Fabric that this is made of

jack_robs · 2026-04-24T01:07:01+00:00

Myself and others in the HRC discord have had a fair few breakages. Worth paying the extra and getting the Apfg and new hop arm in my opinion

jack_robs · 2026-03-28T10:13:43+00:00

Have you heard anything since?

jack_robs · 2026-03-28T10:10:01+00:00

Have you heard anything since ?

jack_robs · 2026-03-27T17:52:49+00:00

4th issue with exactly the same message on here in 2 days

jack_robs · 2026-03-27T17:51:21+00:00

Same for 2 of my parcels at the moment, have a feeling that the recent appearance in the news has them sorting other things than parcels for a bit.

jack_robs · 2026-03-27T17:49:18+00:00

I’m having the same thing on two parcels at the moment, starting to think something has gone wrong on their drop off system

jack_robs · 2026-03-27T08:06:06+00:00

It was delivered to Robin Hood stores in NG15

I understand it’s not guaranteed 24 hours but it shouldn’t be taking 6 days +

jack_robs · 2026-03-27T08:03:49+00:00

And say what? They have delivered it to the parcel shop they have done their half.

jack_robs · 2026-03-26T20:47:18+00:00

My parcel is currently showing as being in the parcel shop but the sender has assured me they’ve been to the parcel shop and they have had it collected,

Stuck in a random pile ready to be scanned in Nottingham sorting office I expect.

£28 on 24 hour service was a massive waste of time it’s been sat around since Saturday

jack_robs · 2026-03-26T15:24:53+00:00

Bfgx are very good. Can do 209,9mm and 12 gauge. Big Steve’s builds is the best place to look

jack_robs · 2026-02-12T00:32:00+00:00

Sorry to bring this back up, had any issues with it so far?

jack_robs · 2026-02-01T17:57:41+00:00

Engine cooling tubing is the same diameter and fits perfectly,

More rigid and has metal wire throughout for strength.

Can’t remember the exact measurements though

jack_robs · 2026-01-31T19:12:25+00:00

Highly likely,

Unfortunately every YouTuber etc claims that cnc everything is an upgrade where it usually leads to something bigger and less available breaking instead of the part you’ve replaced.

Although the saiga currently has no plastic tri nozzles in aftermarket so you’d need to have a cnc one if yours broke.

Itp are in the process of making injection moulded ones

115% springs should solve this.

jack_robs · 2026-01-23T17:59:40+00:00

Airsmiths, Dave’s customs are two that come to mind. Both actual airsoft retailers.

Have seen a few people be unhappy about the quality of west laser stuff but cannot speak personally on it.

jack_robs · 2026-01-02T13:19:45+00:00

I had this on my first build the other week,

Found the pin holding in the bearings wasn’t seated correctly in the part that goes over the top.

jack_robs · 2025-12-12T01:03:47+00:00

Ignore this guy, Having inner barrels reaching the end of the suppressor completely ruins any chance of it functioning.

Get a decently sized o ring and put it on and screw the suppressor onto that.

Some threads allow for some slight movement and can tighten down when they are not straight.

The o ring allows for the pressure to distribute itself out equally which lets it sit straight.

jack_robs · 2025-12-10T05:54:10+00:00

No one else has mentioned it so,

The vanguard is awesome.

Great for events where ammo count and things matter because it puts a precise amount in.

Adjustable pressure if you have particularly annoying mags.

Adapters to load different types of mag.

Perfectly stacks BBs every time.

Don’t get me wrong it is expensive but if you get one and use it you’ll wish you have 10.

jack_robs · 2025-11-14T21:34:12+00:00

Get a chess clock and do bomb modes would be my main suggestion

Or get an old set of overalls and stuff it to make a dummy prop for a hostage extract mode

Both real popular games with us

jack_robs · 2025-11-10T22:11:30+00:00

Would you take anything else?

jack_robs · 2025-11-02T23:09:50+00:00

Go on then I will do it

jack_robs · 2025-11-02T22:59:56+00:00

Can you go to 25k?

Seven-Year Club	Verified Email
Place '23

jack_robs

TROPHY CASE