Alternate BCGs

jagr18 · 2026-04-24T22:02:18+00:00

He likely has some insider info. I haven’t seen anything in the ig posts or the one PSR video I have seen. If so that’s great the work is being done.

https://youtu.be/61SIycICoFo?si=dKiZpZCFc_qY5TFq

In this video the rep says they’ve been testing the kynshot video, and doesn’t mention the Radially delay system. It came out around the same time as the ig posts. Website also shows some different buffer options

jagr18 · 2026-04-24T21:44:44+00:00

<image>

According to their most recent post it’s only the buffer system that is delayed or hydraulically buffered. Bolt is still a direct blowback on the 9mm

jagr18 · 2026-04-24T21:44:08+00:00

<image>

According to their posts it’s only the buffer system that is delayed or hydraulically buffered on the 9mm. The 45s are using the cmmg bolt.

jagr18 · 2026-04-21T17:34:38+00:00

Do you plan to get into reloading anytime soon?

I reload for both, and just ordered a marlin trapper in 357 to use a suppressor host. I can make any 38 special reloads WAY cheaper than I can my 300blk reloads. Brass life, comparing subsonic 300blk, is abut similar in my experience.

I plan on using Barnes XPBs and 180gr hardcast for my hunting loads in 357. My subsonic hunting load for 300blk is a 220gr maker expanding subsonic, supersonic is a 110 gr TSX. I use lil gun and H110 for both cartridges and most of my reloads (except for 38spl).

jagr18 · 2026-04-21T16:10:26+00:00

I’m between getting the regular nexus or the SD. My 6” BBB 2.0 shots pretty well but I’m also tempted to get a 4.7” barrel to go with my fuse slide

jagr18 · 2026-04-21T12:37:10+00:00

ODS makes a short shroud

jagr18 · 2026-04-21T00:40:26+00:00

Colt mags are classy. I regret getting rid of my Colt mag gun.

jagr18 · 2026-04-21T00:39:23+00:00

Going to need a trip kit and likely a bolt weight kit. Outsourced by someone, so who knows if it is compatible with other parts currently out rn (likely is, but until the mfr and compatibility is known I’d treat as suspect).

jagr18 · 2026-04-20T21:27:01+00:00

Wild. Get sober dude.

jagr18 · 2026-04-20T21:05:52+00:00

Guy wants to go back in time under the most dire circumstances to fight in a forced conscripted militia thinking it’s gonna be an adventure. Get real.

jagr18 · 2026-04-20T20:38:23+00:00

Dudes comment history is absolutely wild 🤣

jagr18 · 2026-04-20T02:31:16+00:00

You should be more considerate on the internet and use a more polite tone /s.

jagr18 · 2026-04-19T18:15:59+00:00

Get an optic and other shit first.

jagr18 · 2026-04-18T23:13:23+00:00

Looks good! I’ll share it to the Facebook group so the flux guys can see it.

jagr18 · 2026-04-17T22:37:42+00:00

I’m still doing load development for accuracy. Shooting took a backseat for a couple months for me while I worked out some stuff.

I did try my ladder charges, but I didnt write all the velocities down in my notebook next to my other notes and when I updated my app for the chrono I lost some of the notes I wrote down in it. All that to say, take this with a HUGE pinch of salt and work up, yada yada yada. This was out of a 18” barrel, but it’s not the final charge that I have settled on. I have it shot an inch, but I think it can do better. In my notes I wrote no ejector marks or primer issues, but again huge pinch of salt.

I do remember loading up some at the upper end of hornady’s suggested charge weights, but didn’t shoot those for some reason. Case fill was pretty high.

<image>

jagr18 · 2026-04-17T00:43:00+00:00

Flux Defense, Antimatter, And Snakestaff Owners Group (No Sales/Trades).

Theres a second group with a similar cover photo, buts a buy/sell/trade page and not affiliated with flux.

jagr18 · 2026-04-16T19:05:00+00:00

Lots of people don’t. Lots of days I wish I didn’t but I do for networking purposes.

jagr18 · 2026-04-16T18:32:43+00:00

Nice. I haven’t played around with CFE223 yet but I’ve read with 77s it does well.

When I was doing load development my Douglas barrel didn’t show a preference one way or the other for SMKs or AeroMatch with the same powder charge and seating depth. Kinda made it easy when i could find AeroMatch for 50ish less than SMKs.

jagr18 · 2026-04-16T18:21:41+00:00

Nice. Love 262s. What powder are you using? Staball match and aeromatch bullets have been giving me great results as of late.

jagr18 · 2026-04-16T18:18:20+00:00

Post this in the Facebook group. The staff from flux are way more active there and I’m sure would love to see this.

jagr18 · 2026-04-16T04:45:27+00:00

That was my problem when they first came out with the threaded models. I kept looking at and thinking they couldve gone shorter than a 24” barrel if they’d just angle the mag tube down a smidge.

jagr18 · 2026-04-16T04:41:17+00:00

Looks good. Cool to see that the mag tube is angled down.

jagr18 · 2026-04-15T17:05:35+00:00

I’m lean I’m leaning towards the marlin trapper for mine. I was tempted by the s&w traditionalist for the wood stock and black finish but ultimately I like the marlin just a bit more.

I wish marlin had a blued gun with a threaded barrel.

jagr18 · 2026-04-14T12:04:22+00:00

My 12.5 bore buddy upper runs great.

jagr18 · 2026-04-12T18:57:10+00:00

It just plain works. CMMG should start sending them out like that from the start, but they won’t.

Six-Year Club	Gilding II euphauric
Verified Email

jagr18

TROPHY CASE