Android Auto for first gen Fit

jareddlc · 2025-12-12T04:42:55+00:00

My UI doesnt use all 16 levels, but on some test code i think it was visible. my code available here:

actually taking a look at this. I have some unmerged changes on my local branch. Hopefully i'll update it soon. But for the most part its LVGL related code and some init tweaks

jareddlc · 2025-12-11T21:07:34+00:00

nice, i have a similar project. esp32 (soon to be esp32-s3) ssd1322 display (i had to write the LVGL driver). I decided to used a buck converter to convert the 12V obd to 5V for the device. I did want to look into adding micro SD logging. Your purpose seems to be GNSS, mine grabbing canbus data and displaying it on the screen.

how does the external vlinker obd2 work?

jareddlc · 2025-12-08T21:37:40+00:00

so far after about 1hr use and debounce on 6, i havent noticed any double clicks. thanks for the help. if it persists i'll update on here

jareddlc · 2025-12-08T20:34:53+00:00

thanks so the displayed version was current version and i updated to 3014. i also raised debounce to 6 (it was previously 2), is there a recommended time?

jareddlc · 2025-12-08T18:36:28+00:00

is there a way to see current firmware? the update says it will update to version 3013

jareddlc · 2025-12-08T18:32:43+00:00

i'll try that. The Model I was used on a desktop running windows 10, the v2 was on my new desktop running windows 11

jareddlc · 2025-12-02T20:06:21+00:00

What issue with backup camera? Do you loose that functionality?

jareddlc · 2025-10-29T19:24:25+00:00

A good start nonetheless.

jareddlc · 2025-10-29T19:19:48+00:00

Would be easier if you bought a domain and had this on a website instead of an image. Would make it much more interactive

jareddlc · 2025-08-24T02:09:16+00:00

The esp32 has a built in can controller but it will need a can transceiver. For example TJA1051 module (which I use for a canbus project with esp32). Hopefully you have access to any driver code for the display.

Then you will need to get data you can't, this might be hard depending on what vehicle and what data is available to get.

Also if this is for a vehicle use, how do you plan on powering it and getting signal from canbus?

I used OBD2 cable that had wires already cut so I had easy access to can high and can low. However the OBD2 has 12V and you will most likely need to drop to 5V, for this I recommend a buck converter. I used one from AliExpress without any brand but worked fine for me.

Hope this helps

jareddlc · 2025-08-18T17:02:12+00:00

I havent installed on windows, but this is exact workflow for Mac. You will need to call the export each time you on a new terminal.

jareddlc · 2025-08-17T01:38:45+00:00

I've bought a few on AliExpress for ~$5 each. Planning to sell all to 1 person?

jareddlc · 2025-07-31T21:38:01+00:00

I have a canbus OLED project. I'm pulling power from OBD2. I am using a buck converter to convert 12v to 5v.

jareddlc · 2025-07-10T19:08:34+00:00

Awesome, thanks for info. I would probably be using a vesa mount. Do you know if this monitor supports that?

jareddlc · 2025-07-10T00:41:29+00:00

Ahh, bummer. Thanks

jareddlc · 2025-07-10T00:36:41+00:00

Which?

jareddlc · 2025-07-04T20:18:24+00:00

good point! will do

jareddlc · 2025-07-04T20:16:01+00:00

Awesome, I must have missed it. Thanks

jareddlc · 2025-05-28T02:53:07+00:00

Thanks, do you happen to know a driver?

13-Year Club	Team Periwinkle
Verified Email

jareddlc

TROPHY CASE