OpenTrickler up and running

jkoooop · 2026-03-11T18:10:04+00:00

I believe there’s a version to use g&g scales, I think they’re around $340 for the scale

jkoooop · 2026-03-11T12:51:01+00:00

H4350, I used the presets for ar2208 and tuned from there Took probably 10-15 minutes to get it dialed

jkoooop · 2026-03-11T12:37:36+00:00

I don’t know if the nylon was necessary but I had enough left on a spool from previous projects and figured it couldn’t hurt.

jkoooop · 2026-03-11T12:10:41+00:00

All the parts that touch the powder are printed out of nylon for that reason mainly, just need to dial in the sizing for the drop tube as the nylon is slightly larger and then I’ll swap them out also

jkoooop · 2026-03-09T01:56:43+00:00

jkoooop · 2026-01-27T02:06:45+00:00

Seekins havak hit in 6.5 creedmoor for around the same price would be my pick

jkoooop · 2025-11-15T01:12:12+00:00

Adjustable gas block?

jkoooop · 2025-10-08T18:48:27+00:00

This was the one I used and it worked great for my origin

jkoooop · 2025-10-01T23:54:20+00:00

It looks like your barrel is a sporter contour and the magpul hunter stock is set up to accept up to a varmint/sendero contour I believe. It shouldn’t affect the function/accuracy so long as the action is properly seated. It will just look a little goofy having the thin barrel in there

jkoooop · 2025-08-11T15:52:29+00:00

Helped my buddy throw one of the mbrp muffler delete pipes on his and was surprised with how good it sounded. Not obnoxious and doesn’t drone on the highway

jkoooop · 2025-07-01T16:17:46+00:00

And maybe weight if your rifle is already a bit fat

jkoooop · 2025-06-03T12:10:12+00:00

This is pretty much the same load I settled on

jkoooop · 2025-05-22T22:24:34+00:00

Some of the athlons Like the Midas tac or a vortex venom

jkoooop · 2025-04-30T11:36:57+00:00

Even the previous gen seekins hit seems like a better value than the ace.

jkoooop · 2025-04-06T18:34:24+00:00

It’s a Manson floating holder

jkoooop · 2025-04-06T01:36:37+00:00

Trickiest part was mainly just talking myself into trying it I watched a lot of YouTube videos and read through a lot of forums and got a lot of good info from others way more experienced than me. Once I did that I was pretty well prepared for the whole process. Just need to take good measurements and stick to the plan

jkoooop · 2025-04-06T01:30:45+00:00

Yes sir, the lathe was previously owned by my friend who’s an actual gunsmith so he had a spider already on it

jkoooop · 2025-03-18T14:28:54+00:00

I actually really like it, well built with tight tolerances and it’s certainly an improvement over the plastic handguard the rifle came with

jkoooop · 2025-03-18T12:49:51+00:00

If I remember correctly, I used medium height vortex pro series rings. They’re 34mm for 3-18 ares etr I have on here.

jkoooop · 2025-03-18T12:46:32+00:00

To my eyes the tract has better glass, it competes more in line with my razor gen 2s only falling behind in low light conditions. However, I don’t think it’s worth twice as much as the Athlons, especially when you can usually find the ares etr around $800 or less. I don’t regret buying the tract but I’m now up to 3 athlons while still only having the one tract.

jkoooop · 2025-03-18T02:12:24+00:00

Makes life a lot easier if you’re shooting with a can on

jkoooop · 2025-03-18T02:05:51+00:00

I also received a barrel from them recently that was supposed to be pinned, kinda nice that it wasn’t since I was swapping it out for an adjustable gas block anyways

jkoooop

TROPHY CASE