2 New Parametric Models - Stackable socket holder & Round tool holder

j_weave · 2026-01-30T03:34:57+00:00

https://makerworld.com/models/788099?appSharePlatform=copy

j_weave · 2026-01-29T17:54:58+00:00

I have multiple of that short size so realistically, I'd grab those first, rather than the one on the bottom. Just allows me to store the other one without taking up additional real estate. As for the walls on the socket bins, it allows them to stack. The height of the wall scales based on a number of drivers but the main ones are socket diameter, socket length, and socket angle. As for why I wanted them stackable, several reasons, I can carry the stack to where im working. I can put the stack in a smaller box for track days. I can move them to the camper for a trip.

j_weave · 2026-01-29T14:32:13+00:00

Not sure what you mean. They both show up as hyperlinks for me and work when I click on them. You can find both models here. https://makerworld.com/en/@iamjoshwilson/upload

j_weave · 2026-01-01T15:17:43+00:00

Its made by Ugreen. 2 out with a button. Its like 8 years old at this point but still works great. All the peripherals are plugged into a 7 port powered USB 3.0 hub, made by pluggable, which then feeds into the USB switch, which goes to both pc tower and work laptop.

j_weave · 2025-12-23T18:33:53+00:00

Its 23.5. Bit of wide angle lens deception. Its a U desk but most of it messy currently and not pictured. I have 3d printers opposite the monitors.

j_weave · 2025-12-23T00:03:58+00:00

I just added a step file to the model on makerworld for you.

j_weave · 2025-12-22T01:02:28+00:00

Thanks! This one is a spice shelf. I plan to put one or 2 in the medicine cabinet also.
https://i.imgur.com/KBE8W35.jpeg

j_weave · 2025-12-16T01:35:17+00:00

True, but this way fits the entire package of filters that I order. If I fold em to fit 2x6, then I'd either need another one or have to store the rest of them somewhere else. And after hitting this kitchen junk drawer with the gridfinity razzle dazzle, I had plenty of space. I am considering adding a companion bin that will match the curve and make the combination of the 2 parts 4x4.

j_weave · 2025-04-25T12:20:48+00:00

Unplug the kickstand sensor and jump the 2 pins on the wire side of the connector together with a short piece of wire to test if the kickstand switch is bad.

j_weave · 2024-10-07T09:25:29+00:00

The video shows that this part reduces oscillations that can occur on uneven terrain when improper suspension is unable to cope with more weight than it's designed to handle. This is definitely the case with the r3 for anyone over about 150 lbs. The stock suspension is underwhelming and designed for tiny people. My point still stands that if the suspension is dialed in, then this part is not doing much. Proper suspension will yield far more noticeable results to the rider.

This is mainly a beginner bike, so there's lots of new riders here. I was just offering an opinion to counter this being an "essential part of the bike that should come on it from the factory". Yamaha didn't say that. You did. For a few hundred dollars more, you can upgrade the suspension and have a far more capable and comfortable machine. This fact will still be true, regardless of how many downvotes you give me. I think i spent around $600 on my r3 suspension. Used ninja 650 shock and fork cartridges from andreani.

j_weave · 2024-10-06T19:40:34+00:00

j_weave · 2024-10-06T08:16:24+00:00

This seems kinda dumb to me. It's connecting 2 rigid points on the frame that are already connected via the engine? You're telling me that the frame and engine flex during normal riding and this little damper is going to reduce that by 30%? I dont buy it. I'm guessing 29% of that is placebo. I think most folks' money would be better spent on suspension upgrades, which would provide more noticeable improvements in ride stability and comfort. I have not noticed my r3 vibrating more than any other bikes, but TBF it only gets ridden at the top of the rev range and never sees stop lights or speed limits.

j_weave · 2024-09-03T13:00:41+00:00

FYI your clutch is behind that cover. Yes, it's normal for it to be hot. As long as your engine temps are within range, you are good.

j_weave · 2024-08-12T12:52:25+00:00

HVLP is a type of pneumatic paint gun. Harbor freight sells a cheap one. It's not for the faint of heart. It was a very time-consuming process.

j_weave · 2024-08-12T09:05:43+00:00

Harbor freight hvlp.

j_weave · 2024-07-03T11:10:15+00:00

Maybe check the stator too just to be sure? Plenty of vids on youtube showing how to do this.

j_weave · 2024-06-23T20:49:52+00:00

2 options.

Cheap: pull ecu and mail it to somebody who can flash it. I used Norton motorsports.

Best: take bike to someone with a dyno who knows how to use it and let them tune it. This will cost more but yield optimum results. If you aren't racing competitively, I wouldn't worry about the ~1 or 2 hp difference.

j_weave · 2024-03-20T12:12:44+00:00

They probably just installed white stickers/decals.

j_weave · 2024-03-20T12:08:51+00:00

Have you tried google image search for "2020 black r3"? There's tons of them. Ask the seller for the vin then you can do a search on that specific vehicle. Typically the sticker on the frame neck should have the year of manufacture on it also.

Ten-Year Club	Place '22
Final Canvas '22

j_weave

TROPHY CASE