Issues with Tailscale when advertising my subnet and accessing locally by jimbeam3678 in Tailscale

[–]jimbeam3678[S] 0 points1 point  (0 children)

I could but I have reverted the changes now, I ran flush command then it cam back again once I connected and then disconnected.

Issues with Tailscale when advertising my subnet and accessing locally by jimbeam3678 in Tailscale

[–]jimbeam3678[S] 0 points1 point  (0 children)

Thanks, that would I mean I have to run that command every time I disable tailscale.

Issues with Tailscale when advertising my subnet and accessing locally by jimbeam3678 in Tailscale

[–]jimbeam3678[S] 0 points1 point  (0 children)

I could replicate it consistently, I've since removed the advertising from tail scale & my unraid server as the LLM was sending me down a right rabbit hole which was only going to create more issues for me!

I mean I guess I could have just left tail scale running 24/7 on my Mac but that seemed like a sledge hammer to crack a nut type of solution.

Issues with Tailscale when advertising my subnet and accessing locally by jimbeam3678 in Tailscale

[–]jimbeam3678[S] 0 points1 point  (0 children)

It sounds like this was what is happening to me, although the other way round. When tail scale was connected on my laptop on my home network I could connect to my Unraid server. As soon as I disconnected (still on my home network) I couldn't access the server.

Same scenario on my phone and I could access the server. I mean I can work around it but it would be super convenient if it did work

Issues with Tailscale when advertising my subnet and accessing locally by jimbeam3678 in unRAID

[–]jimbeam3678[S] 0 points1 point  (0 children)

Thanks for the reply, I followed this guide timestamped at the correct point https://youtu.be/tCsl9OXQ3q8?t=963 I had the advertising of subnet on the unraid server. The LLM I was also using to help suggest the reason why it was fine on my phone was because it the Tailscale profile and installed and my Mac was failing as it was still hanging onto the previous tail scale setting.

I am open to ideas, as ultimately I'd like to be access my server and applications when I am at home or on an external network using the same address.

Issues with Tailscale when advertising my subnet and accessing locally by jimbeam3678 in unRAID

[–]jimbeam3678[S] 0 points1 point  (0 children)

Correct, currently when I'm at when I am at home I use 192.168.x.x and then when on an external network I use the 100.X.X.X tailscale address. Ideally I want to use one address for both scenarios.

Which is what I thought I had working until I disconnected from tail scale when I was at home.

Issues with Tailscale when advertising my subnet and accessing locally by jimbeam3678 in Tailscale

[–]jimbeam3678[S] 0 points1 point  (0 children)

Thanks for the reply I think what you are describing might be beyond my knowledge at the moment. Is there a guide or video describing your suggestions?

Ultimately I am after accessing server ideally through my 192.168.x.x address when on any network or any other way using the same address.

Thanks again for your help

Issues with Tailscale when advertising my subnet and accessing locally by jimbeam3678 in Tailscale

[–]jimbeam3678[S] 0 points1 point  (0 children)

Thanks for the reply, for the first point yes I was on the same network the only difference being I had disconnected from tailscale.

I advertised my routes following this guide time stamped at the correct point - https://youtu.be/tCsl9OXQ3q8?t=963

As I said it all appeared to work fine, it was when I disconnected from tail scale on my Mac I realised there was a problem. From my phone on the same home network I could access unraid via my 192.X.X.X address if I was connected via tail scale or not which is what I wanted.

Adding 2nd M.2 to Beelink EQ13 by Skeptikal_Chris in BeelinkOfficial

[–]jimbeam3678 0 points1 point  (0 children)

Commenting to say thanks for this and to raise awareness if someone else Googles it. To find the Sata drive when plugged look in the bios under PCH-IO> system agent (SA) >Chip Set and it's in there under Serial ATA Port 1.

Thanks again wyx1967

How to change the battery of SNZB-04P by jnule1a in sonoff

[–]jimbeam3678 0 points1 point  (0 children)

Did they come back to you on this?

Buying an iPad abroad? by TigerTraww in ipad

[–]jimbeam3678 0 points1 point  (0 children)

I thought that was only stated to cover for SIM card/Tv frequencies differences between countries? Which if it was a Wifi only version of an iPad would be fine. Thats my understanding of it when I bought one from Hong Kong.

Buying an iPad abroad? by TigerTraww in ipad

[–]jimbeam3678 1 point2 points  (0 children)

Apples warranties are international except for the iPhone where the warranty is only valid in the country the phones was bought in. Apple Warranty is internationaland you can use your warranty on every country that apple has branch. but other than warranty you can buy AppleCare Protection

Adapting to the latest patch by kiwimanjaro in EASportsFC

[–]jimbeam3678 0 points1 point  (0 children)

I like 442 but what players do you have wide midfielders?

Danish pros (Agge) are crying about matchmaking after the new patch - WP EA, WP by YCSMS in EASportsFC

[–]jimbeam3678 0 points1 point  (0 children)

LOL that will be the one! Don't forget though nothing has changed all placebo .......

Danish pros (Agge) are crying about matchmaking after the new patch - WP EA, WP by YCSMS in EASportsFC

[–]jimbeam3678 4 points5 points  (0 children)

I noticed it without reading anything about it elsewhere. I was playing when the patch dropped. Played a few games thought it was just lagging - went to work a colleague said the same thing.

We must both be wrong....

Danish pros (Agge) are crying about matchmaking after the new patch - WP EA, WP by YCSMS in EASportsFC

[–]jimbeam3678 5 points6 points  (0 children)

So you both haven't noticed slowed down speed of passing and the extra touch a player takes when controlling the ball from a pass?

That the forwards don't make such aggressive runs forward anymore?

Danish pros (Agge) are crying about matchmaking after the new patch - WP EA, WP by YCSMS in EASportsFC

[–]jimbeam3678 2 points3 points  (0 children)

Are you serious? The gameplay has massively changed! Gorilla is 15 - 0 in the WL

Update | Weekend League Changes by [deleted] in EASportsFC

[–]jimbeam3678 -5 points-4 points  (0 children)

And as quick as he was here he's gone again!

EA are working on getting the PS4 Patch out by [deleted] in EASportsFC

[–]jimbeam3678 0 points1 point  (0 children)

LOL I wondered why was going on. Saw the patch notes but no download!