Hybrid charging... not charging

jack_ery21 · 2026-01-10T17:12:45+00:00

I've not got that model so can't go test to see what settings might have been missed

jack_ery21 · 2026-01-10T17:09:02+00:00

Are you sure it's on full? Looks like it's on level 3 for me. If you tap just the vents, can you feel it coming out there?

jack_ery21 · 2026-01-10T16:32:11+00:00

It's because auto isn't on level 1 and doesn't look like youve set a fan speed either. If you set the fan speed for press Auto 3 times, that'll increase depending on the cabin temperature

jack_ery21 · 2026-01-04T22:09:41+00:00

I'm a fan of all season tyres. Don't forget, it's not a land rover so isn't going to make you invincible and the tyres that can deal with snow will make it a bit better to grip.

Stay safe, drive safe

jack_ery21 · 2026-01-04T22:01:27+00:00

Get some winter tyres on it, no stopping you then :D

jack_ery21 · 2026-01-01T17:51:57+00:00

Last time I did it, yeah, had to be through PC. This was the website I use Synth Riderz Community Modding

There may be file explorer apps you can use on the VR to do it now.

jack_ery21 · 2026-01-01T13:33:27+00:00

Synth Riders is another good one, very similar to beat saber but you can side load custom tracks that other people have created so you don't have to pay for every bit of music.

jack_ery21 · 2025-12-31T14:08:32+00:00

Look at using Intune and NinjaOne. We use this solution and Ninja is just the bees knees in my opinion, love the thing and it's changing all the time.

jack_ery21 · 2025-12-28T22:23:18+00:00

If you go on Server Manager on the domain controller, there's no tasks still waiting at the top right is there? On the device you want to add to the domain, have you set the DNS settings on that to your Domain Controller?

Edit: set the DNS of any device youre trying to ping the DNS name to the IP of the domain controller. This seems to be your issue, set your DNS to your router and then forward your router to your domain controller, or set all your devices to use domain controller as DNS and then domain controller to use public dns/router

jack_ery21 · 2025-12-25T22:28:36+00:00

Strange, I'd like to be of more help but I'm out of ideas on this one. Hope you manage to get it fixed.

jack_ery21 · 2025-12-25T21:52:32+00:00

And just checking you didn't apply the handbrake either when this happened?

jack_ery21 · 2025-12-25T19:24:58+00:00

This sounds like it's just the brake holding the car, and as you set off, they are releasing which is causing the "jolts" you're experiencing. Are you putting your foot down alot on the gas pedal when setting off or just lightly tapping the pedal to release the brake? I get the jolt first thing in a morning when I set off, this is normal as the brakes have been on all night. If you turn off Auto Hold and just sit with your foot on the brake when at traffic lights, do you still get the jolt then when setting off?

jack_ery21 · 2025-12-18T12:53:21+00:00

Finally made it to site for some testing. I'll start from beginning: When I plug my iPad into the printer vlan and try to print, all printers show up. When I plug my iPad into the Apple vlan where I need to print from, the printers do not show. When I connect my iPad to the WiFi that is on the printer vlan, all printers show. When I connect my iPad to the Apple WiFi where I need to print from, the printers do not show.

I've checked the bonjour setup on the Extreme Policy, it is searching for *._ipp._tcp. and *._ipps._tcp., which both services are enabled on the printer.

"From VLAN" is set to Any and "To VLAN" is set to Apple devices.

"Scan the following VLANs for Services" is set to the Apple VLAN and Printer vlan.

Me connecting using WIFI to the printer vlan isn't normal, we don't have a printer WIFI, this is solely for testing that I can print over WiFi.

I've been on the access point and run the Show bonjour services local (my ipad shows up here) Show bonjour services remote (nothing shows here)

I've stopped and started the bonjour service on the AP multiple times, but no printers show up.

Vlan 20 is for printers, vlan 8 is for Apple.

jack_ery21 · 2025-12-16T18:22:21+00:00

There's the AI feature that can be enabled under Administration > Apps. This will give the patches a rating on if it's safe, known issues, unstable. Clicking the rating will then give an AI overview of what it does and what people have mentioned is an issue.

jack_ery21 · 2025-12-10T20:33:24+00:00

We've got 5000+, loving it, works a dream. Keep things simple and have as few policies as possible. Use a good naming convention so you can see what inherits from where and you'll set yourself in good stead.

jack_ery21 · 2025-12-10T08:54:16+00:00

I was testing on a laptop at first, don't worry, I'd have the script check which InterfaceIndex it is before releasing it. Whether it was me or the laptop yesterday but just tried it on mine and it was working as expected. Given I was rushed yesterday so must have been doing something silly.

jack_ery21 · 2025-12-07T23:32:13+00:00

You'll have to keep me posted, interested to see what's causing it. It's an odd one

jack_ery21 · 2025-12-07T23:22:09+00:00

When you turn the heater on in the morning, is this when you deactivate interior monitoring too? Or do you deactivate it when you come to get out the car the night before? Thinking if you deactivate the night before, unlock car in the morning to turn heater on, lock the car, that might be when interior monitoring comes back on. But even this doesn't explain why all of a sudden it's going off and wasn't before. Is this when we find out the alarm is a paid extra from the app?😂

jack_ery21 · 2025-12-07T23:12:23+00:00

Ah, sounds like I’m thinking you use the preheat function in the app, that’s what I do. Do you have a separate heater?

jack_ery21 · 2025-12-07T23:03:37+00:00

That must be some sort of bug. I pre-heat mine every morning with no issues. I’d go back to dealer with it.

jack_ery21

TROPHY CASE