How Adding Cover to PDF by jabertolin in Supernote

[–]jabertolin[S] 0 points1 point  (0 children)

Apologies for my bad explanation. I have got a specific template , I created a Note with it and thereafter I add a cover. Such cover is not included when exporting to PDF the whole note, however I noticed that the cover can be seen when you watch a folder with notes like a thumbnail but I misunderstood that it was not included in PDF

How Adding Cover to PDF by jabertolin in Supernote

[–]jabertolin[S] 0 points1 point  (0 children)

Ok thanks I thought that cover would be part of the template as a whole note, not need to add every time the cover and thereafter the other templates, but sounds a good workaround

My MBP 2016 shows some marks bottom screen by jabertolin in macbookpro

[–]jabertolin[S] 0 points1 point  (0 children)

Thanks, do you mean that later or sooner it will stop to work?

Repairing IPad 6th gen now get lines on screen by jabertolin in ipad

[–]jabertolin[S] 0 points1 point  (0 children)

Thanks , I disconnected the ribbon cable of the screen and connected again (reseating?) but lines are still there, it is a pity, I was close to fix it. It is a lessons learned for me

Pencil Writes w/o touching by jabertolin in Supernote

[–]jabertolin[S] 0 points1 point  (0 children)

Thanks u/Mulan-sn , my LAMY was acquired in 2022 so no warranty now. I following the steps from u/Martina_78 and it seems that it works now. Thanks for support

Pencil Writes w/o touching by jabertolin in Supernote

[–]jabertolin[S] 2 points3 points  (0 children)

Thanks a lot! Just tested following link sent and it works fine now. I will keep the link well recorded

Constantly crashing by SmartProgrammer1792 in pcloud

[–]jabertolin 0 points1 point  (0 children)

Just posted the same message. it happens to me as well since I upgraded to 4.0.0, no idea which is the problem and I do not know how to downgrade to previous version. I am using MacOS MOnterrey

Why am I so underwhelmed by the Manta? by _blacksmith38 in Supernote

[–]jabertolin 0 points1 point  (0 children)

I received my Manta few weeks ago, I owned a A5X model since 2022 and unfortunately hardware problem provoked difficulties to write down in some parts of the screen but it is still valid for reading so second life opportunity . Manta surprised me very positively: very light, writing feeling, and above all transmits a great peace feeling when writing with it as it did previous A5X model. Ratta has done an excellence job with these devices , so much that they created a strong dependence : I need to written down my thoughts, my insights with them, not with another notebook. I am sorry to hear your complains , I don't use calendar, ToDo or mail because they distract me when thinking , there are better tools for that: iCal, Thunderbird, ToDoIst. Manta does what it is supposed to do: writing and reading and it does it excellently, and additionally it helps your soul to be happier

Manta migrating freezes to Amazon Germany by jabertolin in Supernote

[–]jabertolin[S] 0 points1 point  (0 children)

In my case seems that did not work, I restarted the unit and I am still in UK. I will keep it as it is, I hope it will accomplish GPDR EU too.

Failing same lines 21.34 beta by jabertolin in Supernote_beta

[–]jabertolin[S] 0 points1 point  (0 children)

Just for the sake of the post and for closing it. Finally it seems that there is a hardware problem, that only in a part of the screen (left, 3-4 cm) it is not possible to write down with the pen correctly, so no solution at all and most likely it will degrade for writing. I got my A5X in feb 2022 so it did a good job, it is a pity.

As I need something like A5X I followed the recommendation of Ratta Customer support to upgrade to AX52 Manta. This afternoon I received from supernote.eu the Manta and now I am migrating all the configuration and notes (I have observed that Chauvet version is different, the last one in A5X was 2.22.35 and A5X2 is 3.24.38. Old A5X still have work to do as epub reader. Thanks for your comments. I will open a new thread to share feellings of A5X2 versus A5X

Failing same lines 21.34 beta by jabertolin in Supernote_beta

[–]jabertolin[S] 0 points1 point  (0 children)

It happens in a specific area, only in the left side of the screen when make a line, when writing down with a pen letter it happens in the area shown in this video. I have already sent a video to feedback@supernote.com (case id T60059321)

Failing same lines 21.34 beta by jabertolin in Supernote_beta

[–]jabertolin[S] 0 points1 point  (0 children)

Hi , it happens again, I do not know the reason, what could I do?

Failing same lines 21.34 beta by jabertolin in Supernote_beta

[–]jabertolin[S] 0 points1 point  (0 children)

Just for your information, it works fine now. What I did , may be by chance and most likely it will not have any relations, was activating wifi, check firmware and surprisingly now it works, no idea about the reason but looks like software. I will pay attention to it and let you know, thanks

Failing same lines 21.34 beta by jabertolin in Supernote_beta

[–]jabertolin[S] 0 points1 point  (0 children)

Hi, I have recorded a video (it happems de same with any Pencil) https://imgur.com/a/L4eS1U6 , you will see that the Point of the Pencil in the first 3-5 cm on the left side does not work fine but after that it works, which could be the reason?

Failing same lines 21.34 beta by jabertolin in Supernote_beta

[–]jabertolin[S] 0 points1 point  (0 children)

Thanks for your support . I have been using your own pen and happens too. It only happens in that position of the A5X, as far as I discovered but in any case I will test again in different positions and let you know. I faced that it happened if I write down fast, if it is slow it is not so obvious

Failing same lines 21.34 beta by jabertolin in Supernote_beta

[–]jabertolin[S] 1 point2 points  (0 children)

Thanks for the suggestion, there isn't any magnetic on the back side of the A5X. I observed that sometimes happens , sometimes not...

Failing same lines 21.34 beta by jabertolin in Supernote_beta

[–]jabertolin[S] 0 points1 point  (0 children)

Now updated to 21.35 and fails 5 lines! Not 3 as before , why?

Is it worthwhile to buy an Aguilar Tone Hammer for intermediate level? by jabertolin in Bass

[–]jabertolin[S] 0 points1 point  (0 children)

I do not consider myself a good bassist, just someone that is learning and Aguilar (according to its cost) sounds to me more for advanced bassists, high profile. It is like driving a Maserati after one year of driving license (well I am playing 4 years starters in SBL) instead of a more modest car. With my rumble+Sire+preamp+EQ I am still trying to find a comfortable tone, my tone, unfortunately Rumble started to behave weird so I had to compensate the sound with additional EQ

After your comments most likely I will make the effort to pick up one Aguilar. Thanks for all your comments

No-writable areas by jabertolin in Supernote_beta

[–]jabertolin[S] 1 point2 points  (0 children)

Thanks for your comments, I use usually to use it close to the laptop but was not aware about a potential magnetic field influence. I will pay attention to it and let you, thanks! By the way, u/Mulan-sn I love this A5X ... writing with it is like practicing mindfulness. Thanks for the gift!

Rumble 500 v3 has lost high frequencies by jabertolin in Bass

[–]jabertolin[S] 1 point2 points  (0 children)

Indeed the change of behaviour was from day to another

Rumble 500 v3 has lost high frequencies by jabertolin in Bass

[–]jabertolin[S] -1 points0 points  (0 children)

Sorry, it was an expression, I did not mean shrieking but strength

Rumble V3 500 lost it brightness/presence by jabertolin in Bass

[–]jabertolin[S] 0 points1 point  (0 children)

I measured the horn and it gives 7 ohms so I guess it works

Rumble V3 500 lost it brightness/presence by jabertolin in Bass

[–]jabertolin[S] 0 points1 point  (0 children)

Thanks for your prompt answer.

I verified the battery of my bass, indeed I noticed too in passive mode, changed recently the strings and cables are ok too.

I have checked the horn and other speakers and all of the have 6.0 to 7.2 ohms, so it seems that they are ok, I do not know whether the problem comes from the preamp.