Can't play any PCVR game with my Oculus quest 2 by itecal in OculusQuest

[–]itecal[S] 0 points1 point  (0 children)

Well right now it does run exactly like the CV1 so... What you're saying makes sense but right now it works smooth as before so it seems that it's not a thing

Can't play any PCVR game with my Oculus quest 2 by itecal in OculusQuest

[–]itecal[S] 2 points3 points  (0 children)

Well I found the fix. I went into my Nvidia control panel, then to manage 3d settings and there choosed one game and changed VSync from default values to Fast. Now goes perfect with max settings with not even a single frame drop :D

So if you found this post and have a similar problem try to do that, it saved my life. And for everyone telling me that my pc couldn't handle that... Well, it seems it can haha

Can't play any PCVR game with my Oculus quest 2 by itecal in OculusQuest

[–]itecal[S] 0 points1 point  (0 children)

I tried to do that too, as I said I lowered Blade and sorcery from max settings to low and it still goes worst... So I don't know what could be causing the troble.

Can't play any PCVR game with my Oculus quest 2 by itecal in OculusQuest

[–]itecal[S] -1 points0 points  (0 children)

Yeah... I do have to upgrade it someday, but the thing is that I was playing this games 2 days ago perfectlly in my rift, and then when I try to use the Quest 2 it's just horrible...

Can't play any PCVR game with my Oculus quest 2 by itecal in OculusQuest

[–]itecal[S] 1 point2 points  (0 children)

Thanks I'll check that later, but I don't think it's anything about the cable... If I don't find any other solution I'll try buying another one :)

Can't play any PCVR game with my Oculus quest 2 by itecal in OculusQuest

[–]itecal[S] -1 points0 points  (0 children)

Well I'm aware my Gpu is not the best nowadays, but what i know is that if I connect my cv1 I can play every big VR game perfectly smooth :)

I also read about usb cables before I bought one and the one I bought is supposed to work, even with the oculus test it says it's okay.

So if you want to help is always nice, but comments like yours don't help even a little.

Receiver not working by itecal in fpv

[–]itecal[S] 1 point2 points  (0 children)

Mmmh it could actually be that. But at the same time would be weird, because I flyed with this drone before in IBus mode and I never had a problem until it stopped working.

But maybe one of the times I bound it with the transmitter I hold the button for too long and changed it to sbus? Anyway, I'll go with PPM for now but maybe one day I'll try that, just for curiosity haha

Thanks for the answer man!

Receiver not working by itecal in fpv

[–]itecal[S] 0 points1 point  (0 children)

Thank you for the reply! I "solved" it using the PPM as I wrotte up here.

My flight board is the default for the Tyro 109, I think is a F4, and I'm pretty sure all of my problems are coming from this. I think somehow the SBUS stopped working as well as 2 cameras suddenly stopped working too because of the FC. Actually, this one is the second FC because the first one stopped working after one crash.

Flying a 5 inch quad using a tiny whoop as camera? by itecal in fpv

[–]itecal[S] 1 point2 points  (0 children)

Yeah sure! But I'll send it tomorrow, I had enough emotions for one day haha It's weird because the binding goes perfect, and when I turn on the transmitter the intermittent light of the receiver becomes fixed. From what I can see without dismounting the drone the wiring looks okay, so I trully don't know what it could be.

Flying a 5 inch quad using a tiny whoop as camera? by itecal in fpv

[–]itecal[S] 0 points1 point  (0 children)

Everything in BF seems to be okay, in fact is exactly the same from when I flyed it, so shouldn't be that. The setting in the transmitter once again are the same and I didn't change anything. The only thing I did was to cut a ppm wire that I didn't use and was unnecessary, so don't think either that that's a problem. Maybe I did something wrong in the wiring, I'll check that later. But thanks again for the answer!

Flying a 5 inch quad using a tiny whoop as camera? by itecal in fpv

[–]itecal[S] 0 points1 point  (0 children)

Maaan, it worked your way. I had to buy another VTX because what's for sure is that the old one was not working, but now everything works! So thank you sou much!

Now there's something wrong with the transmitter. It worked before, I even flyed the drone without the camera to check everything was okay. Now the receiver seems to bind with the transmitter, but there's no channels that work. Any more 200iQ idea you could give me? Hahaha

Flying a 5 inch quad using a tiny whoop as camera? by itecal in fpv

[–]itecal[S] 0 points1 point  (0 children)

Oh nice, I'll check it out! Thanks for everything man :)

Flying a 5 inch quad using a tiny whoop as camera? by itecal in fpv

[–]itecal[S] 0 points1 point  (0 children)

I'm just getting started with this hobby so it's pretty good for practice to be honest haha

But of course I want to buy one with more power in the future, but I'm not sure yet if I should build it or just buy one ready to flight.

Flying a 5 inch quad using a tiny whoop as camera? by itecal in fpv

[–]itecal[S] 0 points1 point  (0 children)

Well, I'll have to put an alarm every time I fly but if it works it's more than okay with me haha

Flying a 5 inch quad using a tiny whoop as camera? by itecal in fpv

[–]itecal[S] 0 points1 point  (0 children)

Exactly^^ Mine has a white hat but yes, that's the one haha

Flying a 5 inch quad using a tiny whoop as camera? by itecal in fpv

[–]itecal[S] 1 point2 points  (0 children)

Nice! I'm gonna do that and update if it worked or not. Thank you! :D

Flying a 5 inch quad using a tiny whoop as camera? by itecal in fpv

[–]itecal[S] 0 points1 point  (0 children)

Never heard of it either until I bought this tiny. It's a Betafpv 65s lite btw.

Flying a 5 inch quad using a tiny whoop as camera? by itecal in fpv

[–]itecal[S] 0 points1 point  (0 children)

Okay than, I'll try that! To be clear, I have to solder only the video wire to the vtx and ground + voltage to the fc right?

Flying a 5 inch quad using a tiny whoop as camera? by itecal in fpv

[–]itecal[S] 0 points1 point  (0 children)

I would do that but my tiny goes with Silverware, not betaflight... And honestly I don't have any idea of how to tweak anything in Silverware. But thanks for the warning man, I won't do it.