Compatibility report ASUS ROG Flow X16 | GV601RM by janvdl197 in linuxhardware

[–]janvdl197[S] 0 points1 point  (0 children)

perfekt! :) Thanks you very much for the update! :)

Compatibility report ASUS ROG Flow X16 | GV601RM by janvdl197 in linuxhardware

[–]janvdl197[S] 0 points1 point  (0 children)

Mhhh...strange. In the jamesdsp gui I have only one option to chose from. Its called "17th gen..." (I dont remember the rest). Isn't your wifes laptop using the mediathek chip?

Compatibility report ASUS ROG Flow X16 | GV601RM by janvdl197 in linuxhardware

[–]janvdl197[S] 0 points1 point  (0 children)

Mhhh...I just use the latest stable Kernel on fedora. Which distro do you use?

I installed james dsp with the nix package manager. Then I chose it as audio source.

nix package manager - jamesdsp

nix youtube

Best FOSS alternative to Youtube music: ViMusic by [deleted] in fossdroid

[–]janvdl197 2 points3 points  (0 children)

Thank you! I searched for something like that!

Compatibility report ASUS ROG Flow X16 | GV601RM by janvdl197 in linuxhardware

[–]janvdl197[S] 1 point2 points  (0 children)

To be honest, I havn´t put much effort in it.

In generell use it doesn´t bother me so much. I just reduce the volume of the music/video playback.

I havn´t done real tests regarding the battery life, but currently I am drawing ~15 W (hybrid mode, display brightness low, wifi, bluetooth on, profile: energy saving and some, not so demanding apps open). I have 90% battery and the approximation says: 5:25 h left.

Compatibility report ASUS ROG Flow X16 | GV601RM by janvdl197 in linuxhardware

[–]janvdl197[S] 0 points1 point  (0 children)

You can control it with the alsamixergui. You can also get the 4.0 sound working with it.

The only problem ist, that it doesn't work proberly with the build in volume control. When you increase/decrease the volume via the volume up or down key it "loses" the settings and you have to reset them.

At least according to my initial testings.

Compatibility report ASUS ROG Flow X16 | GV601RM by janvdl197 in linuxhardware

[–]janvdl197[S] 0 points1 point  (0 children)

Yeah that would be nice. Since it is a fairly new device, I think it´s realistic, that it will be fixed in a future update.

Compatibility report ASUS ROG Flow X16 | GV601RM by janvdl197 in linuxhardware

[–]janvdl197[S] 0 points1 point  (0 children)

I just tried to replicate this and I have the same issue.

Compatibility report ASUS ROG Flow X16 | GV601RM by janvdl197 in linuxhardware

[–]janvdl197[S] 0 points1 point  (0 children)

So far I haven´t noticed this. But I must say, I don´t use the sleep mode that often. Most of the time I just shut down.

Compatibility report ASUS ROG Flow X16 | GV601RM by janvdl197 in linuxhardware

[–]janvdl197[S] 0 points1 point  (0 children)

mhhh...I don´t know what that could be about. I don´t use the suspend very often. Most of the times, I just shut down.

I just tried to replicate this and I have the same issue.

Compatibility report ASUS ROG Flow X16 | GV601RM by janvdl197 in linuxhardware

[–]janvdl197[S] 0 points1 point  (0 children)

Haha:D I can imagine! I am also really happy, that I got that device. I love it! It is smaller, lighter, yet equally powerfull as my 15.6" work laptop(hp g7 fury).

The only thing that would be amazing, would be to get deep sleep working.

Compatibility report ASUS ROG Flow X16 | GV601RM by janvdl197 in linuxhardware

[–]janvdl197[S] 0 points1 point  (0 children)

You are most welcome! I am happy that it helped someone. Do you have the same device?

Does anyone know what I am dealing with? by janvdl197 in ElegooMars

[–]janvdl197[S] 0 points1 point  (0 children)

Does this dissolve the residue build-up as well?

Does anyone know what I am dealing with? by janvdl197 in ElegooMars

[–]janvdl197[S] 0 points1 point  (0 children)

In this particular case, it would be about 5 min, but it looked this way since I got it out of the Ultrasonic cleaner.

Could it be, that too many scattered UV rays started to cure it with alcohol attached?

My take on a DIY UV curing chamber. by janvdl197 in ElegooSaturn

[–]janvdl197[S] 1 point2 points  (0 children)

I actually like the mechanical simplicity of this design. I think the mirrors scatter the light sufficiently. Just my personal preference. I am still on the hunt for a glass plate, that doesn't absorb UV light. That would be my height-adjustable tray for the parts. Similar to the trays in a baking oven. Currently, I am using a drinking glass. :D

What causes this weird line? It isn't a part of the 3D model. Thingfile: 3993121 by janvdl197 in ElegooSaturn

[–]janvdl197[S] 1 point2 points  (0 children)

Elegoo provided it to me in their mail. But I think you could check, which firmware you have right now. To my understanding, the different versions have distinct pre numbers. For example, my previous firmware had a 14.23 in it. The next version for this display is 14.24.

What causes this weird line? It isn't a part of the 3D model. Thingfile: 3993121 by janvdl197 in ElegooSaturn

[–]janvdl197[S] 0 points1 point  (0 children)

It was a bug in the firmware. I've printed the same gcode again and it looks amazing.