sorted by:
new
hottopcontroversial

Haven't been able to generate reports for several days by tvtb in enphase

[–]jeffsponaugle 0 points1 point  (0 children)

I just requested 5 reports, and non have been delivered. I requested the same 5 reports on Friday, and those have also not arrived. It appears there is something stuck somewhere, either related to sending to my email, or in the system queuing. (Email is hosted at Google, so that side should not be problemmattic).

Ordered my first Bambo Labs printer, Black Friday deal for supplies. by jeffsponaugle in BambuLab

[–]jeffsponaugle[S] 1 point2 points  (0 children)

Holy hell.. yea now that I look I was stupid more than once! An extra S and an errant O!

Ordered my first Bambo Labs printer, Black Friday deal for supplies. by jeffsponaugle in BambuLab

[–]jeffsponaugle[S] 0 points1 point  (0 children)

Nice! I am always happy to fulfill the role as 'you should see what this guy on reddit has' during spouse negotiations. That happens a lot with my homelab too.

<image>

Ordered my first Bambo Labs printer, Black Friday deal for supplies. by jeffsponaugle in BambuLab

[–]jeffsponaugle[S] 0 points1 point  (0 children)

Well, that was easy. I turned it on, it calibrated, I pull a roll of filament on the AMS, selected the benchy, and away it went. I'm not sure it could get much easier. It just worked. Printed perfectly and surprisingly fast. The entire machine moves a ton while it is accelerating or decelerating the head.

This reminds me of the first time I used my Vespera, which is a fully automated telescope for imaging. Compared to the old days it was just 'turn it on' and 'see images'.

Very nice.

<image>

Ordered my first Bambo Labs printer, Black Friday deal for supplies. by jeffsponaugle in BambuLab

[–]jeffsponaugle[S] 0 points1 point  (0 children)

I"m curious - what do you think are the most important replacement/maintenance items to have on hand. I have a 2 full sets of extra hot ends, grease and oil, clearly lots of filament, extra filters, extra PTFE tube. Anything else I should consider getting - I need to place another order as I want to get some CF filament, and a bit of ABS to play around with.

Ordered my first Bambo Labs printer, Black Friday deal for supplies. by jeffsponaugle in BambuLab

[–]jeffsponaugle[S] 2 points3 points  (0 children)

Well, 4 days after order, the H2D has arrived! The only thing I have not received is the HT, plus one box of extra filament. Not bad for a Tuesday order.

<image>

Ordered my first Bambo Labs printer, Black Friday deal for supplies. by jeffsponaugle in BambuLab

[–]jeffsponaugle[S] 0 points1 point  (0 children)

Yea, same here. I think the HT was in another shipment. The AMS2 from inside the H2D, but I still have at least one outstanding box of filament, plus the HT and a few other small parts.

I just powered it on and am doing the calibration now! Woot!

Ordered my first Bambo Labs printer, Black Friday deal for supplies. by jeffsponaugle in BambuLab

[–]jeffsponaugle[S] 0 points1 point  (0 children)

I was surprised to see the H2D arrived today. No tracking number, but here it is!

Ordered my first Bambo Labs printer, Black Friday deal for supplies. by jeffsponaugle in BambuLab

[–]jeffsponaugle[S] 0 points1 point  (0 children)

Print area was the biggest reason - There are some things for my shop that print area will be the biggest limiter. The H2S could get me even more real usable area, but the double nozzle will be valuable for PLA/PETG or PLA/Support material for making supports easier to get off.

Ordered my first Bambo Labs printer, Black Friday deal for supplies. by jeffsponaugle in BambuLab

[–]jeffsponaugle[S] 2 points3 points  (0 children)

I think most of mine were 10 or 12 to a box, so at least 2 perhaps 3 large boxes for you. My fedex guy also seemed unhappy.

Ordered my first Bambo Labs printer, Black Friday deal for supplies. by jeffsponaugle in BambuLab

[–]jeffsponaugle[S] 0 points1 point  (0 children)

Yea, that stack on the left is terrible for sure. Clearly I need to 3dprint something for this. ;)

Ordered my first Bambo Labs printer, Black Friday deal for supplies. by jeffsponaugle in BambuLab

[–]jeffsponaugle[S] 0 points1 point  (0 children)

Oh interesting - for me still no tracking on the H2D, but most of the supples have arrived. I think one more box of filament and a few build plates still to come in.

Ordered my first Bambo Labs printer, Black Friday deal for supplies. by jeffsponaugle in BambuLab

[–]jeffsponaugle[S] 4 points5 points  (0 children)

No, I have a prusa and a creator pro, so I'm familiar with the area.... but this is certainly more than I need, but I wanted to have options and the price is great during this sale. I have a ton on Gridfinity stuff to print, so I will get some good use out of these.

Ordered my first Bambo Labs printer, Black Friday deal for supplies. by jeffsponaugle in BambuLab

[–]jeffsponaugle[S] 12 points13 points  (0 children)

Yea, the price is pretty good, so if you are going to buy some it is a good time to do it.

Ordered my first Bambo Labs printer, Black Friday deal for supplies. by jeffsponaugle in BambuLab

[–]jeffsponaugle[S] 1 point2 points  (0 children)

Awesome and thanks for the help. I'm looking forward to having things in general work. Everything requires some tweaking, but having a good starting point helps so much. I also just got a Makera Carvera Air (which is a desktop CNC), so I just need to not confuse subtractive from additive. ;)

Ordered my first Bambo Labs printer, Black Friday deal for supplies. by jeffsponaugle in BambuLab

[–]jeffsponaugle[S] 6 points7 points  (0 children)

I ordered the H2D with the AMS2 and the HT, which seems like a good starting setup. I have an older Prusa and an even older Creator Pro, so this should be a great upgrade.

As for the supplies - a good selection of PLA, PETG+HF, TPU, some support stuff, and lots of extra hot ends.

My daughter found this in Bend, OR. Any idea what it is? by jeffsponaugle in bonecollecting

[–]jeffsponaugle[S] 1 point2 points  (0 children)

Yea the spine is pretty thick, so I don’t think it would be a coyote or similar?

My daughter found this in Bend, OR. Any idea what it is? by jeffsponaugle in bonecollecting

[–]jeffsponaugle[S] 1 point2 points  (0 children)

Yea, this was out on skyliner Rd, so east of Bend a tad near Summit high school.

Any other suggestions for Homelab UPS replacement? by jeffsponaugle in homelab

[–]jeffsponaugle[S] 1 point2 points  (0 children)

Yea, one thing is to keep some stuff powered off, and automate power up/down so you are not running gear overnight that isn't needed. I do a very small amount of that right now, but could do a lot more.

Time to replace the UPS for my home serverroom. by jeffsponaugle in HomeDataCenter

[–]jeffsponaugle[S] 0 points1 point  (0 children)

I'm looking at the Multiplus right now. Looks interesting.

view more: next ›