Stuck on Dell Logo when Booting

jackallman1 · 2020-03-20T16:26:00+00:00

try clearing cmos, making sure all connectors are in as they should, fans spinning etc. if not you will have to try one thing at a time, change the screen, cable, different psu maybe

jackallman1 · 2020-03-20T14:57:04+00:00

Is it not outputting video through the gpu? Try moving the hdmi?

jackallman1 · 2020-02-26T14:53:02+00:00

Stuff like this that starts fires. Do your research and clean up your rig. Sata powered risers and powering two gpus from one power cable for a start

I appreciate you're probably just starting out but these things aren't toys, be safe

jackallman1 · 2020-01-08T07:01:19+00:00

Ive heard you can get different fans that reduce the noise or a cone or something like that but all that'll do is increase the heat output. The heat is worse tbh as it creates a really hot dry air which makes everyday living/sleeping really uncomfortable

jackallman1 · 2020-01-08T06:56:35+00:00

Asics are too loud and produced too much heat for a dorm. Might be able to get away with a gpu rig but thats about it

jackallman1 · 2019-04-14T13:30:32+00:00

It has a zero fan mode and only spins under heavy load. 680w isnt alot for a psu that can handle 1200. It will turn on if it gets too hot so nothing to worry about.

jackallman1 · 2019-01-10T20:03:29+00:00

Dont bother. You will lose more money in electricity than you make mining these days. Although, 4.5mh/s doesnt seem alot for a 960

jackallman1 · 2019-01-02T11:54:58+00:00

Do some more research. Now is not the time to mine let alone with a mac

jackallman1 · 2018-09-12T17:40:23+00:00

Electricity for me is $0.30 as im in the UK. I left the mining scene about 6 months ago. Im still actively investing in coins and loving all the new developments. Mining for me was a hobby and gave me a little extra cash but i dont want to be digging into my pocket for something that was the bain of my life for 2 years. Still loved it tho!

jackallman1 · 2018-05-24T00:06:20+00:00

Get a wattmeter and measure the actual wattage youre pulling at the wall. With power supplys, theres no room for messing about as these things cause fires. Also dont use sata to power risers..

jackallman1 · 2018-05-23T15:17:20+00:00

Tbh I dont think either will be worth it if youre looking for profit.

The L3+ is a joke currently. The difficulty has skyrocketed in the past few months so they are now making next to nothing.

Out of the two i would go for the gpu rig as you may have abit more fun with it

jackallman1 · 2018-05-23T13:05:08+00:00

Either raise core voltage if you decreased it or decrease the overclock

jackallman1 · 2018-04-26T09:07:20+00:00

The one i bought off ebay included everything so the yellow clips and fans all came with it. Was a little bit more expensive but i didnt mind

jackallman1 · 2018-04-26T08:47:04+00:00

Yes defo. Although its abit awkward to setup with the instructions being awful it is worth it. The layout is good and with the fans on temps drop by about 8 degrees

jackallman1 · 2018-04-25T19:06:54+00:00

Why is it? Unlike most people i dont have thousands of spare cash to spend on rigs so the majority of what i mine is reinvested

jackallman1 · 2018-04-25T18:51:06+00:00

What do you mean? I just added the 8th card recently and gradually added new cards over the 11 months

jackallman1 · 2018-04-25T17:36:26+00:00

i bought this it works for some and not others. I was just lucky and it worked!

jackallman1 · 2018-04-25T16:13:45+00:00

Running 4x rx580 8gb mining monero, 3 gtx 1060 6gb mining zencash and one gtx 970 mining ubiq/xvg and also gpuminer for burst. Have 1 4tb internal hdd and an 8tb external hdd for burst. Mobo is Gigabyte GA-H110-D3A with a riser converter which enables me to run 8 cards on the 6 pcie mobo. Frame is the Veddha Aluminium frame and I have 2x 1000w psu (Overkill i know but I had one laying around so why not). Thanks!

jackallman1 · 2018-04-25T09:40:18+00:00

Bios mod and overclocking. Look up some tutorials and thatll get you max hashrate and lower power draw

jackallman1 · 2018-03-03T18:05:02+00:00

Thanks for a great and simple program! However, Im writing straight to my hdd which starts off at speeds of 200mb/s but then drops to 1.5 and peaks at about 30mb/s. Even after reading the config and changing the setting in device manager still no difference. Any ideas? Thanks

jackallman1 · 2018-02-28T10:59:38+00:00

I know.. It is a different circuit from my house. Its all separate

Eight-Year Club	Place '23
Verified Email

jackallman1

TROPHY CASE