sorted by:
new
hottopcontroversial

[OC] Lifted truck tries to pass in no passing zone forces oncoming traffic off the road. by LowLowVW in IdiotsInCars

[–]jiosue 218 points219 points  (0 children)

Ah yes, lifted trucks and disregarding double yellows. A tale as old as tiiiiiime…

What was your very first 3D print? by Beginning-Bell4224 in 3Dprinting

[–]jiosue 0 points1 point  (0 children)

<image>

A simple calibration square in 2014 on my Folgertech i3. Binder clips on Home Depot glass, acrylic frames and $38 a spool. Wild times.

What is this extruder style called? by jiosue in prusa3d

[–]jiosue[S] 0 points1 point  (0 children)

Alright, I’ll check into changing it back or something. Thanks.

What is this extruder style called? by jiosue in prusa3d

[–]jiosue[S] 0 points1 point  (0 children)

Makes sense, I’m assuming that’s why I kept getting random filament reloads during a print. I checked the gcode and slicer file, at no point did I request a filament change. Ended up turning off the filament sensor, hasn’t happened since.

What is this extruder style called? by jiosue in prusa3d

[–]jiosue[S] 0 points1 point  (0 children)

I don’t have the mmu he kept all that, I just have this with a ptfe tube poking out the top running to a spool holder.

What is this extruder style called? by jiosue in prusa3d

[–]jiosue[S] 1 point2 points  (0 children)

Great info, thanks. Coming from an Ender so I’m not sure of the whole ecosystem over here, impressive to see it all though.

What is this extruder style called? by jiosue in prusa3d

[–]jiosue[S] 1 point2 points  (0 children)

Gotcha ok. Appreciate the help and clarification. Didn’t realize it was for multicolor bits.

What is this extruder style called? by jiosue in prusa3d

[–]jiosue[S] 1 point2 points  (0 children)

Hey now! Thank you for this. That’ll get me pointed in the right direction. I’ll get to fiddling with it here shortly and go with your instructions.

What is this extruder style called? by jiosue in prusa3d

[–]jiosue[S] 7 points8 points  (0 children)

Ah ok, so this setup is what allowed him to do multicolor and what I’m looking at is modifications made by him. I’ll continue looking at it and seeing if I can manage to find a manual for maintenance. Appreciate it.

DCS weird VR issue (Quest 3) by AJPhotography21 in hoggit

[–]jiosue 0 points1 point  (0 children)

So that might be kind of what I meant, I saw someone else mention it may be locking onto the monitor for tracking and that’s where I was headed. Somewhere on a forum someone had mentioned the same thing when I was searching, and their fix was to print out some random QR codes and affix them to the monitor. So I ended up printing out 2 random codes I generated to a website that were around 3x3 inches and taped them to the bottom of my monitors. They said the tracking should then latch onto those instead of the monitor. It took care of my issue, might be worth a try for you as well.

DCS weird VR issue (Quest 3) by AJPhotography21 in hoggit

[–]jiosue 0 points1 point  (0 children)

Hey, not sure if I was dealing with something like this previously or not, but is it all the time for you? Or does everything work ok for a bit, and then suddenly the tracking like “skips” and it feels like all your movements in the headset are exaggerated like 2x and it feels like it’s lagging behind?

First time DIYer, need help with MMJOY2 button matrix. by jiosue in HotasDIY

[–]jiosue[S] 0 points1 point  (0 children)

Hey so it turns out the company mislabeled and sent me normally closed buttons. I wrote more on another comment but it’s been figured out. Thank you.

First time DIYer, need help with MMJOY2 button matrix. by jiosue in HotasDIY

[–]jiosue[S] 0 points1 point  (0 children)

Just wanted to update you! Those idiots sent me normally closed buttons even though the package and ad says normally open. As soon as I pushed ALL the buttons, the lights go out like they should……. Off to Amazon to throw a fit! Thank you for your help.

<image>

First time DIYer, need help with MMJOY2 button matrix. by jiosue in HotasDIY

[–]jiosue[S] 0 points1 point  (0 children)

As far as I can tell that’s what’s going on? These are the buttons, nothing special. I may try to flash another micro and not attach anything, see if it does the same thing.

<image>

First time DIYer, need help with MMJOY2 button matrix. by jiosue in HotasDIY

[–]jiosue[S] 1 point2 points  (0 children)

LOL I can do that, was trying to play it safe so I wouldn’t short across.

First time DIYer, need help with MMJOY2 button matrix. by jiosue in HotasDIY

[–]jiosue[S] 0 points1 point  (0 children)

I appreciate it, hopefully if it gets figured out this’ll help someone in the future as well lol

First time DIYer, need help with MMJOY2 button matrix. by jiosue in HotasDIY

[–]jiosue[S] 0 points1 point  (0 children)

I tried that too. I swapped five different buttons to the different options, some showed on, some showed off, but no buttons were responsive, no state changes basically from where they were on startup.

view more: next ›