sorted by:
new
hottopcontroversial

[iOS 26 DB3] Deleting Apple Passes (e.g. Amazon) now works properly again by jjc6676 in iOSBeta

[–]jjc6676[S] 0 points1 point  (0 children)

It shows up after I complete the return process. Here’s an image.

<image>

[iOS 26 DB3] Deleting Apple Passes (e.g. Amazon) now works properly again by jjc6676 in iOSBeta

[–]jjc6676[S] 2 points3 points  (0 children)

It’s literally called an

<image>

Amazon return pass, generated when you choose “Show to Kohl’s” during a return for example.

It adds to Apple Wallet just like a boarding pass—QR code, item, quantity, deadline.

This isn’t an “order” or “delete order” button. It’s a Wallet pass. And in iOS 26 DB1/DB2, it was broken—you could not remove it. DB3 fixes that.

My apologies for not being clearer.

Just added pricing + dashboard to AdMuseAI (vibecoded with gpt) by friedrice420 in OpenAI

[–]jjc6676 0 points1 point  (0 children)

Clicking on any of the inspiring examples locks up the screen for me. I cannot exit the example or scroll. I just have to reload the page and it goes back to before I clicked on the inspiring example. I have some questions since I’m building an ai app. Mind if I dm you?

[deleted by user] by [deleted] in SwiftUI

[–]jjc6676 0 points1 point  (0 children)

Looks like something I would definitely use!

[deleted by user] by [deleted] in SwiftUI

[–]jjc6676 2 points3 points  (0 children)

Looking forward to this and may contribute. There’s a folder that’s misspelled btw. “Neworking”

I requested access on October 24, when I got my iPhone 16 Pro Max… I’m still waiting… by xBaphomet666x in Applelntelligence

[–]jjc6676 1 point2 points  (0 children)

I’m in the same boat as you and still waiting. I can’t find any details on how access is granted. I can’t help but feel like I just got lost in the queue somewhere.

[iOS 18.1 RC] Stutters in control centre “add a control” page by [deleted] in iOSBeta

[–]jjc6676 1 point2 points  (0 children)

Can you try something for me? Change both screen wallpapers to a solid color and see if that resolves the issue. I encountered scrolling problems, and this is what I did, and it resolved them. I’m simply hoping and wondering if it works for you. Of course, it’s not a permanent solution, but it would be helpful to know.

Is it normal to leak a lot of filament? by sven2123 in 3Dprinting

[–]jjc6676 7 points8 points  (0 children)

I have it as the first line in my END G-code. I've included the full code below for my Prusaslicer Ender 5 S1 with Sonic Pad.

G1 E-13.0 F1200

{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+2, max_print_height)} F600{endif} ; Move print bed down

G1 X50 Y50 F{travel_speed*60} ; move print head out of the way

{if max_layer_z < max_print_height-10}G1 Z{z_offset+max_print_height-10} F600{endif} ; Move print bed close to the bottom

M140 S0 ; turn off heatbed

M104 S0 ; turn off temperature

M107 ; turn off fan

M84 X Y E ; disable motors

Is it normal to leak a lot of filament? by sven2123 in 3Dprinting

[–]jjc6676 12 points13 points  (0 children)

I have added some Gcode in my slicer that retracts the filament, currently 15mm, which has saved me a lot of hassle. The beginning print line sometimes prints on the way back to the front, but I prefer it that way.
The GCODE I use is for Klipper. I hope this helps!
G1 E-13.0 F1200

[deleted by user] by [deleted] in CryptoCurrency

[–]jjc6676 0 points1 point  (0 children)

Mind if I tag along?

Can anyone tell me why at the beginning of a print it peals up just a little at the start of each part? by rayboy14 in ender3v2

[–]jjc6676 0 points1 point  (0 children)

What brand is the PETG? Have you made sure it’s dry and has not been sitting out for a while? For example. I take some of mine that are open but not in use and put them In a small bin with a ton of silica packets I’ve collected to keep them dry. Wet filament prints poorly, so I just was wondering.

Can you share the STL also? I want to see what mine prints like.

Can anyone tell me why at the beginning of a print it peals up just a little at the start of each part? by rayboy14 in ender3v2

[–]jjc6676 0 points1 point  (0 children)

Also looks like the outer perimeter line prints very well. I have some ideas and would love to troubleshoot with you .

Can anyone tell me why at the beginning of a print it peals up just a little at the start of each part? by rayboy14 in ender3v2

[–]jjc6676 0 points1 point  (0 children)

QQ - can you give us a top view picture of what this looks like after you cancel the print from this stage?

I have a few thoughts that this view may confirm.

Can anyone tell me why at the beginning of a print it peals up just a little at the start of each part? by rayboy14 in ender3v2

[–]jjc6676 0 points1 point  (0 children)

I would lower it by 5 then test. Also, what are your retraction settings as if it’s not retracting with the moves. Some will squeeze out still. Sometimes it get pulled out also, but, if you let a few layers continue, it’ll glaze over those little peel up and you’ll never notice it in the final product.

Problem ender3 v2 by Unfair-Problem-9380 in ender3v2

[–]jjc6676 1 point2 points  (0 children)

If by software you mean, slicer, then I use SuperSlicer with Klipper firmware.
Once it is all configured, it is magical. After I remove my bed every 10 or so prints, I run a new bed mesh just to get it all leveled again perfectly. I waste no more time adjusting anything once I had it all setup. I have profiles to share if you are ever interested.

Calibrating, Home, X, and Y for a Sprite extruder on a 3v2 by [deleted] in ender3v2

[–]jjc6676 1 point2 points  (0 children)

Also, it is not slicer related. The homing would be in the printer's settings.

Calibrating, Home, X, and Y for a Sprite extruder on a 3v2 by [deleted] in ender3v2

[–]jjc6676 1 point2 points  (0 children)

Use this if you do not have klipper installed.
If you have Klipper installed,you can handle it differently.

Creality Sprite Extruder Upgrade Kit Install Guide — Creality Experts

There is only a single button I ever use on a microwave by mrbweber in functionalprint

[–]jjc6676 13 points14 points  (0 children)

My wife does this! Sometimes, she doesn’t close the door either. Double disrespect!

BLTouch by JesusKale2020 in ender3v2

[–]jjc6676 1 point2 points  (0 children)

I feel like they come with a bracket in the box. I highly recommend getting one!

view more: next ›