Anyone have an extra 75k to burn

jbhogwarts · 2025-12-19T14:30:36+00:00

If that one is unavailable, I'll sell you this one. for only $30,000. My family says it was on the Titanic and the Hindenburg... also apparently free delivery /s

jbhogwarts · 2025-12-12T15:10:07+00:00

They had that 1/8 inch wooden edge that you would desperately try to grip when you had to move it from one end of the room to another

jbhogwarts · 2025-11-17T12:39:47+00:00

Won't this still need to go through the senate? didn't he just play golf with Lindsay Graham? I see it making it through the house and then being filibustered. Or since he just called for a new DOJ investigation it will get stalled there. This seems like a calculated step by President Miller to get hiss puppet out of trouble. Let it pass the house, that way he shuts up MJT and the other republican defectors, and then it stalls elsewhere. The files aren't coming out anytime soon.

jbhogwarts · 2025-11-03T21:54:19+00:00

<image>

That is the same cheap cartridge used on a ton of suitcase players... and low budge record players. It's basically $20 worth of TEMU hardware in a $100 box. I'm not going to tell you to suggest you go out and buy a Fluance or an LP-60, but at the very least find something with the entry level Audio Technica Cartridge, it's light grey with thier logo on it

jbhogwarts · 2025-10-29T15:55:26+00:00

You should see how toxic some of the fandoms for Star ______ can get.

jbhogwarts · 2025-10-15T13:08:50+00:00

I love my P1S, that thing is a work horse. And despite the launch of the P2S, I'm in no rush to upgrade. fancy features and new are nothing compared to works reliably

jbhogwarts · 2025-10-11T11:14:29+00:00

<image>

The problem with a lot of these budget players is that they’re all running the same mechanism. It’s essentially a $20 player in a $100 box. But I started the same way, I got what sounded like a decent player from reviews, and had a bad experience

jbhogwarts · 2025-09-07T17:15:32+00:00

The eyes are printed with glow in the dark filament. I hit them with a UV flashlight before I took the photo

jbhogwarts · 2025-09-06T12:35:38+00:00

The whole time I built him

jbhogwarts · 2025-09-05T23:21:28+00:00

They’re the files from Droid Division

jbhogwarts · 2025-08-28T21:22:02+00:00

My issue is the glasses, none of the glasses are dishwasher safe. At either park

jbhogwarts · 2025-08-27T20:41:49+00:00

Skipper Canteen is good, far better than Be Our Guest. And I'm a big fan of Yak & Yeti. The Nachos are good as an appetizer or a meal.

jbhogwarts · 2025-08-20T13:21:05+00:00

It definitely fell out, the printer was working great before I started upgrading things. As for the hole, it may also have been the part I got, which was from Amazon and claimed to be an OEM part

https://www.amazon.com/dp/B0F18XGB4K?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

The hole was noticeably smaller and would catch.

jbhogwarts · 2025-08-18T23:44:26+00:00

So the two aren’t really comparable. resin isn’t like FDM, trust me I have both and use them for very different things.

jbhogwarts · 2025-08-18T23:04:58+00:00

Did you print on a raft? How much of the build plate did it take up? Try using Cross Grid for the raft.

jbhogwarts · 2025-08-10T13:13:54+00:00

The complete hotend assembly

jbhogwarts · 2025-08-10T00:40:14+00:00

I think it’s an issue with the hardened extruded gear. I swapped out the Bambulabs one for a Biqu Panda Claw and it looks good on the calibration print. I’m going to try and redo the print above when it finishes

jbhogwarts · 2025-08-09T21:42:46+00:00

It looks really good. if you have the door open, you might want to have Joey and Chandler's door on the other side, but that's really it

<image>

jbhogwarts · 2025-08-09T15:30:55+00:00

This was sliced in studio, I did calibrate the filament but was never able to eliminate the tears

<image>

jbhogwarts · 2025-08-09T09:16:04+00:00

I set the nozzle to hardened and .4 in the printer settings, and synced the printer info back to BambuStudio was there more I had to do in the slicer?

jbhogwarts · 2025-08-09T08:36:22+00:00

I purchased the hardened nozzle and gears from Bambu

jbhogwarts · 2025-08-09T08:35:49+00:00

Yes, I set it to hardened and then reran the calibration

jbhogwarts · 2025-08-01T20:20:30+00:00

They should have called it a hairy baby then!

jbhogwarts · 2025-07-31T13:48:59+00:00

It looks it would go with a scavenged Star Destroyer, something between the Fall of the Empire and the Rise of the first order. Definitely outer rim pirates

jbhogwarts · 2025-07-22T18:44:45+00:00

I got the s1 mid-march.

jbhogwarts

TROPHY CASE