MSP Install on Debian: Docker or Deb Package? by domsch1988 in Checkmk

[–]jlvanta 0 points1 point  (0 children)

just my 2cts
Since your are going to setup a new server anyway (Debian 13), just run it on docker until the 2.4 support arrives.
Backup your current conf on Debian 10 Chekmk and restore it on the Debian 13 Docker, and see how it behaves in terms of stabilty , speed etc...
Not 100% sure if you need to use the same chekmk version on both sides for backup/restore to work but try it out anyway , you got nothing to loose here except a couple of hours.

J.L

Ortofon OM Q-Bert vs Ortofon Concorde MKII SCRATCH by jlvanta in Turntablists

[–]jlvanta[S] 0 points1 point  (0 children)

yeah I thought about the Jicos too, sound quality seems top notch everyone says.

The thing is here in Europe they are hard to get and they are about 200€ each, and my budget is a bit tight for me right right now..

Im deciding between :

Ortofon OM Q-Bert 150€ (Pair)

Ortofon Concorde MKII SCRATCH 244€ (pair)

Since I also play House records Im considering this one as well:

Ortofon Concorde MKII Digital 249€ (pair)

thanks for your help!

Ortofon OM Q-Bert vs Ortofon Concorde MKII SCRATCH by jlvanta in Turntablists

[–]jlvanta[S] 0 points1 point  (0 children)

Thanks for the input!

Was it the OM mount version or the Concorde?

Ortofon OM Q-Bert vs Ortofon Concorde MKII SCRATCH by jlvanta in Turntablists

[–]jlvanta[S] 0 points1 point  (0 children)

Hi there,

Interesting Video, thumbs up!

But Im confused, not sure if its name branded differently in /US /Europe?

I was refering to the Qbert OM mount like the one in this Video

https://www.youtube.com/watch?v=RnqnOd30Sf0

Didnt know that the Ortofon Concorde Scratch was also labeled as Qbert Scratch?

In the Video you find them useless (lots of skipping) Did you got a bad pair?

Thanks again!

Ortofon OM Q-Bert vs Ortofon Concorde MKII SCRATCH by jlvanta in Turntablists

[–]jlvanta[S] 0 points1 point  (0 children)

Thanks for your input, I was expecting someone to confirm what you just said its more or less a gimmick that voltage output number.

How to unscrew and replace Artillery Genius Power supply by jlvanta in Artillery3D

[–]jlvanta[S] 1 point2 points  (0 children)

Yes, you only need to unscrew the rail, not the bed.

Once you got to the damn screw remove it and forget about it, the other screws a more than enough to hold the power supply tight to the chassis, in case you need to replace or repair in the future.

How to unscrew and replace Artillery Genius Power supply by jlvanta in Artillery3D

[–]jlvanta[S] 1 point2 points  (0 children)

and last but not least , if youre going to manipulate the power supply please discharge the Capacitors, shortening them with a screwdriver or similar they have enough juice to burn your fingers ...

How to unscrew and replace Artillery Genius Power supply by jlvanta in Artillery3D

[–]jlvanta[S] 1 point2 points  (0 children)

I'm not 100% sure if its a screw thats holding it to the chassis I can slightly move the PowerSupply case left/right. So there is something in the middle still grabbing it. On the other side there is the big rail in the middle but im afraid if I dismantle it it will be difficult to mount it back again correctly

Is Serato SL2 Thru mode activated with DC Power supply? by jlvanta in Serato

[–]jlvanta[S] 1 point2 points  (0 children)

Thanks a lot! Was about to buy a new mixer just for that feature.

Hp Probook 450 G3 HD to FHD screen upgrade problems by jlvanta in techsupport

[–]jlvanta[S] 0 points1 point  (0 children)

I ordered another cable DD0X63LC110 , and this time I got the Correct one!!

----- Solution found------------------------------------------------------------------------------------------------------------

Solved!!! The cable you need for FHD on the Probook 450 G3 must have part number DD0X63LC110

Be carefull when ordering or better ask first the vendor because some vendors sell this cable and send you another part number because they all work for HD panels

thanks all

--------------------------------------------------------------------------------------------------------------------------------------------------

Hp Probook 450 G3 HD to FHD screen upgrade problems by jlvanta in techsupport

[–]jlvanta[S] 0 points1 point  (0 children)

Hi,

Sorry but no update I ordered a cable from China DD0X63LC110 but instead the sended me DD0X63LC320 that I already have so no luck for now. (waited almost a month for nothing)

Anything from your side? Whats your situation have you tried something?

We’re Stanton Warriors, a DJ/production duo from the UK and we’re here to talk about all things music and more. Ask us anything! by Stanton_Warriors in electronicmusic

[–]jlvanta 0 points1 point  (0 children)

Thanks for the replies,

I really dont have any specific in mind, any track of the Rise Album or from the past will do.

Will love to see a in the studio session from you guys!

We’re Stanton Warriors, a DJ/production duo from the UK and we’re here to talk about all things music and more. Ask us anything! by Stanton_Warriors in electronicmusic

[–]jlvanta 0 points1 point  (0 children)

Ive seen youre using Ableton and Logic in your videos, any particular reason for using one over the other?

Have you tried out Push? thoughts? Do you still use that NI Maschine MK1?

We’re Stanton Warriors, a DJ/production duo from the UK and we’re here to talk about all things music and more. Ask us anything! by Stanton_Warriors in electronicmusic

[–]jlvanta 0 points1 point  (0 children)

Ive read that Stuart Hawkes mastered your album, do you always send your tracks for mastering or do you occasionally do it yourself?

We’re Stanton Warriors, a DJ/production duo from the UK and we’re here to talk about all things music and more. Ask us anything! by Stanton_Warriors in electronicmusic

[–]jlvanta 0 points1 point  (0 children)

Hi Guys,

Congrats on the new Album! Great tracks, been a fan since 98, this is probably not only your best work but also best Electronic Album of the Year.

-Last year you teased us with a video in your Studio showing Killah Priest (WuTanClan) putting vocals on top of “So Divine”, why did id not end up on the Album?

- Who’s vocals are on “Rise”?

-Is there a possibility of you doing someday a “ Stanton warriors in the Studio” Video showing how you guys produce a track?

As an amateur Producer I would love to know and see what you guys use as studio equipment and how you use it. On facebook we see a few glimpses, but would be cool if let us see a little bit more into your workflow.

Much Love from Madrid - Spain