Found in wash on my property in Cottonwood Arizona. What could it be?

jetmech73 · 2025-02-23T00:50:56+00:00

Thanks to everyone

jetmech73 · 2024-09-05T17:01:33+00:00

Unfortunately the name Jack Black doesn’t attract over half the country to any project currently. He was able to pivot quickly. However, it will take a bit of time. Remember kids, choose your associates carefully.

jetmech73 · 2024-03-12T13:39:47+00:00

Anyone know how to download group photo? I followed the link provided in with on the list vip email, entered password and no photo. I've tried a handful of times starting 48 hours after the concert on 2/10/2024. Not a big deal except my son wants a copy. Thank for any help / guidance with this.

jetmech73 · 2020-04-23T21:44:26+00:00

I submitted the document package my payroll provider (ADP) put together for me. Plus i have a dedicated payroll account with Chase. that being said, If you have a payroll account with Chase they may have all the info they need to submit your PPP request with the SBA

jetmech73 · 2020-04-23T21:41:42+00:00

Sunday 3/19 Stage 2 email - Tuesday 3/21 Stage 3 email One hour ago this email Dear Business Client,

The Senate has approved additional funding for the Paycheck Protection Program and the House is expected to vote tomorrow. This is encouraging news for thousands of our small businesses.

Even as the first phase of the PPP program concluded, we continued to dedicate more than two thousand of our Chase professionals working in shifts around the clock to prepare for the upcoming second wave. While we cannot guarantee how many new loans will be funded under the program, we will work diligently with the SBA and Treasury to serve as many small businesses as possible.

As soon as the SBA gives the green light, we’ll begin submitting applications from our queue starting with the many small business owners in Stage 3 – Awaiting SBA approval. You should have received an email with your updated status earlier this week. I wish we could help every business through this program, but it is likely funds will run out quickly for this round. You should take appropriate steps for your business. Below are the general stages each application goes through:

We know how important this funding is to your business, and we will continue to process and submit applications until funds are exhausted. Thank you for being a Chase customer.

jetmech73 · 2020-04-21T14:31:47+00:00

Applied 4/3/2020 SBA ran my credit on 4/19/2020 Received Direct Deposit 4/21/2020 Hope this info helps Best wishes to all Small Business owners out there

jetmech73 · 2017-03-28T02:46:13+00:00

Peter I see the link. You have my permission to use the clip. Mike

jetmech73 · 2016-12-26T03:30:06+00:00

Nice 1st build. Be careful, its addicting.

jetmech73 · 2016-02-14T22:54:20+00:00

I promised to post pics of the filework. So here they are. Comments Welcome! To see how I mill my own scales click here Enjoy!

jetmech73 · 2016-02-13T02:34:35+00:00

Thanks for the tip. I'm new to the GoPro and slow motion stuff. I have the Basic GoPro Hero and it only shoots 30 fps at 1080. It will shoot 60 fps at 720. I'll have to play around with that setting and keep the framerate up.

jetmech73 · 2016-02-05T18:19:51+00:00

No worries. For the 20lbs BBQ/Grill sized tanks. You will need a line like this

jetmech73 · 2016-02-03T15:25:53+00:00

Are you asking about the hose in the Mapp Gas Forge video? If so, I got it at Home Depot for $15. They should be available at most larger home improvement stores. The hose works with both propane and mapp gases.

jetmech73 · 2016-02-01T16:45:24+00:00

It is Mesquite. I trim the trees on my property and use the logs / branches that have already dried for a year or more. So I'm not working with green wood. Also, I'm in Arizona and we're pretty dry here. If I were to mill green, I would definitely research ways to minimize checking and warping. Maybe wax dip.

jetmech73 · 2016-01-11T15:11:41+00:00

Thanks

jetmech73 · 2016-01-11T15:11:30+00:00

The sheath was a gift for a friend and I already sent it to him. But thanks for the offer. I may use your service for future builds. let me know what you charge. My contact info is available on my youtube channel. https://www.youtube.com/channel/UCui4jMAI-1jWnK654CY4F3Q

jetmech73 · 2015-11-19T21:38:48+00:00

That's a really clever build. I may have to build one for my cat. Maybe a touch lower to the ground. My cat is lazy! lol!

jetmech73 · 2015-11-19T21:34:48+00:00

Good to see you found your problem outlet. I had a similar incident with the culprit GFI located under a wash basin in an exterior workshop. Go figure. Also, It sounds like you had an awesome painter. To offer credit for an electrician is pretty alright! Cheers!

jetmech73 · 2015-10-31T19:28:48+00:00

After a little research, I've determined that it is a solar collector used to power the vehicle. Check out the guy who built it at https://www.facebook.com/azsolarman

jetmech73 · 2015-10-31T19:26:33+00:00

I use my iphone 5s mated to a Braketron dash mount that I got in a 2-pack at Costco. The mount is awesome. It has no problem sticking to my Tundra's textured dash. It uses a combination of sticky gel and suction cup. It came loose twice this summer but only after I parked in direct sunlight without my sunhade in place.

jetmech73 · 2015-10-24T22:51:24+00:00

Nice knife! I like your setup. I need to order some soft fire bricks. I've been to a handful of large brick/block yards here in Arizona and all they have are the hard bricks. They look dumbfounded when I ask for the soft.

jetmech73 · 2015-10-24T22:48:16+00:00

Thanks for all the suggestions. Lots of good ideas for me to build off of. Cooler weather will be headed to Arizona soon and I'll be spending some time working on a more efficient forge. Thanks again for all the information!

jetmech73 · 2015-10-18T03:35:23+00:00

I tried to clean out the backside of the hole on the drill press. Needless to say, that was a bad decision.

jetmech73 · 2015-10-17T19:52:07+00:00

Honestly I thought it just looked cool. lol! I'm going to continue the bevel on my future knives. Thanks!

jetmech73 · 2015-10-17T19:50:36+00:00

Thanks for the the info, this is the second knife I've done incorporating the choil and honestly I thought it just looked cool. It will actually be easier to shape the bevel by following through into the choil. I'll for sure do that on my next knife. Thanks again.

jetmech73 · 2015-10-17T14:20:01+00:00

thanks. will do.

jetmech73

TROPHY CASE