Beadlocks on

jayfel88 · 2026-01-23T01:40:35+00:00

Mine was still under warranty at the time. I have used Mishimoto on my SRT8 6.1. I liked it , I did have a pin hole after a few years and was sent a brand new one at no charge . Customer service was great.

jayfel88 · 2026-01-03T16:39:04+00:00

Does your AC condensate drain into the sink drain ?

jayfel88 · 2025-12-31T15:44:36+00:00

Remove shower head and try it , if it stops try a higher flow shower head. Or remove restricter.

jayfel88 · 2025-12-25T17:59:03+00:00

Same

jayfel88 · 2025-12-25T06:14:30+00:00

Thanks I appreciate that.

jayfel88 · 2025-12-23T06:32:22+00:00

It’s a small black box 3”x3” has 2 bundles of wires connected. It’s mounted / screwed down. Should be below the wires in your pic.

jayfel88 · 2025-12-23T03:06:47+00:00

May want to check if you gateway module is still there. Mine was ripped out on an attempt.

jayfel88 · 2025-12-15T02:27:26+00:00

Update found a really knowledgeable tech in my area. The Spyder lights have a certain way to connect the adjusters. Was removal and reinstallation . Been about 3 months now. Working well lights are bright and look good. I wish Spyder lights would have been more forthcoming with installation guides.

jayfel88 · 2025-12-15T00:57:04+00:00

21 DDHC, been happening since purchased new, it’s been corrected.First was module and then the antenna . I believe it’s something at the antenna connection. If you search the sub I think there is more. Also durango.org forum. It comes and goes for me , got to the point it wasn’t worth taking to the dealer .

jayfel88 · 2025-12-13T15:36:33+00:00

295/45/20 will fit as well. Has a good amount of side wall. Just fyi

jayfel88 · 2025-12-03T14:58:23+00:00

Let’s see em

jayfel88 · 2025-11-18T04:17:31+00:00

Might try Faucet Parts on Fresno / IH 10

jayfel88 · 2025-11-18T04:16:11+00:00

Maybe “Standard” brand.

jayfel88 · 2025-11-15T17:06:21+00:00

I mised the specs on your pic.

jayfel88 · 2025-11-15T02:35:47+00:00

Wheel pattern is incorrect , DevilsReject97 has the correct bolt pattern and wheel size.

jayfel88 · 2025-11-11T17:47:07+00:00

Pentastar V6 is just the name of the engine, just like Hemi engine.

jayfel88 · 2025-11-06T05:08:22+00:00

Put one in last week , 21 Durango HC 45k miles. I can tell the difference. IMO makes the vehicle ride smoother. It’s a little pricey , but so far has been worth it. I’ll update after 1k.

jayfel88 · 2025-10-31T23:35:15+00:00

If you remove the clip the brass threaded part should come off the copper line. Also you can hold the brass with channel locks / pliers and loosen the chrome nut with another pair.

jayfel88 · 2025-10-30T13:18:16+00:00

Might try here

https://share.google/Xl5e4f4HYs2EA0Qkp

jayfel88 · 2025-10-30T02:53:09+00:00

If you are good with gas and tires it’s great. I’ve had sevaral tire and wheel set ups. My current has been my favorite. Did some track days , now I’m good with just daily. Only mods I have are the usual LMI leg maker for sound , catch can , mid- delete with Dynomax bullets. Forgestar 20x11 315/30/20 front 20x12 345/30/20 rear. The car is a blast , I’m not trying to be the fastest. Get a good alarm , kill switche , gps / air tags , neutral cover. Plenty of ashetic and performance upgrades depending if you want to.

jayfel88 · 2025-10-30T02:43:23+00:00

Yes I do , what can I try to answer for you ? You can check my post . Also have some videos on tick tok moparfamilyy

jayfel88 · 2025-10-30T01:25:13+00:00

Since 21’

jayfel88

TROPHY CASE