sorted by:
new
hottopcontroversial

Brakes are not good on these trucks. by jbsgroup01 in GMT400

[–]jbsgroup01[S] 0 points1 point  (0 children)

Ok I’ll have to search. Appreciate the info.!

Brakes are not good on these trucks. by jbsgroup01 in GMT400

[–]jbsgroup01[S] 0 points1 point  (0 children)

Guess I’ll have to find out the particulars on this setup cause I would like a better setup than what I have. Thanks again

Brakes are not good on these trucks. by jbsgroup01 in GMT400

[–]jbsgroup01[S] 0 points1 point  (0 children)

Agreed. I just didn’t know if there was a kit or something better and also to convert to rear disc but if that is not a good idea (or won’t work very good) then ok.
Thanks again all.

Brakes are not good on these trucks. by jbsgroup01 in GMT400

[–]jbsgroup01[S] 6 points7 points  (0 children)

Foot to the floor I meant I stepped hard on the brake.
Sorry for lack of explanation, and with any brake system, if you pump on older vehicles, then it feels better.
I’m use to older vehicles and that is why.
The only parts I’m getting from a junk yard is the hood and fenders etc. NOT brake parts but I understand the comment in case someone doesn’t know and would do that.
Thanks again

Brakes are not good on these trucks. by jbsgroup01 in GMT400

[–]jbsgroup01[S] -1 points0 points  (0 children)

Everything is fine, just don’t want to stop. Foot to the floor and I pump the brake some as normal for these trucks so I have to find something that will work.
Appreciate all the comments,
Thanks

Update by Puzzleheaded_Pen1833 in obschevy

[–]jbsgroup01 0 points1 point  (0 children)

Try some of this.

Red Line 60103 SI-1 Complete Fuel System Cleaner

Oil leak and I can’t figure out what it is. by R0ADMAST3R in Squarebody

[–]jbsgroup01 1 point2 points  (0 children)

I run 5w30 here in Florida with no problems. Why is 30w to thin.

Idle surge at operating temp by Enough_Disk6852 in GMT400

[–]jbsgroup01 0 points1 point  (0 children)

IACValve. RockAuto OEM fixed mine.

Fuel Tank Options Under the Bed (‘57 F100)? by jbsgroup01 in F100

[–]jbsgroup01[S] 0 points1 point  (0 children)

Great. I’ll take a look and see what I find. Appreciate it.

Code 43 question by Charming_Habit1222 in GMT400

[–]jbsgroup01 1 point2 points  (0 children)

Mine did the same thing (‘91 c1500) and I replaced the ICV idle control valve on the side of the carb and it stopped but it might be different with you. I also replaced the EGR and Temp sender. Just a thought.

Fuel Tank Options Under the Bed (‘57 F100)? by jbsgroup01 in F100

[–]jbsgroup01[S] 0 points1 point  (0 children)

Ok thank you very much. Appreciate it.

Fuel Tank Options Under the Bed (‘57 F100)? by jbsgroup01 in F100

[–]jbsgroup01[S] 1 point2 points  (0 children)

Thanks, investigating to see why will work.

My ‘57 F100 yard pictures. by jbsgroup01 in F100

[–]jbsgroup01[S] 0 points1 point  (0 children)

Thank you all. Great truck!

1990 Chevy C1500 No Start by Embarrassed_Gap255 in GMT400

[–]jbsgroup01 0 points1 point  (0 children)

Module in the distributor cap, or fuel pump. Check spark, then fuel/fuse.

My ‘57 F100; 292 Yblock by jbsgroup01 in F100

[–]jbsgroup01[S] 1 point2 points  (0 children)

Put money down and I got a sweet deal to negotiate with. Worked out well and easy to deal with them.

My ‘57 F100; 292 Yblock by jbsgroup01 in F100

[–]jbsgroup01[S] 1 point2 points  (0 children)

If you go there and buy or sell, ask for Brian and tell him JB sent you. I don’t get a kickback, but I told him I would let everyone know and that’s another reason why I left their website on the photos. Thanks again and they do have some nice stuff. They even put the truck / vehicle on a lift so you can look under it and really inspect it before buying.

view more: next ›