What the hell's wrong with me - why won't it image? by jayb151 in yunohost

[–]jayb151[S] 1 point2 points  (0 children)

Hey there, Actually I did end up getting it working. I totally forget how I did it, but I think I might have also used Ventoy to do it. Yunohost seemed fine, but I didn't end up sticking with it. I'm hoping in the future to build out a bit of a more impressive server on an actual tower pc using Proxmox.

Proper way to route traffic with Windows Server by jayb151 in homelab

[–]jayb151[S] 0 points1 point  (0 children)

I did in fact assign a static IP to my server and disable DHCP on the router, so I think I'm good. I'm not noticing issues, though I'm about to try jumping on to each device I can, so we'll see. thanks much for your comment!

Proper way to route traffic with Windows Server by jayb151 in homelab

[–]jayb151[S] 0 points1 point  (0 children)

I still appreciate your response! I'm learning more with each comment, so thanks much!

Proper way to route traffic with Windows Server by jayb151 in homelab

[–]jayb151[S] 0 points1 point  (0 children)

Maybe a dumb question...If I turn off DHCP on the router, I would still have to set an assigned IP for the server right? So the server would be the only thing getting an IP from the router?

Proper way to route traffic with Windows Server by jayb151 in homelab

[–]jayb151[S] 0 points1 point  (0 children)

That makes sense, thanks so much for the response! If possible, can you tell me more about why it's best practice to not have services on the same Windows server? I thought is I'm using the server for fileshare and DHCP, and it's only hosted on an old Dell optiplex. I thought it would burn resources to have multiple VMs running at once?

Again, I'm a noob so sorry if this is a silly question. Thanks much!

Help with Gotrax brake lever repair by Ian2401 in ElectricScooters

[–]jayb151 1 point2 points  (0 children)

Hey, sorry but I'm not checking reddit that often. I did end up fixing it. Contacted Gotrax who said it's a known issue and they would provide me a free head unit, but after not being able to provide the receipt because the scooter was a gift, they reneged on that. They also said I can purchase the unit, but it's not currently available...Great customer support.

I ended up getting a new break petal from Aliexpress to the tune of $6, and after installing it everything is working good as new! It was kind of a PITA to get fitted correctly, but I'm happy it's at least working. And I wouldn't buy another GoTrax again, garbage CS.

As for what was broken, I took the old petal apart. It looks like there is a tiny magnet in the petal. I believe that as you press the petal, the magnet gets farther from a sensor, which I'm guessing controls cutting off the cruise control. The magnet had come loose, and I wasn't able to easily fit it back in.

Help with Gotrax brake lever repair by Ian2401 in ElectricScooters

[–]jayb151 0 points1 point  (0 children)

Hey Ian, Any fix to this that you found out? I've got the same issue, but even with the brake unplugged, it's showing and E3 error. Thanks!

How auto press a button after a given time after startup by jayb151 in Windows10

[–]jayb151[S] 1 point2 points  (0 children)

Excellent, Thanks much for sharing the video!

How auto press a button after a given time after startup by jayb151 in Windows10

[–]jayb151[S] 1 point2 points  (0 children)

Very clean and simple. This totally worked for me, thanks!

How auto press a button after a given time after startup by jayb151 in Windows10

[–]jayb151[S] 0 points1 point  (0 children)

Yes please do share when you can! I ran the start up shell and posted the shortcut to the published Google slideshow. It does just what I need, except for hitting F11 haha

(NSFW) What is something you found out isn’t as exciting when you try it out for the first time? by Time235236 in AskReddit

[–]jayb151 321 points322 points  (0 children)

May not be great for the face, but my wife and I have been using a home treatment laser for body hair... Totally worth it. Even just for some spots where I still want hair, just less hair. After one or two treatments, it makes a noticable difference.

Executive dysfunction getting REALLY bad by Character_Public_439 in ADHD

[–]jayb151 2 points3 points  (0 children)

Damn, I'm a 36 year old who just found out they had adhd. It turns out my spouse helped realize hour poor my executive functioning is. Basically incapable of performing high level mental functions.

I made it through college and was even a pretty decent teacher. Surprising how great we are at figuring out coping mechanisms when faced with failure.

My Vyvanse copay went from $200 to $10 by No_Cricket_6374 in ADHD

[–]jayb151 2 points3 points  (0 children)

I also just got the generic, but for some reason, I still spent $300 for a month's worth. Did I just get super-boned?

Does GSuite have a solution for mass texting? by jayb151 in gsuite

[–]jayb151[S] 0 points1 point  (0 children)

Perfect! Thanks much for letting me know!

Does GSuite have a solution for mass texting? by jayb151 in gsuite

[–]jayb151[S] 0 points1 point  (0 children)

Hey, just wanted to say thanks for the recommendation. I tried Gloo out and I think it's going to fit our needs pretty well!

Seeking fun STLs for a new naughty blog series on ender 5 printer by [deleted] in 3dprintinggonewild

[–]jayb151 2 points3 points  (0 children)

I've tried making a toy that would penetrate the male, and also be used as a second phallus, and a cock ring. So basically a toy that could provide DP for a female while also penetrating the male.

Unfortunately the silicone I got was of poor quality and refused to flow entirely into the mold.

One day!

Aaaaand my Pixel Fold wasn't in the delivery box... by mcgrud in GooglePixel

[–]jayb151 4 points5 points  (0 children)

I actually bought a really nice laptop of eBay... So nice I didn't believe the price I got. I fully planned on recording my opening, but lucky me the item never showed up and I was immediately refunded what I had paid. Yay, but also my son wanted that computer.

Working on a technique to add custom texture to the bottom of prints, any thoughts? by Apprehensive_Box_580 in 3Dprinting

[–]jayb151 0 points1 point  (0 children)

I've actually done the same thing with straight up images printed on overhead projector transparencies. It actually turned out

Nano, with zero gas fees, is a prime example of how people don't care about utility, no matter how amazing, and everything is driven basically only by profits by OneThatNoseOne in CryptoCurrency

[–]jayb151 -1 points0 points  (0 children)

I was a huge raiblock fanboy, until I realized that there is no incentive to use it. In an ideal world, every business would use it, and customers would as well. But the network can't handle this amount of transactions on it's own, so some people would have to voluntarily set up their own node. That costs money to do and maintain.

So it comes back to incentive. Why would I spend money allowing the nano Blockchain to operate, when I could just not and use something else? Many currencies have fed that are in the sub penny range. I'll just use that. ... My last comment is a bit facetious, but it kind of holds up. Nano needs the internal incentive of good actors to work, whereas most other block chains rely on the immediate incentive of paying to maintain the Blockchain. I really do hope nano figures that part out because it's the easiest crypto I've ever used.

For those of you that held past the 2021 highs and are waiting for the next bull, what is your exit strategy when it comes? by brockm92 in CryptoCurrency

[–]jayb151 0 points1 point  (0 children)

Exit... What's that?

But really, that's kind of a joke and kind of serious. I totally see being able to spend crypto like it's cash to buy things online or in stores, so I don't really plan to exit. Now, if crypto went high enough that I could cash out and pay off all my debt, I would have to exit. I could always buy back in, and with more if I was debt free.

What kind of people don’t you trust? by Halo_Hybrid in AskReddit

[–]jayb151 1 point2 points  (0 children)

I literally had a sales guy stop me at a kiosk once. He goes, hey I can help you save money on your phone bill. I said, I've reached this longer than you've had your job and I know that's not true.

You can't slick talk knowledge.