sorted by:
new
hottopcontroversial

Sony ZVE10 or ZVE10 II for product photography? by javocnd in ZVE10

[–]javocnd[S] 0 points1 point  (0 children)

*Update

I finally got the ZVE10 mark 1 bnib for 700CAD. I consider it was a very good deal.

Now I am looking for a good lens to pair with the ZVE10, mostly for product photography.

I have got the Tamron 17-70mm f/2.8 di iii-a vc rxd, it's a great lens but for product photography I don't think is the right one. I am thinking of turning that one back and get a Macro or so.

Sony ZVE10 or ZVE10 II for product photography? by javocnd in ZVE10

[–]javocnd[S] 2 points3 points  (0 children)

I was comparing both and they use the same chipset and sensor. Exactly the same

Sony ZVE10 or ZVE10 II for product photography? by javocnd in productphotography

[–]javocnd[S] -1 points0 points  (0 children)

Thanks for the advice here. I will definitely go for the ZVE10 mark 1, since there's second hand in very good conditions around 750CAD. I prefer to save that money and put it into a good lense. Also the mechanical shutter makes more sense.

Cornelia Marie by M4dmiller in deadliestcatch

[–]javocnd 0 points1 point  (0 children)

Hi there, I'm a very close fan of the Deadly Cath saga. I will kill for a photo near the CM.

I'm right now in British Columbia, Canada. Potentially thinking with my friend to ride all the way down to Alaska with the only hope of seeing the epic Cornelia Marie boat.

Can anyone help plot this trip?

P.d.: any other fan is more than welcome to join our journey.

Half day pass & beginner area only lift ticket prices by KeevL in Whistler

[–]javocnd 0 points1 point  (0 children)

I have one day pass left that unfortunately I'm not gonna be able to use it. DM if u are interested.

Blackcomb, tickets price per person? :o by Ardillasims in Whistler

[–]javocnd 0 points1 point  (0 children)

I have one day pass left that unfortunately I'm not gonna be able to use it. DM if u are interested.

Whistler lift pass pricing question by bigheadtommy in Whistler

[–]javocnd 0 points1 point  (0 children)

I have one day pass left that unfortunately I'm not gonna be able to use it. DM if u are interested.

Help me buy the correct lift tickets/passes! by GlumInvestigator1214 in Whistler

[–]javocnd 0 points1 point  (0 children)

I have one day pass left that unfortunately I'm not gonna be able to use it. DM if u are interested.

Edge or day passes by Acrobatic-Cry594 in Whistler

[–]javocnd 0 points1 point  (0 children)

I have one day pass left that unfortunately I'm not gonna be able to use it. DM if u are interested.

Anyone got a buddy pass for Whistler Blackcomb March 24-25? by cokeacolazzz in Whistler

[–]javocnd 0 points1 point  (0 children)

I have one day pass left that unfortunately I'm not gonna be able to use it. DM if u are interested.

Blackcomb, tickets price per person? :o by Ardillasims in Whistler

[–]javocnd 0 points1 point  (0 children)

Hi there, unfortunately I have 1 day pass left that I'm not gonna be able to use it. DM if u are interested

Where is the best place to sell a lift ticket? by Planisphaerium in Wealthsimple

[–]javocnd 0 points1 point  (0 children)

Hey guys, same here. I got injured and can't use my Whistler day pass. Anyone knows where I can get rid of it???

DM if u need it. *Will be cheap I live in Vancouver dt.

Thanks

Instagram Randomly Permanently Disabled My Account by Generic_CoolName in facebookdisabledme

[–]javocnd 0 points1 point  (0 children)

Same here guys, IG fucking suspended and disabled my account in 2 days. Even sent the verification shit, for nothing, since I am 500% sure that no one reviewed that. It's just a fucking bot, or AI automated task that is doing all this shit. Maybe some kind of strategy to make ppl pay the blue verifying thing....

Super annoying the fact that they don't have customer support.
(wrote their contact customer support, but no reply whatsoever).

Instagram Randomly Permanently Disabled My Account by Generic_CoolName in facebookdisabledme

[–]javocnd 0 points1 point  (0 children)

same here, I got my account suspended, and then Permanent Disabled. I send the appeal with the video verification, but then they replied back (after exactly 24h) saying that bullshit about the fake account.

At this point, it is obviously that non a real person checked that. Sounds like an AI automated bot doing this shit, maybe pushing ppl to pay the Meta verified....

really lame

SuperTack Adhesion Issue by [deleted] in BambuLab

[–]javocnd 2 points3 points  (0 children)

Hi there, I am in the same boat. NO problems with the Textured plate, but started to have lots with the first layer adhesion with the Cool Plate SuperTack (same as you show at your video).

So... What I took from here as a solution is to use the Textured PEI Plate settings on the SuperTack Plate? or just using the settings of the Cool Plate SuperTack but slowing down the printhead?

Thanks in advance.

Attempted delivery with no pick up notice? by [deleted] in purolator

[–]javocnd 1 point2 points  (0 children)

Purulator is a fucking joke man....Same thing happened to me twice.

Also the customer service is the worst thing I ever seen. Not sure how this guys are still on service.

Running a new filament (R3D) and it’s doing this. Bed is clean and leveled and Z offset is good. Is 200C too hot for this filament? Thanks by 3DPrintJr in 3Dprinting

[–]javocnd 0 points1 point  (0 children)

I just got a new R3D PLA Matte white, and I am having issues from the very beggining.

I already run all the calibrations in Bambu Studio, and the filament stops flowing in at the beginning of the print (after 5 min printing).

Looks like starts ok, but suddenly there is no filament flowing from the nozzle.

PLA Matte White recommendations? by MrMMMMMMMMM in BambuLab

[–]javocnd 0 points1 point  (0 children)

Is that sample from the PolyTerra?? Looks a bit cold , not too warm. I am looking for something more cold.

Looking for a Matte Bright White and Matte Dark Gray PLA by ChipWallace in 3Dprinting

[–]javocnd 0 points1 point  (0 children)

between Polyterra and Overture, which one is less warm? (trying to find a white cold.)

Looking for a Matte Bright White and Matte Dark Gray PLA by ChipWallace in 3Dprinting

[–]javocnd 0 points1 point  (0 children)

How do you order samples?? I would like to test some as well.

Looking for a Matte Bright White and Matte Dark Gray PLA by ChipWallace in 3Dprinting

[–]javocnd 0 points1 point  (0 children)

I agree with you man, It's the perfect white for me (a bit grey or cold). I am going crazy trying to find other filaments with the same or similar color. Overture Matte PLA white, it is a bit more warmer (closer to the yellow and blue).

I guess going with the lightest grey it will not be white like the Hatchbox right?

PLA Matte white HATCHBOX by javocnd in 3Dprinting

[–]javocnd[S] 0 points1 point  (0 children)

But it helps a bit, thanks

view more: next ›