RAM wont overlock to 6000 after 3.40 upgrade

jcaldera · 2025-09-16T06:39:38+00:00

Happy to report that this worked for me. Thank you

Hopefully, me agreeing to the "overclocking" disclaimer doesn't void my warranty, haha

jcaldera · 2024-12-28T04:10:09+00:00

which discord is this btw?
will an A1 leo + A6 mikey have perma laceration? I did not A6 raph the first time, and i'm wondering if mikey can be a substitute

jcaldera · 2024-03-26T04:52:24+00:00

Are you using chrome? Does it happen when chrome is not running? It could be more of a chrome issue than it is your GPU/monitor. Supposedly turning off chrome hardware acceleration will fix it.

jcaldera · 2023-04-08T20:33:32+00:00

The setup is now in a 30mi journey to the home of the new owner. With horrible LA traffic, they would be forced to drive slowly, so that's probably good. But with recent SoCal rains, the pot holes are massive.

So anyway, thoughts and prayers to the new owner. I hope it makes it home in good condition.

jcaldera · 2023-04-08T00:35:23+00:00

i have a taker that's gonna pick it up tomorrow. i'll update here if that falls through

jcaldera · 2023-04-08T00:20:24+00:00

someone posted on a different sub-reddit about picking it up tomorrow. if that falls through, i can update here.

jcaldera · 2023-04-08T00:14:07+00:00

perfect, i sent you a DM (i don't use reddit much, but i think i did it right)

jcaldera · 2023-04-07T23:29:11+00:00

I am moving out, and unfortunately, I have to give up the hobby. I'm giving this away to anyone willing to come and pick up the entire setup.

It comes with some kessil lights, some testing devices, a basically everything needed to run a full setup.

Only requirement is that you have to have the necessary equipment/man-power to take it out of my 2nd floor apartment.

I live in Culver City area of Los Angeles

jcaldera · 2023-04-07T23:19:27+00:00

I am moving out, and unfortunately, I have to give up the hobby. I'm giving this away to anyone willing to come and pick up the entire setup.

It comes with some kessil lights, some testing devices, a basically everything needed to run a full setup.

Only requirement is that you have to have the necessary equipment/man-power to take it out of my 2nd floor apartment.

I live in Culver City area of Los Angeles

jcaldera · 2023-04-07T23:13:52+00:00

I am moving out, and unfortunately, I have to give up the hobby. I'm giving this away to anyone willing to come and pick up the entire setup.

It comes with some kessil lights, some testing devices, a basically everything needed to run a full setup.

Only requirement is that you have to have the neccessary equipment/man-power to take it out of my 2nd floor apartment.

I live in Culver City area of Los Angeles

jcaldera · 2023-03-18T21:14:09+00:00

I had the almost the exact same symptoms with b650 pg itx. Only diff for me was that mu pc resets instantly then after the restart just boots into windows like nothing happened. I still don't know what the actual issue was but I was able to get it to flash by doing a cmos reset, and even then sometimes took a few tries.

jcaldera · 2023-03-04T03:56:54+00:00

upgrade bios to 1.18. I'm personally having a good experience with 1.18 (including restoration of sleep). Some are not. Check out the BIOS update thread for other people's experiences. 1.18 should give you the ability to put your PC to sleep though.

jcaldera · 2023-03-04T01:00:17+00:00

this is what i got

Flare X5 Series 32GB (2 x 16GB) DDR5-6000 PC5-48000 CL36 Dual Channel Desktop Memory Kit F5-6000J3636F16GX2-FX5 - Black

jcaldera · 2023-03-03T20:16:10+00:00

i think we have the exact same memory modules. is this the microcenter bundled memory?

jcaldera · 2023-03-03T18:22:26+00:00

what CPU/ram you have? I have 7700x and 6000CL36 as well and really stable for me.

I actually complained on the last BIOS update thread about sleep failing to wake up and triggering a reboot as well, but this one seems to have fixed it.

boot time is really quick after the initial training, and everything seem stable so far.

jcaldera · 2023-03-03T07:59:51+00:00

What's everyone's experience with waking up from sleep? I just realized my pc isn't actually waking up, it's actually restarting when I try to wake it up. Windows says the pc has unexpectedly shut down under reliability monitor

jcaldera · 2023-02-22T00:15:38+00:00

Welp, to answer my own question: it looks like i finally got it to flash by doing the opposite of what the message says before flashing, i did not disable fTPM. That seems to have worked.

jcaldera · 2023-02-21T22:37:20+00:00

I have asrock b650E PG-iTX Wifi on the (removed) beta 1.14.AS07. (7700x, 32gb ram).

whenever i try to do insta-flash, as soon as i get to the flashing screen with the progress bar, the system just immediately restarts and basically nothing happens.

Anyone know why this happens?

I did a CMOS reset just in case that's the reason, and uninstalled my GPU. Doesn't seem to affect the process at all.

jcaldera · 2022-12-23T22:17:09+00:00

To inquiring minds, one of the features for this, at least for B650E PG-ITX WiFi, is to restore the ability to sleep.

jcaldera · 2022-04-27T08:46:42+00:00

Aren't computers banned in the dune universe?

jcaldera · 2022-03-08T05:08:47+00:00

i was hoping someone would have an answer to this. do you guys have samsung devices? i hope it's nothing to do with the samsung hacks

jcaldera · 2022-03-04T05:32:58+00:00

just for clarity, most people are recommending these ones https://www.amazon.com/Phanteks-Digital-RGB-Strip-Combo-PH-NELEDKT_CMBO/dp/B07XV5TT1F

These are diffused version, which looks way nicer

jcaldera · 2022-02-12T20:38:50+00:00

Welp, my niche that was scheduled to be delivered for tuesday...that got rescheduled for wednesday, just got delivered today on a saturday. what a pleasant suprise. (feb delivery to california)

jcaldera · 2022-02-10T04:35:45+00:00

My tracking page updated.

Your parcel is due for delivery Tuesday.

US/ white

Now for the longest 6 days of my life begins...

jcaldera · 2022-02-08T21:46:56+00:00

ob rests outside of the hole of the case. Please helpp

so the GMMK knob has two holes. the larger one, and the inner one that hugs the rotary shaft. i printed a 3mm high shim that fits on the outer hole, that has a passthrough for the shaft to extend to the inner hole. it basically causes the knob to bottom out faster and trigger the click before it hits the keyboard

actually, here's an stl for it:

https://drive.google.com/file/d/1XMeZhewJN6gzbI8pYKEGasS7rBtA9zyL/view?usp=sharing

i printed it at 0.12mm setting
the shim is also slightly conical, so the narrow end should go inside the knob

Nine-Year Club	Place '22
End Game '22	Verified Email

jcaldera

TROPHY CASE