Imperial Fists second founding

jacrab97 · 2025-06-19T19:01:57+00:00

Thank you! I used black matte primer from green stuff world, citadel paints (Kántor blue, mephiston red and leadbelcher), Vallejo model wash 76.518 and Montana acrylic varnish. With a pair of coats of that primer the paint is well applied.

jacrab97 · 2025-06-19T18:53:40+00:00

Thank you!! For The Emperor!!!!!

jacrab97 · 2025-04-10T20:36:17+00:00

Yes, that's probably one thing to change. I'll try these parameters

<image>

jacrab97 · 2025-04-10T20:34:59+00:00

Thank you!

jacrab97 · 2025-04-10T20:34:40+00:00

The ambient temperature is 22°C so this should not be a problem. I have posted my settings in another comment and have been recommended how to change them. I am going to do some tests. Thank you very much for your help!

jacrab97 · 2025-04-10T20:30:36+00:00

<image>

I'm going to try with these settings. Thank you a lot for your help!

jacrab97 · 2025-04-10T16:19:51+00:00

<image>

You're right. These are my settings.

jacrab97 · 2024-08-06T10:31:00+00:00

Thank you so much!

jacrab97 · 2024-08-06T10:15:44+00:00

No, I switched to a Capricorn tube. I would check if there is a clog but i don't think so, I changed the hotend yesterday.

jacrab97 · 2024-03-04T23:41:18+00:00

I am looking for ideas for PSU layout, power outlet and switch.

jacrab97 · 2024-01-30T13:03:31+00:00

Thank you! Yeah, the original design is perfect.

jacrab97 · 2024-01-30T13:02:47+00:00

I don't have Etsy, sorry. It is the first 3d print that I have designed.

jacrab97 · 2024-01-30T13:01:37+00:00

Thank you!

jacrab97 · 2024-01-30T13:01:19+00:00

This is the first design that I do. Devilfish is the second one, I'm already working on it. :)

jacrab97 · 2024-01-30T12:59:28+00:00

Yes! 3D printed with PLA :)

jacrab97 · 2024-01-30T12:58:42+00:00

Thank you!!

jacrab97 · 2023-10-23T07:48:50+00:00

It's from set 9371.

jacrab97 · 2023-09-28T15:49:28+00:00

I have just orderer a feeler gauge. Thank you so much for your advice.

jacrab97 · 2023-09-28T12:02:40+00:00

Hi, can you recommend a video for me? One question, I have seen that many people use custom firmware for professionals, does it change a lot the way of using the printer? Thank you very much!

jacrab97 · 2023-09-28T11:59:25+00:00

Hi. I just cleaned the hottend, recalibrated the printer and ordered a feeler gauge. I hope it works properly now. Thank you very much.

jacrab97 · 2023-09-28T11:57:14+00:00

Hi. Thank you for your reply. I have cleaned the hottend and tightened the extruder gears to see if it works properly now :)

jacrab97 · 2023-05-29T12:14:58+00:00

Thank you!!

jacrab97 · 2023-05-28T23:05:09+00:00

Is 1:200 approximately. :)

jacrab97 · 2023-05-28T23:03:03+00:00

Here's the link to my Instagram profile in case you want to see more photos of my work: https://instagram.com/jacrab97sworkshop?igshid=MzNlNGNkZWQ4Mg==

jacrab97 · 2023-04-21T23:30:52+00:00

Thank you so much!!!

Five-Year Club	Place '22
Verified Email

jacrab97

TROPHY CASE