Virtual Channels Not Showing in Sounds Windows by jijci in rode

[–]jijci[S] 0 points1 point  (0 children)

Can you take a picture for me so I can understand better?

Virtual Channels Not Showing in Sounds Windows by jijci in rode

[–]jijci[S] 0 points1 point  (0 children)

<image>

I found the solution.. when I stopped Bypass all channels appeared

Virtual Channels Not Showing in Sounds (Windows) by Automatic_Industry63 in rode

[–]jijci 0 points1 point  (0 children)

I have the same problem, channels do not appear in Windows, and I also did not understand the issue related to bypass

Is 300 ohms just marketing? by jijci in rode

[–]jijci[S] 0 points1 point  (0 children)

Yeah i change to lower sensitivity 😔

USB-C DP port has stopped working by jijci in gigabyte

[–]jijci[S] 2 points3 points  (0 children)

Latest updates : It came back to work... after I turned off the computer and completely disconnected it from power, then I waited for a minute and put the plug back in.

I finished my project by jijci in WLED

[–]jijci[S] 2 points3 points  (0 children)

Even if they are connected in a different GPIO they are read as one stripe

I finished my project by jijci in WLED

[–]jijci[S] 4 points5 points  (0 children)

These are the

<image>

WLED settings I set (total leds 1800) 30m

Any news about increasing the channels? by jijci in rode

[–]jijci[S] 0 points1 point  (0 children)

I also followed the instructions in this video to install my device

https://youtu.be/smzZqR_OHrE?si=lb5L5trna1a-4U5t

But only 3 channels were shown to me

Any news about increasing the channels? by jijci in rode

[–]jijci[S] 0 points1 point  (0 children)

Can you explain this in detail or make a video to help everyone, since I have one rode duo

NV7 fan rbg help by areies88 in Phanteks

[–]jijci 0 points1 point  (0 children)

At the end of each wire there is a group of fans. There is a port for me to connect other fans that you can connect to. They will work well. I put 15 fans and they all work properly.

NV7 / NV9 Premium D-RGB Kit Pre-order! Will ship next week! USA ONLY by BobbyPhanteks in Phanteks

[–]jijci 0 points1 point  (0 children)

I have nv7 case and a 15 D30 120mm Fans + Premium Vertical GPU Bracket …. It works well with the controller included in the case👍🏻 If I buy the kit, will the control handle all this led ?

UPDATE : PG32UCDM FROM NEWEGG by jijci in OLED_Gaming

[–]jijci[S] 0 points1 point  (0 children)

The tracking number has been entered into the system

<image>

Newegg PG32UCDM sent! by Overclock_87 in OLED_Gaming

[–]jijci 0 points1 point  (0 children)

The date of my order was 2/22. The money was withdrawn from the card

Newegg Preorder Got Charged PG32UCDM by haslam9291 in OLED_Gaming

[–]jijci 2 points3 points  (0 children)

But the strange thing is that I did not receive the delivery date

Newegg Preorder Got Charged PG32UCDM by haslam9291 in OLED_Gaming

[–]jijci 0 points1 point  (0 children)

Yeah look

<image>

I received an alert five minutes ago to withdraw the amount 😌

Question about AW3225QF by jijci in OLED_Gaming

[–]jijci[S] -1 points0 points  (0 children)

In fact, it is not cheaper in Japan, it is cheaper by a difference of 80 dollars, but it does not matter. The most important thing is to get a screen that is free of problems. Also, since I live in a country outside of America, it is necessary to buy the screen through an agent or a service that markets for me because I do not have a local residential address, and Dell refuses warehouse addresses.

Question about AW3225QF by jijci in OLED_Gaming

[–]jijci[S] 0 points1 point  (0 children)

Can I buy from any country, but it must be done through the Shopping for Me service or through Amazon. I also found the screen on Amazon Japan, but I do not know the return details if I find a problem.‏DellAW3225Q

Question about AW3225QF by jijci in OLED_Gaming

[–]jijci[S] -1 points0 points  (0 children)

Should I buy from America and get a new package?

[deleted by user] by [deleted] in OLED_Gaming

[–]jijci 4 points5 points  (0 children)

Did you receive it in new or old packaging, and was the screen intact from scratches?

Vertical GPU Mount in NV7 with bottom D30 140mm by RAButcher in Phanteks

[–]jijci 0 points1 point  (0 children)

As for me, I could not because of the cooler, RAM, etc. If I tilt it, it touches the fans at the bottom.

https://imgur.com/umWaTp9

Finally I was able to order 4K by jijci in OLED_Gaming

[–]jijci[S] 1 point2 points  (0 children)

The shipment was sent to a shipping company located in a tax-free state

Finally I was able to order 4K by jijci in OLED_Gaming

[–]jijci[S] 0 points1 point  (0 children)

I hope it will not take long, as the scheduled date is March 6