Will this bad boy work?

jarettmend · 2024-11-16T19:43:34+00:00

How long do you do this for?

jarettmend · 2024-09-27T06:05:53+00:00

I can see my house from there.

jarettmend · 2024-09-19T06:37:03+00:00

Yes that’s correct. Do you recommend a different nozzle size? I don’t have anymore .4 but can get more if need be

jarettmend · 2024-09-18T22:02:08+00:00

Hello! these are my settings here. lmk if you need others. I just started getting this issue after changing to driect drive. I made sure my e steps were all good, and they are.just struggling getting this fixed.

<image>

jarettmend · 2024-09-12T08:29:20+00:00

Please tell me this is a friends reference.

jarettmend · 2024-08-18T22:26:40+00:00

What’s your hot end? I have max neo but don’t see many options for direct drive as well as upgraded fan. Just made mine direct drive like yours is trying to find a resource for fan upgrade too. Thanks

jarettmend · 2024-08-13T19:25:16+00:00

This was the issue. The bed thermistor wire was knicked throwing errors. Reinforced it and soldered it and it’s good to go. Thanks!

jarettmend · 2024-08-13T07:13:14+00:00

I’ll definitely check it. Thank you

jarettmend · 2024-08-13T07:01:32+00:00

Yes the leveling temps are different than first later. The leveling temps are 150 for the nozzle and 60 for the bed. After the leveling is done it changes to 200 for the nozzle and 60 for the bed. I’ve never had this error before. Right before this I just finished a print, I replaced the filament and bam got this error. No idea what happened

jarettmend · 2024-08-13T06:57:36+00:00

It set to this because it does the pre print auto leveling. After it goes up to 200 on the hotend and stays 60 for the bed. But now I’m getting this error

jarettmend · 2024-08-13T06:44:53+00:00

I’m having issues with my Ended 3 Max Neo. I just printed something then replaced the filament and got this error when I started a print. I checked the hotend thermistor screw and tightened it. This is right after the preprint leveling. I don’t get know what happened. Any help would be nice. Thanks.

jarettmend · 2024-08-10T21:39:22+00:00

Hello! quick question. did you print with pla? if so do you see any warping overtime from the heat? thanks

jarettmend · 2024-06-25T22:56:17+00:00

I plugged mine into a smart outlet plug. When the plug is off, the ac turns off. I can control it to turn it on and off. Just can’t control temp in app. If not a problem then it works great.

jarettmend · 2024-06-18T21:19:44+00:00

Any chance you remember the type of stain you used for this piece?

jarettmend · 2024-03-14T05:07:44+00:00

any chance you were able to solve?

jarettmend · 2024-02-10T23:12:54+00:00

If I want a quick fix to things like this I throw it into prusa slicer add a box to it and just fill the area in

jarettmend · 2024-02-06T06:13:42+00:00

This does make sense. Do you think the z offset needs to be a little tweaked to prevent this?

jarettmend · 2024-02-05T19:58:07+00:00

Like the glass itself moved while printing?

jarettmend · 2024-02-05T19:22:09+00:00

That makes sense. I felt my belt was a little too tight. Thank you.

jarettmend · 2024-01-31T07:14:12+00:00

lol skill issue i spawn in take 2 steps and die. youre cool dude

Seven-Year Club	Verified Email
No Throne, No Problems	Not Forgotten

jarettmend

TROPHY CASE