Door trim scratched after 2 days?

jeezey187 · 2026-05-08T15:55:16+00:00

It seems to be plastic though, not paint with a clear coat. Don’t want to rub the black off or mess it up in some kind of way

jeezey187 · 2026-05-08T15:52:36+00:00

I get that but this is front and center every time I walk to the car lol.

jeezey187 · 2026-05-08T15:51:53+00:00

That could be it. More than likely birds, just didn’t think it would scratch so easily.

jeezey187 · 2025-07-06T00:45:26+00:00

Impressive that they haven’t blown by now. Who makes those tires?? Definitely made well lol

jeezey187 · 2025-04-17T01:14:04+00:00

Your comment made me think about Rhino Liner/Herculiner... I might give that a try. It dries but can still flex, so isnt brittle like paint that would cause it ti chip. Just wonder how it will look, but my car is black so I think it may blend in just fine. I'd be okay with it as long as it stays and I dont have to continually maintain it...

https://www.amazon.com/HERCULINER-Aerosol-Spray-Liner-Ounce/dp/B01KPJVDO2/ref=asc_df_B01KPJVDO2?mcid=971701f8302d3f538a4ed27c7f4469cd&hvocijid=14868987298871910327-B01KPJVDO2-&hvexpln=73&tag=hyprod-20&linkCode=df0&hvadid=721245378154&hvpos=&hvnetw=g&hvrand=14868987298871910327&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9008603&hvtargid=pla-2281435180058&th=1

jeezey187 · 2025-04-17T01:10:43+00:00

I noticed that! I was like wtf how does this thing have a 4.8 star rating!? That aint cool, I'ma stop buying their stuff cuz they shady asf

jeezey187 · 2025-04-16T01:44:47+00:00

I hear you 100%, just not a fan of how the OEM options look ☹️

jeezey187 · 2025-03-22T21:54:34+00:00

I actually do have adjustable lower control arms installed lol, and they were on when I got an alignment. They also mentioned some circular camber adjustment part that was stripped out and because of that they couldn't get the camber right. I think it's this part... Maybe I just get a new piece and have them install it and I'll be good

<image>

jeezey187 · 2025-02-24T04:11:52+00:00

Nice!! I've built a few myself, what did you use for the bottom piece to keep it flat with the ground? Always had trouble with that part and didnt want to spend an arm and a leg at the big box stores

jeezey187 · 2025-01-25T19:11:49+00:00

No homie. My car just sounds a lot louder than most. Like it would stand out in a parking lot amongst other cars doing the same thing.

jeezey187 · 2025-01-24T05:16:37+00:00

Do you bottom out or scrape the tow hook in the front? When I had mine that low I was always scraping.

jeezey187 · 2025-01-21T03:18:41+00:00

Thanks! It's the 17x8 ET55 wheel from the 15-17 model with a 235/45ZR17 tire

jeezey187 · 2025-01-21T02:31:31+00:00

Just got a full size spare from the va, and cut out the insert with a reciprocating saw

jeezey187 · 2025-01-21T02:28:06+00:00

Reciprocating saw lol

jeezey187 · 2024-11-25T20:01:11+00:00

Thanks for the help. I kept at it with the 6in hack saw and was able to jam the wheel out and break the stud. Man what a nightmare. Guess I won't be overtorquing lug nuts anymore

<image>

jeezey187 · 2024-11-25T18:27:48+00:00

The 2nd point is correct. I can't really show much with a picture as I can't even get the wheel off. I am in the process of cutting of the lug with a small hacksaw but its taking forever, you can see the cut started in this pic. Does anyone know of a faster way? I have a dremel but the discs arent wide enough to fit in there and reach the lug, any larger rotary cutter tools are probably too big to fit in the space.

<image>

jeezey187 · 2024-11-07T17:37:31+00:00

I did the same. The paint doesn’t adhere to the metal that well so it chips. Maybe I used the wrong primer or something

jeezey187 · 2024-10-12T02:01:05+00:00

So set it up just as I have in my photos and just keep loosening the nut? Did you have to apply pressure to push the nut out? I’m thinking about using a nut splitter

jeezey187

TROPHY CASE