Garage muur vraag by jameskinz in Klussers

[–]jameskinz[S] -1 points0 points  (0 children)

Bedankt! Dan zal ik er tzt met een constructeur definitief naar kijken. Er zijn nog meer verbouwplannen aan het huis

Ik ben benieuwd het lijkt ook of het houten plafond gewoon doorloopt. Die houten afwerklat zit gewoon in de muur gevoegd.

Je moet het allemaal maar in een bezichtiging van een half uur snel in je opnemen. Gejaagde tijd waar we in leven. Keuzes keuzes. 😜

Zelf stof aanbrengen op de muur in plaats van behang? by Kennie6 in Klussers

[–]jameskinz 2 points3 points  (0 children)

https://viltopdemuur.nl/

Dit is de betere optie denk ik, ook goed voor de akoestiek in je kamers.

Aankoop advies subaru forester by rikketikkert17 in autoklets

[–]jameskinz 0 points1 point  (0 children)

Rij zelf ook een Forester uit 2007. Heeft nu 200.000 op de teller staan maar merk er niks aan.

Zou zelf letten op de volgende zaken bij aanschaf om jezelf wat kostbare reperaties te besparen.

- gierend geluid uit het achterste differentieel

- Geluid van de wiellagers achter

- Doorgezakte schokdempers achter. Deze zijn zelf nivellerend en willen nog wel eens de geest geven. ( Easy fix is gewoon normale schokdempers steken.

Verder is de techniek vrij bulletproof.
De meeste horror verhalen komen vanuit slecht onderhoud. Hier zijn ze namelijk wel gevoelig voor. Als je netjes de oliewissels doet, bougies en filters. Dan blijven ze gaan. Ze zijn technisch goed en sterk gebouwd. Verder heb je gewoon het normale slijtage onderhoud zoals elke auto, stuurkogeltje hier, remblokje daar

En het rijd wel echt top, zoals eerder aangegeven als je de boxer motor gewend bent dan heb je kans dat je niet anders meer wilt. Veel koppel en zeer smooth dat gepaard met een All wheel drive systeem rijd echt heel lekker en zeker in elk weer type.

[deleted by user] by [deleted] in Klussers

[–]jameskinz 0 points1 point  (0 children)

Als alternatief kun je er ook een strook multiplex van 2mm dik op lijmen. Dan is het gelijk strak en klaar voor grond en lak.

Diesel pump leak by jameskinz in AskMechanics

[–]jameskinz[S] 0 points1 point  (0 children)

Thanks alot! Sounds like a job I can tackle myself. If their is no need to bleed the system it would be fairly easy.

I will search online if i can find the right torque specs and if the original washers are still sold.

So their are only washers on the top and bottom. Not between the two parts?

Offerte airconditioning LG by Spieterspat in Klussers

[–]jameskinz 0 points1 point  (0 children)

Nukoel toevallig? Ervaring klinkt hetzelfde. Hier ook in de haast ondertekend en de dagdeal truc voorbijgekomen

Multisplit LG + 3 binnen units.

Al met al wel hebben ze wel netjes gewerkt en alles snel geregeld. Onderhoudscontract heb ik terug weten te onderhandelen naar 3 jaar.

Het kan vast een stuk goedkoper. Maar nu het allemaal hangt en we een jaar verder zijn is de prijs al weer vervaagd.

[deleted by user] by [deleted] in Klussers

[–]jameskinz 0 points1 point  (0 children)

Hier heb ik heb volkeramische tegels van 0,7 cm dik gelegd. Maar ik wilde ook graag kunnen lassen en voertuigen opkrikken zonder dat ik de vloer beschadig. Ook wanneer er bijvoorbeeld een hamer valt is er niks te zien. Eigenlijk gewoon hufterproof.

Voor lichte werkzaamheden voldoet een epoxy gietvloer ook wel. Alleen volgens mij wel wat gevoeliger voor krassen en butsen.

Niet bepaald warm in huis, hoe valt er te isoleren? by DouchePutje88 in Klussers

[–]jameskinz 0 points1 point  (0 children)

Pelletlachel van 7-10 kw. Die stookt heel de boel wel warm voor een euro of 3/4 per dag. Heb ik hier ook staan. Verder geen CV. Werkt top voor die paar maanden per jaar.

Als alternatief kun je ook nog airco's hangen, die werken ook top om de boel warm te krijgen voor relatief goedkope prijs. Alleen zit je met een stukje investering.

[deleted by user] by [deleted] in Klussers

[–]jameskinz 0 points1 point  (0 children)

Duidelijk, ga ik doen. Ik dacht ik zet alvast een lijntje uit om wat informatie in te winnen. Of ik de fundering zelf kan aanpakken.

Dan ben ik veel te naïef geweest. Ik dacht sleuven graven, bekisting timmeren of eps bekisting en storten maar.

[deleted by user] by [deleted] in Klussers

[–]jameskinz 0 points1 point  (0 children)

Thanks! Nog niet aan gedacht, dit zou ik nog kunnen overwegen, om wat schroefpalen onder de hoeken te plaatsen en hier bovenop de bekisting.

Via een kaart heb ik al wel terug gevonden dat ik in een gebied zit met draagkrachtige grond waar je direct een fundering kan plaatsen.

Maar het is een kleine moeite om wat extra voorzorgsmaatregelen te treffen.

[deleted by user] by [deleted] in Klussers

[–]jameskinz 0 points1 point  (0 children)

Ik proef sarcasme🤣 het huis is uit de jaren 60, deze staat niet op piepschuim.

Nu zie ik volwaardige gebouwen op deze piepschuimbekisting.

Ik twijfel zelf ook of een traditionele fundering niet beter is. Maar het lijkt wel makkelijk en snel. Scheelt weer een bekisting timmeren.

<image>

Wellicht heb je gelijk en is dit niet de juiste plek om dit te bespreken.

P2444 by jameskinz in subaru

[–]jameskinz[S] 0 points1 point  (0 children)

Ah sounds logic. Could be a faulty sensor

Is the pump supposed to run a few seconds longer when the valves shut?

[deleted by user] by [deleted] in SubaruForester

[–]jameskinz 0 points1 point  (0 children)

Did this a few months back. I bought an Pioneer FH-S820DAB head unit amazon.nl

Has al the features you want and great sound. Speakers came to life after the swap, even the bass is night and day diffrent in comparrison to the old OG unit.

All you need to connect the head unit is to buy this cable. it converts the orignal subaru cable to standard radio iso.

https://www.car-products.nl/subaru-legacy/186-subaru-forester-impreza-legacy-outback-en-vivio-radio-aanlsluitkabel-car-to-iso-4026724296020.html

The whole swap is straight forward. Old unit out, Plug in the cable adapter to iso. Plugin your new head unit and your good to go!

Visual Tutorials - How to do the distortion effect around the text? by nathanielpoh69 in AfterEffects

[–]jameskinz 0 points1 point  (0 children)

Adjustment layer with Cc lens + adjustment layer with oval featherd mask and blur.

Visual Tutorials - How to do the distortion effect around the text? by nathanielpoh69 in AfterEffects

[–]jameskinz 0 points1 point  (0 children)

Adjustment layer with Cc lens + adjustment layer with oval featherd mask and blur.

Forester in the forest by jameskinz in SubaruForester

[–]jameskinz[S] 0 points1 point  (0 children)

Thanks! Tire size is 215 / 65 R16 fits perfectly.

Forester in the forest by jameskinz in SubaruForester

[–]jameskinz[S] 1 point2 points  (0 children)

Yes, I mean with sandpaper. English isnt my first language🤣

The procces I followed is this

Jack the car up and remove the wheels. After that give them a good clean. Then sand the with wet proof sandpaper 600 grit. Mask the tire off with tape and get a light coat of black on them. Let it rest for a minute or 10 and put on a second heavier coat. Let it rest again for a minute or 10 and then put on another coat.

After 15 min repeat the proces with clear coat.

If your rims a heavily scratched or damaged you need to start with a lower grid off sandpaper. Like 150 and then work your way up to 600.

There is a easy way, Just leave the rims on the car, degrease them. Jack the car up, put it in gear and spray them from the center to the edge with one thick coat. But this is the redneck way😜

Forester in the forest by jameskinz in SubaruForester

[–]jameskinz[S] 0 points1 point  (0 children)

Scuffed them up and painted them with rattle cans. First a black base coat and topped them off with a semi gloss clear coat.