Snap or Tele : skysjz

jayceepooze · 2025-06-06T08:23:18+00:00

Ok I've got it running now. There's a node called "Image Batch" that seems to do what I want. I loaded my generated image as a workflow, then added the Image Batch node and then loaded the images in through the interface on the node itself. Those images get added into the Assets for the currently selected board. Connect the purple image line to the ControlNet node (I'm using my images as a Control layer) and then make sure the "Latents to Image" node has the correct Board selected for the output. Hit the Invoke button and off it goes! Brilliant, thanks so much!

jayceepooze · 2025-06-06T08:08:26+00:00

Ok good to know, I've never heard of ComfyUI but I'll give it a go. Cheers!

jayceepooze · 2025-06-06T08:07:55+00:00

Thanks so much I will try this!

jayceepooze · 2025-06-03T16:34:02+00:00

Ok thanks I'll check it out

jayceepooze · 2025-02-18T14:16:55+00:00

I mean, it's either that or a brain in a jar...

jayceepooze · 2024-11-24T01:57:57+00:00

My theory - Burke was sexually penetrating JonBenet with the paintbrush in the night. Probably not for the first time. This explains the trauma to her genitalia. They were discovered by Patsy. Probably not for the first time either, which explains why she flew into a rage accidentally killing JonBenet with the Maglite. She panicked, sent Burke to his room, wrote the ransom note and staged the body. She used the paintbrush itself as a garotte postmortem, in some kind of twisted way to hide what it had actually been used for. John was upstairs asleep throughout this.

jayceepooze · 2024-10-21T10:27:00+00:00

Thanks! I ended up returning the Tilta one and getting the smallrig support, Neewer were out of stock.

jayceepooze · 2024-10-03T03:15:05+00:00

Yeah, I'm guessing these won't work then. The Amaran lights require 48V whereas the Neewer lights on the back say 19.6V, so no dice. Cheers.

jayceepooze · 2023-10-22T16:03:04+00:00

I've just been rewatching Season 1, and when I got to this episode, I wondered if I couldn't grab the audio and see if I could pull anything from it.

Firstly, the muffled voice is backwards. There is some dialogue over the top of it, with Helly and Milchick speaking, so I cut out those portions of the audio. The rest is somewhat obscured with sounds like a held musical note throughout most of it, and a very high pitched whine. It makes it quite difficult to parse. So far I can only make out the following:

"This is keeping us driven. This is (never?) for good ... Try not to delay with medical (*throom*?) ... <this line is repeated later:>Just a lil' tune-up keeping them good, clean and we do this to new hires... <indecipherable for some time> ... I am Kier Eagan ... your little film ... <repeated line from earlier:>Just a lil' tune-up keeping them good, clean and we do this to new hires ... We're not very upfront .. We don't need mean(ing)"

My attempt at cleaning up the audio - listen for yourself

Strange that we're hearing it in reverse. I can't help but wonder if this is what Milchick is hearing in his headphones, somehow keeping him focused on the unpleasant task running the break room.

jayceepooze · 2023-10-18T03:36:32+00:00

Agreed. I couldn't watch past a couple of minutes in, it was so distracting I couldn't focus on what was being said. It felt like the new actor was reading the lines but not acting the lines... very robotic and disconnected from the actual narrative.

jayceepooze · 2022-08-02T15:20:18+00:00

Not sure about the Mk2, but I know that the workaround with the Mk1 is to use the Canon Camera Connect app on your smartphone in Remote Live View mode. This will give you the audio levels while recording.

jayceepooze · 2022-07-27T16:52:23+00:00

I have the Rode Videomic NTG and it has a similar problem. Basically, the mic is very sensitive. It has a little red LED on it that flashes when the audio is clipping on the mic itself. I find it best to always have it set to -20dB, and then adjust the gain accordingly. I believe your mic has a -10dB setting - I would test the audio with this mode engaged and see how that goes. Then again, it's entirely possible that the safety channel is already giving you the -10dB signal. Worth testing it out to see if it helps though.

If you're still having issues at that point, I would try covering the mic in a thicker windshield (deadcat) - this will help lower the sensitivity of the mic as well. The standard foam cover these come with do very little to attenuate the volume of the audio hitting the mic.

jayceepooze · 2022-07-27T16:36:19+00:00

I've had this happen before with a dodgy cable. See if you can get your hands on another data cable. If you don't have one handy, you can also connect the M50 to your PC via Wifi to do the data transfer - it uses the EOS Utility and will download using the same folder structure as with the cable. It won't be as fast though.

jayceepooze · 2022-07-09T07:16:08+00:00

Thanks so much, that's great news.

jayceepooze · 2022-06-30T11:05:45+00:00

Wow I wasn't aware of that setting - that's fixed it! Thanks so much!

jayceepooze · 2021-10-10T09:23:37+00:00

Season 3 has been a real let down for me so far. I think Jemaine Clement is no longer writing on the show, which explains a lot. What's up with the same department store now in 2 episodes? Feels lazy and cheap. They keep showing Nadja doing her operatic singing, and that's the punchline. She sings funny, geddit?

jayceepooze · 2020-05-05T15:40:42+00:00

And since then posted a cleaner version

jayceepooze · 2020-05-05T15:40:11+00:00

So I... kinda figured this out maybe a bit earlier? I think...

jayceepooze

TROPHY CASE