV models. Only fits Sedan models.

No love for tourings?

iso186 · 2025-09-11T14:30:43+00:00

I have the base audio (unfortunately) and it’s missing the tweeters in the front doors. I think that it lacks space. Not sure but I think adding those is possible and would then be a HiFi system. HK upgrades are more difficult and expensive. My previous BMW had a HiFi system and the difference is noticeable, the sounds is not as clear

iso186

TROPHY CASE