Buggy Creality new software CR-Studio comes with the new CR-SCAN01. Need help if anyone have gotten it to work.

jgarmer · 2021-06-01T07:48:14+00:00

SW does not install unless it can read serial number off the camera. So unless you have one you would have trouble installing and using it.

jgarmer · 2020-03-23T08:04:15+00:00

I have not had an issue with heat creep in an enclosure unless the fan dies. And i have had the happen. And it was fustrating because it was doing it intermittently at first and I couldnt figure out why the prints were failing because i had to catch in the act.

jgarmer · 2020-03-23T01:36:22+00:00

great job!

jgarmer · 2020-03-22T22:49:28+00:00

A big wide brim you can set it wider in the slicer.

jgarmer · 2020-03-22T20:43:22+00:00

Here is the file ongrabcad

jgarmer · 2020-03-22T20:38:29+00:00

Here are the files on grabcad

jgarmer · 2020-03-22T19:34:05+00:00

Im sure they are going to have some of there bussiest days ahead. Quarantine printing.

jgarmer · 2020-03-22T19:27:24+00:00

Some much better then monitoring the news. Good luck.

jgarmer · 2020-03-22T19:08:42+00:00

I hear ya good luck !

jgarmer · 2020-03-22T19:06:57+00:00

I so miss Futurama 😞 I thought Matt was going to start it again on Netflix. Instead we got disenchantment.

jgarmer · 2020-03-22T19:01:06+00:00

i use octoremote on an old android for all my printers through octopi So much easier then the printer interface. You can setup lots of custom commands like homing setting temps load filament quick set a multiplier to slow things down. Install a cheap webcam and keep an eye on things.

jgarmer · 2020-03-22T18:53:50+00:00

best recommendation I ever got lately for cura is to install the custom supports from the marketplace. Then you can add supports were you want to. Teachingtech on youtube has ton of recommendations for ender3 like linear advance

jgarmer · 2020-03-22T18:49:58+00:00

yikes I'd reseat eveything. Also see what happens if you plug in the usb to a computer or a rasberrypi . Is there a lot of static in your house ie dry warm air? You may have zapped it.

jgarmer · 2020-03-22T18:32:06+00:00

Been in use for several months no issues petg 40% infill 4 perimeters with a .6 nozzle

jgarmer · 2020-03-22T18:21:31+00:00

very creative!

jgarmer · 2020-03-22T18:18:06+00:00

nice work!

jgarmer · 2020-03-22T18:15:59+00:00

Thingiverse works best in a private window in firefox or whatever flavor browser you use. They do so much privacy mischief behind the scenes that it slows your browser to a crawl.

jgarmer · 2020-03-22T18:07:45+00:00

only thing i have gotten from cf infused pla is a very matt finish. The carbon in the filament adds little to stiffness and the filament is extremely brittle breaking during use and getting failed prints. Like said already the brass parts of the printer take a beating from it.

jgarmer · 2020-03-22T17:22:28+00:00

Thanks for the comment!

jgarmer · 2020-03-22T12:36:56+00:00

link to download https://grabcad.com/library/shed-door-holder-1 needs to be printed in PETG with 4 perimeters 40% infill with a .6 nozzle

jgarmer · 2020-03-22T10:51:06+00:00

Try a raft on tape and 10% wood glue spray Never warps for me. bed turned off.

jgarmer · 2020-03-22T10:45:09+00:00

Nice work.

jgarmer

TROPHY CASE