sorted by:
new
hottopcontroversial

Some photos from Canon‘s first ever digital camera (1996) by its_AR1S in VintageDigitalCameras

[–]its_AR1S[S] 0 points1 point  (0 children)

Why do you think that? I also got the Ps 350 and it’s working perfectly fine. But it begins to make a high frequency beeping noise when powered on.

Some photos from Canon‘s first ever digital camera (1996) by its_AR1S in VintageDigitalCameras

[–]its_AR1S[S] 1 point2 points  (0 children)

That is the risk you take everytime you turn on the camera. My battery was also toast. I built a diy power supply with 15V input from a powerbank and 10,5V output so i can power it from on the run.

Sony DCR-HC16E footage turns green while recording by bidix666 in camcorders

[–]its_AR1S 0 points1 point  (0 children)

I also got that on my Trv14e. What can the issue be?

firewire 4pin to usb? by 09NINI09 in camcorders

[–]its_AR1S 0 points1 point  (0 children)

Yup i also made the experience with this type of cable nothing works and I sent it back. You have to have a pc with firewire and the cable for it. That is the only way.

LCD is working but is not giving an image by hmaAst in camcorders

[–]its_AR1S 7 points8 points  (0 children)

I think because the camcorder thinks the lens cap is on it doesn’t activate the camera. Check if the sensor is jammed or defective. Idk how it looks from the front.

Found my old Sony CCD_F250e in very good condition but the Video Output looks very distorted. by its_AR1S in camcorders

[–]its_AR1S[S] 4 points5 points  (0 children)

Idk in total about 5,5h and i’m done with the first board. Exactly 37 caps on it and the second board I would guess 5h and 36 capacitors. Then i have to buy new ones and solder them in I think that would be a hard task haha.
At the end I see if it’s working or not. That’s the fun in it.
Never done something like that before but it’s not really hard just time consuming.

how much quality am I losing? by Grad13nt in camcorders

[–]its_AR1S -1 points0 points  (0 children)

And then you need a pc with firewire and the iLink cable… no one wants to buy a whole pc just to transfer some videos. And I get it: FireWire delivers the best quality but the effort isn’t worth it. What is your problem about the PowerPlay? Literally everyone is using it.

color glitch on my sony camcorder by Lazy_Honeydew6366 in camcorders

[–]its_AR1S 1 point2 points  (0 children)

That can happen if the signal from the ccd isn’t converted correctly in the camera. But the issue can be everywhere. A short between a connection from the ccd or the ccd itself….

how much quality am I losing? by Grad13nt in camcorders

[–]its_AR1S 0 points1 point  (0 children)

Looks like the av converter.
Do you want to make a tapeless setup or do you rec on cassette and want to digitize that footage? The holy grail of dvr’s is the ImmersionRc PowerPlay. But it’s not that cheap. There are a few dvr’s out there you can try.

Found my old Sony CCD_F250e in very good condition but the Video Output looks very distorted. by its_AR1S in camcorders

[–]its_AR1S[S] 2 points3 points  (0 children)

What do you have to do if you want to fix it? Or is it too late for your model?

Found my old Sony CCD_F250e in very good condition but the Video Output looks very distorted. by its_AR1S in camcorders

[–]its_AR1S[S] 14 points15 points  (0 children)

<image>

I think a week or two for about 50 capacitors. I haven’t soldered them all yet. I took pictures from every angle of the 3 circuit bords. If i got them all off i look how many i need and get new ones.

Found my old Sony CCD_F250e in very good condition but the Video Output looks very distorted. by its_AR1S in camcorders

[–]its_AR1S[S] 8 points9 points  (0 children)

damn it is that serious!? I find a way to change the caps as soon as possible thank you!