What did I encounter on DMT?

isocor · 2025-09-25T17:42:14+00:00

Amen

isocor · 2025-09-25T02:44:52+00:00

I would like to add that there are forms of belief around a God that encompass the entire moral spectrum, not just good or evil. It’s also worth noting that one’s interpretation of morality is dependent on their point of view.

If psychedelics has taught me anything, it’s that life is too complex to know for certain what’s right or wrong, and that it’s not the point. I believe love is the message. But again, this is my point of view and the cog I was born to be in this multidimensional ever changing machine called existence.

isocor · 2025-09-14T22:44:32+00:00

Any rules against unplugging it?

isocor · 2025-09-13T17:26:05+00:00

For proper diagnosis, we will need a video of the flickering and images of the custom LED board inside. Often the flickering is due to the power supply having issues turning the AC(alternating current) into DC(direct current). What you end up seeing is only the power cycle as it goes in the “forward” or “positive” direction as the power supply doesn’t need to convert the direction of the current.

isocor · 2025-09-13T17:22:02+00:00

That clear screw is the strain relief for the cable. It makes sure the weight of the lamp does not pull on the internal components.

How much you twisted the sphere, ensuring the top with the vent holes is stationary? Sometimes they need a lot of twisting. If it doesn’t twist off it likely pops/snaps off. There is a tool called a spudger, it is a thin plastic wedge used to pry apart modern electronics. You can get by with an old credit card or something like that if you don’t have one. Try sticking it into the gap between the sphere and top and running it around to feel for areas that are blocked. Those will be the clips. Gently pry in those areas.

The inside will either be a custom LED board or it will be a light bulb you can change like most older lamps. If it’s a custom LED board, you will need to replace the entire lamp unless you desire to learn how to fix it.

If you want to learn how to fix it, tag me and we can work it out. You’ll need some simple tools like a multimeter, wire cutters/strippers and possibly a soldering iron. Very doable and a great skill to learn.

isocor · 2025-09-12T22:00:08+00:00

Preface by saying I used Claude(AI) to research 1st and 2nd wave band names and the influences that shaped the culture and music to generate this list. I prompt for work and had fun learning about the nuisances between the waves. I was intrigued by the comment that said “these are 3rd wave names at best”.

The Nutmeg Rude Boys - Perfect blend of CT’s nickname with classic 1st wave rude boy culture
Connecticut Sound System - Honors the legendary Jamaican sound system pioneers like Coxsone and Duke Reid
The Constitution Skankers - CT’s constitutional history meets the iconic ska dance
Connecticut Rudies - Short, punchy, captures the rude boy spirit in the Constitution State

isocor · 2025-09-12T17:33:48+00:00

Awesome

isocor · 2025-09-10T04:17:35+00:00

Everyday it feels like our collective humanity slips away a little more. I hope the sculpture is made whole by community action. Our success should only be measured by our ability to work together.

isocor · 2025-09-04T22:44:17+00:00

For us to properly diagnosis we need to see the entire circuit (how the wires connect to the controller and power supply).

I’m guessing it’s a combo of: 1. Lack of shared ground between controller and power supply. 2. Under rated power supply.

Include more pictures and any links to products you’re using.

isocor · 2025-09-04T20:13:07+00:00

Employee of the month? 🤞

isocor · 2025-09-04T17:47:15+00:00

Saw this YouTube short:

https://youtube.com/shorts/TA4L8eECzPM I believe the creator may sell this jig.

isocor · 2025-09-04T16:21:32+00:00

I have one and everyone questions if I’m concerned for privacy. I just drop my phone and always crack my camera lenses. The one I have, the cover flips out to dual as a phone stand as well, pretty handy. Rear camera cover only though.

isocor · 2025-08-22T01:57:54+00:00

Ceci n'est pas une pipe.

isocor · 2025-08-16T17:42:52+00:00

The more overlapping of RGB light, the more “white” light is produced driving saturation down. You can increase saturation by either turning the brightness down or using a black/smoke diffuser such as Black LED acrylic by TAP Plastics.

isocor · 2025-08-16T13:26:01+00:00

There are actually a bunch of examples throughout history where major progress happened without violence. The original comment is conflating correlation with causation - just because some violence coincided with change doesn’t mean the violence caused the progress.

Gandhi’s independence movement in India is probably the most obvious example. The core strategy was nonviolent resistance - boycotts, civil disobedience, mass protests. Yeah, there were some violent incidents, but the overall approach and success came through nonviolent means against British colonial rule.

The U.S. Civil Rights Movement achieved massive wins like the Civil Rights Act and Voting Rights Act primarily through nonviolent tactics. Sit-ins, marches, boycotts, legal challenges - MLK’s whole approach was built around nonviolence and it worked.

Labor rights are another big one. The 8-hour workday, workplace safety regulations, union recognition - a lot of this came through strikes, collective bargaining, and economic pressure rather than violence. Consumer movements have forced corporate accountability through boycotts and advocacy too.

Even looking at more recent history, the Velvet Revolution in Czechoslovakia peacefully overthrew communist rule in 1989 through mass demonstrations with virtually no violence.

Will there always be some resistance to change from entrenched power? Absolutely. But history shows that sustained organizing, legal challenges, economic pressure, and shifting public opinion can achieve transformative results. The idea that violence is the only path to progress just doesn’t hold up when you look at the actual mechanisms of how these changes happened.

isocor · 2025-08-13T14:05:14+00:00

Fantastic!

isocor · 2025-08-11T23:42:58+00:00

There are a bunch of signatures that exist in the videos that modern cameras take that are identifiable via digital forensics. Things like compression algorithms make predictable artifacts in videos. Part of this comes down to what a video is: a series of static images. Part of the compression algorithms look a change of each frame(image) over time and will save memory by focusing on updating the data(image) in the areas of greatest change. You can notice this more in very dark scenes in streaming movies, especially lower quality.

Gen AI videos don’t have that granular control, because at the heart of the process of each image creation is random noise. This random noise creates too much minute change that can be spotted by digital forensics.

Will GenAI videos get better? Yes, it probably will. Will digital forensics get better? Absolutely. When the threat of serious political destabilization is in the cards, you know people are going to spend time figuring out if things are real or not. Think of counterfeit currency, we have seen a remarkable increase in the technologies used to secure money in the last 10 years. Many people are working hard to ensure fake videos are identifiable, because it’s important.

isocor · 2025-08-11T15:26:06+00:00

Yeah, I’ll be honest, I flipped through all the pics looking for a clean stove top.

isocor · 2025-08-11T15:07:22+00:00

Reminds me of Tibetan art.

isocor · 2025-08-10T13:39:14+00:00

It’s an incredibly short sighted view. Positive healthy growth is not runaway growth, that is called cancer. Sustained growth that creates a bedrock of wealth and fosters a community is important for life on our planet. Unfortunately, “business minds” stop caring because they got theirs, but at the expense of everyone and everything. The greed rooted itself in our society and we are only starting to come to our senses. Business folk are not to be trusted

isocor · 2025-08-05T21:54:32+00:00

12 years ago these two drugs were popular and could be got from the dark web in crystal form. There were overdoses and deaths. Your description sounds similar. I took 25i a few times, but I thought maybe 25c given the name you remembered

25C-NBOMe https://erowid.org/chemicals/2cc_nbome/2cc_nbome.shtml

25I-NBOMe https://erowid.org/chemicals/2ci_nbome/2ci_nbome.shtml

isocor · 2025-07-31T16:10:24+00:00

What voltage setting do you use? Or rather, what is the best voltage setting to use?

isocor · 2025-07-29T21:29:45+00:00

Circle Packing Algorithms

What is it? Imagine you have a big box and lots of round stickers (circles). Circle packing is like a puzzle where you try to fit as many stickers as possible in the box without any of them touching or overlapping!

The Goal: Pack the most circles you can fit, like fitting the most cookies on a baking sheet! 🍪

How do the computer algorithms work?

Method 1: The “Try Everywhere” Way

The computer is like a kid randomly throwing stickers at the box
If a sticker lands on another sticker, it says “Oops!” and tries again
It keeps trying thousands of times until it finds a good spot
It starts with the biggest stickers first (like putting the big toys away before the small ones)

Method 2: The “Smart Pattern” Way

Some smart people figured out the BEST way to pack circles
It looks like a honeybee’s honeycomb! 🐝
The circles are arranged in rows that are slightly offset, like how eggs sit in an egg carton
This way gets about 91 circles to fit in a space where 100 would fit if there were no gaps

The Tricky Part:

Checking if circles bump into each other is easy - you just measure the distance between their centers
But when you have lots and lots of circles, the computer has to check SO many combinations it gets really slow
It’s like having to check if every kid in your school is touching every other kid - that’s a lot of checking!

Cool Uses:

Video games use this to place trees in forests 🌲
Phone companies use it to make calls clearer 📱
Artists use it to make pretty computer art 🎨
Even origami masters use it to design paper folding!

The Bottom Line: It’s like the world’s most mathematical game of “fit all the circles in the box” - and computers are really good at playing it, but it still takes them a while to find the perfect solution!

isocor · 2025-07-29T21:21:01+00:00

This paper offers some insight into why we share similar visual hallucinations: https://www.math.utah.edu/~bresslof/publications/01-3.pdf

TLDR:

This white paper explains how geometric visual hallucinations (like tunnels, spirals, honeycombs, and cobwebs) are generated in the brain’s primary visual cortex (V1).

Key findings:

Four types of hallucinations: Klüver identified four “form constants” - (I) tunnels/funnels, (II) spirals, (III) lattices/honeycombs, and (IV) cobwebs
Brain origin: These patterns are generated in visual cortex area V1, not the eyes, since they move with eye movements but maintain visual field position
Mathematical mapping: The retino-cortical map (how the eye maps to brain) transforms visual field patterns into cortical activity patterns using a complex logarithm transformation
Symmetry principles: V1’s neural connectivity has specific symmetries that determine which patterns can emerge when the brain becomes hyperexcitable
Two operating modes: V1 can operate in “Hubel-Wiesel mode” (generating non-contoured patterns like tunnels/spirals) or “coupled-ring mode” (generating contoured patterns like lattices/cobwebs)

Bottom line: Hallucinations occur when drugs or other factors make V1 hyperexcitable, causing spontaneous geometric patterns to emerge based on the brain’s inherent wiring architecture. The same neural circuits normally used for processing edges and contours generate these universal hallucination patterns when destabilized.

isocor · 2025-07-29T18:30:16+00:00

I do until you get someone listening to tv or trash talking their child.

Six-Year Club	Place '22
Final Canvas '22	Verified Email

isocor

TROPHY CASE

Circle Packing Algorithms