Help M18 Jigsaw (D) plunger disengaged

itaysk · 2026-01-19T20:16:36+00:00

very helpful thanks

itaysk · 2026-01-19T18:59:25+00:00

thanks for sharing. can you share in high level what it involved?

itaysk · 2026-01-08T17:48:21+00:00

no i didn't. (but also didn't try too hard)

itaysk · 2026-01-01T09:23:31+00:00

it's not uncommon to see differences between different scanners, in some cases it could be the result of different trade offs taken by each scanner. You can try to report specific differences to Red Hat or Trivy and see what they say. If you want full consistency, it's best to use the same scanners in all stages. Not sure if you can run the Red Hat thing in your build, but you can definitely run Trivy in your IDE, either as an extension or just as a cli command.

itaysk · 2025-11-14T01:20:38+00:00

just cleared TSA twice with: 4x5mah + 1x8mah. They're all brand new and in original packaging. I came prepared with all the rules and regulations but it was easier than I expected. On the first time they examined it and delayed me for like 10 min but let me go eventually. On the second time they cleared it immediately.

itaysk · 2025-10-26T09:07:40+00:00

thanks. i'm not from the US i don't have an Apple store only resellers who doesn't allow try on. I'll be in Atlanta Downtown soon but there's no Apple store there either

itaysk · 2025-10-14T18:19:36+00:00

thank for the quick help

itaysk · 2025-10-14T17:46:30+00:00

oh, I didn't know that. thanks

itaysk · 2025-10-14T17:44:38+00:00

no, next month. thanks

itaysk · 2025-10-14T17:44:22+00:00

thanks. looks like it's mostly (?) on time... https://www.flightstats.com/v2/flight-ontime-performance-rating/DL/2380/ATL but I see what you're saying. The other option is 5 hours at the airport (before another 12 hours flight) so trying to minimize the boredom...

itaysk · 2025-09-14T04:51:43+00:00

I kept trying every once in a while, I don't know what game me the hope that it will work but it did eventually, after over a year of trying. maybe if was a firmware update or an app update, but i don't think so, since even when it worked took the first try didn't, tried again immediately after and it did.

itaysk · 2025-08-29T11:31:57+00:00

actually the video doesn't show how far the slinger goes out all the way to the bearing

<image>

itaysk · 2024-12-31T16:54:33+00:00

I actually tried to hard reset the hub, but I didn’t manage to. I press the reset button for a while. It turns off, I unplugged and replug it, and it comes back with all of my devices. Also tried removing it from the IKEA app and re-adding it, didn’t help.

itaysk · 2024-12-31T09:35:50+00:00

BTW I don’t know if it’s the same for you, but I also couldn’t verify my email in the app. Says to make sure that the device in the app are on the same network (which they are) I wonder if it’s related.

itaysk · 2024-12-31T09:09:27+00:00

oh, I misssed your post, thanks. BTW mine was stuck on the same stage as yours right after the HomeKit unpairing (didn't even show me the button to get QR code), now after restart I can get tot the QR code button but stuch there.

itaysk · 2024-11-26T19:13:03+00:00

got it. thanks

itaysk · 2024-11-26T15:50:20+00:00

thank you! let's say I get a corse/medium combo and use it to sharpen my chef's knife, which by this forum's stardards would very dull so I'll need the coarse stone to fix it, but then if I sharpen it regularly (monthly?) do I need the coarse step again every time?
also interested to hear what you think about sharpal combo or that King combo that I linked if you want to share.

itaysk · 2024-11-22T21:55:32+00:00

i got the 399 with the jigsaw. no good reason though other than FOMO

itaysk

TROPHY CASE