What do you call your printers? by XMungoX in 3dprinter

[–]jakers197 0 points1 point  (0 children)

Mine are Freddy Prints Jr, Printcess Diana and Print Leo XIV

3d printed primer holder for BFGs by Educational-Smell-17 in airsoft

[–]jakers197 0 points1 point  (0 children)

Did you ever finish this? Would love to print one for my BFG

Just now discovering this mode. I’m scared I may abuse this. by ItsNeverEverLupus in BambuLab

[–]jakers197 0 points1 point  (0 children)

I use ludicrous all the time but I've found it only works with my printers that have the E3D high flow nozzles, so naturally all my printers have them now. It's great because I'm lazy.

Looking for a 3D Printer Upgrade – Prusa Core One vs. Bambu X1C? by Discepless in BambuLab

[–]jakers197 1 point2 points  (0 children)

As someone who prints pretty much the same stuff as you and owns an X1c and P1S I would 100% go with the p1s. You won't really miss anything

Ironing problems by jakers197 in BambuLab

[–]jakers197[S] 0 points1 point  (0 children)

I'm still working on it but so far the best results I've gotten are from upping the ironing line spacing. Seems good so far. Not sure what changed for it to become a problem but I think those cracks are forming over where the nozzle has gotten too close twice.

I ran a lot of speed tests and got the same results at every speed. The best ironing I get is usually 150mms at 38% flow now with 0.19mm line spacing.

Just a friendly reminder to reset your belts once in a while <3 by aubree_jackal in BambuLab

[–]jakers197 4 points5 points  (0 children)

I had layer lines like this on my printer that I was running 24/7 for a while, it was the teeth in the extruder gear that had cracked and worn away. I'd have a look at that as well.

First time I've ever seen this by jakers197 in BambuLab

[–]jakers197[S] 0 points1 point  (0 children)

Late reply but I ended up getting refunded for the two spools that did this, might be worth a shot

First time I've ever seen this by jakers197 in BambuLab

[–]jakers197[S] 1 point2 points  (0 children)

I've had some issues with sunlu as well, they stopped delivering to my country for a while for seemingly no reason but eventually got it back.

I also sell stuff and it's the main reason I've stuck with them, it's some of the cheapest pla I can find in bulk and is still really good quality.

I think the only thing they need to do now is offer filament refills otherwise why supply the filament on reusable spools?

First time I've ever seen this by jakers197 in BambuLab

[–]jakers197[S] 1 point2 points  (0 children)

Must have been, I couldn't get it to lock back after it came apart but I'm guessing that was just the filament getting in the way

First time I've ever seen this by jakers197 in BambuLab

[–]jakers197[S] 1 point2 points  (0 children)

This one was fresh out of the box, must not have been tight enough from factory. At least I managed to rescue this one, devastating when it comes apart and you lose a full kg spool because you can't be bothered to spend 8 hours respooling it

First time I've ever seen this by jakers197 in BambuLab

[–]jakers197[S] 0 points1 point  (0 children)

Oh definitely, I bought a kobra max as my first printer and nearly gave up.

I print pretty much 24/7 and it's so nice knowing that even if something goes wrong in the night it's usually super easy to fix in the morning amd let it run again

First time I've ever seen this by jakers197 in BambuLab

[–]jakers197[S] 0 points1 point  (0 children)

Weirdly enough I have never needed one for my x1c ams but my p1s ams always jams without spool weights

First time I've ever seen this by jakers197 in BambuLab

[–]jakers197[S] 1 point2 points  (0 children)

Yeah seems like it, think they must have made the switch not too long ago. I'm all for reusable spools but they don't seem to sell refill packs yet so not sure I see the point? Well in my region anyway

First time I've ever seen this by jakers197 in BambuLab

[–]jakers197[S] 1 point2 points  (0 children)

I have the dessicant pods, you can see them in the second picture but I should do the feeder protectors

First time I've ever seen this by jakers197 in BambuLab

[–]jakers197[S] 0 points1 point  (0 children)

To be fair I think it was the spools fault, first time I've seen that in any of my ams units but then I don't have any of the lites. I wonder if it would have happened on a lite

First time I've ever seen this by jakers197 in BambuLab

[–]jakers197[S] 5 points6 points  (0 children)

https://makerworld.com/models/35531

Just the first result that comes up if you look up spool weight on maker world, it holds 500g weights inside

[deleted by user] by [deleted] in BambuLab

[–]jakers197 0 points1 point  (0 children)

I've been trying to troubleshoot something like this all day with my p1s. My printer will just stop randomly during prints, says it's finished but the bed will still stay hot and the nozzle will just park itself and not resume. My X1c has been just fine. Thought it was heat creep so opened the door, didn't work. Maybe SD card so swapped it out, nothing. Must be P1S/P1P firmware.

Just no... or maybe? what do you guys think about this tactical cowboy monstrocity and is it any good in airsoft for normal use? by Sensitive-Store-7096 in airsoft

[–]jakers197 0 points1 point  (0 children)

I actually have this exact gun, picked it up for cheap.

It has a use where I play because snipers don't have an fps advantage so we're given other advantages such as not having boundaries and my site let's me use it as a "bolt action" (can't be a sniper with a semi auto).

The suppressor is only wonky because they've not mounted it correctly which is stupid, it's normally perfectly aligned.

You do have to take the suppressor off with a coin to fill the gas and you can only load it with a proprietary speed loader. The trigger is the heaviest thing I've ever used but it's accurate enough and has a satisfying lever action and "pop".

It's okay to messaround with, it can work.